skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@sk yworksinc.com ? www.skyworksinc.com 201124b ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? may 30, 2014 1 data sheet smv1705: hyperabrupt tuning varactors supplied on film frame and waffle packs applications ? wide bandwidth vcos ? vhf and uhf tv tuners ? analog phase shifters features ? designed for high volume, low-cost battery applications ? low series resistance ? high capacitance ratio ? available as: ? full wafer on film frame (smv1705-099) ? dice in waffle packs (SMV1705-000) ? small footprint chip size: 12 x 12 x 5.5 mils s kywork s green? product s are compliant with all applicable legi s lation and are halogen-free. for additional information, refer to skyworks de?ition of green , document number s q04-0074. description skyworks smv1705 varactors are silicon hyperabrupt junction varactor diodes specifically designed for battery operation. these devices have a high capacitance ratio and low series resistance, which makes them appropriate for low phase noise voltage controlled oscillators (vcos) operating at wireless frequencies of 2.5 g hz and higher. the smv1705-099 is supplied as 100 percent electrically tested, fully singulated wafers mounted on a film frame. the SMV1705-000 is supplied as a 100 percent electrically tested die in waffle packs. the absolute maximum ratings of the smv1705 varactors are provided in table 1. electrical specifications are specified in table 2. typical performance characteristics are provided in figures 1 and 2. the spice model for the smv1705 die is shown in figure 3 and the associated model parameters are provided in table 3. die mechanical characteristics are listed in table 4. downloaded from: http:///
data sheet ? SMV1705-000 and smv1705-099: hyperabrupt tuning varactors skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@sk yworksinc.com ? www.skyworksinc.com 2 may 30, 2014 ? skyworks proprietary and confidential information ? products a nd product information are subject to change without notice ? 201124b table 1. SMV1705-000/-099 absolute maximum ratings (note 1) parameter symbol minimum typical maximum units power dissipation @ cathode temperature of 25 c p dis 250 mw reverse voltage v r 12 v forward current i f 20 ma junction temperature t j C55 +150 ? c storage temperature t st g C55 +150 ? c note 1: exposure to maximum rating conditions for extended periods may reduce device reliability. there is no damage to device with on ly one parameter set at the limit and all other parameters set at or below their nominal value. exceeding any of the limits listed here may result in permanent damage to the d evice. caution : although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this devi ce must be protected at all times from esd. static charges may eas ily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions should be used at all times. table 2. SMV1705-000/-099 electrical specifications (note 1) (note 2) (cathode temperature = 25 ? c, unless otherwise noted) parameter symbol test condi tion min typical max units reverse breakdown voltage v br i r = 10 a 12 v reverse leakage current i r v r = 8 v 20 na junction capacitance c j 1 c j 4 v r = 1 v, f = 1 mhz v r = 4 v, f = 1 mhz 17.3 5.3 18.3 6.1 19.3 6.6 pf pf capacitance ratio c j 1 /c j 4 2.8 3.0 C series resistance r s v r = 1 v, f = 470 mhz 0.32 note 1: performance is guaranteed only under the conditions listed in th is table and is not guaranteed over the full operating or storage temperature ranges. operatio n at elevated temperatures may reduce reliability of the device. note 2: the SMV1705-000 and smv1705-099 are 100% tested for junction capa citance, capacitance ratio. reverse leakage current, and brea kdown voltage. electrical rejects of the smv1705-099 devices (singulated wafer on film frame) are identified with black ink. typical performance characteristics 012345 0 10 15 5 20 25 30 35 varactor voltage (v) capacitance (pf) figure 1. capacitance vs voltage (t j = 25 c) C40 C20 0 +20 +40 +60 +80 temperature (c) percent of variation (%) C4 C3 C2 C1 0 +1 +2 +3 +4 +5 v r = 1 v v r = 2.5 v v r = 4 v figure 2. relative capacitance change vs temperature downloaded from: http:///
data sheet ? SMV1705-000 and smv1705-099: hyperabrupt tuning varactors skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@sk yworksinc.com ? www.skyworksinc.com may 30, 2014 ? skyworks proprietary and co nfidential information ? products and product information are subject to change without notice ? 201124b 3 diode varactor_diode area = 1 model = diode_model mode = nonlinear ind l s l = l s res r s r = r s capc p c = c p port p_anode port = 1 port p_cathode port = 2 diodemdiode_model i s = 1.00e-14 r s = 0 n = 1t t = 0 c jo = c jo m = mv j = v j e g = 1.11 x ti = 3 k f =0 a f =1 f c = 0.5 b v = 22 i bv = 1e-3 i sr = 0 n r = 2 i kf = 0 n bv = 1 i bvl = 0 n bvl = 1 t bv1 = 0 t nom = 27 f fe = 1 figure 3. spice model table 3. spice model parameters part number c jo (pf) v j (v) m c p (pf) r s ( ) l s (nh) SMV1705-000 31 3 2 0 0.32 0.15 smv1705-099 31 3 2 0 0.32 0.15 table 4. smv1705 die characteristics part number quantity of good dice per wafer chip size chip thickness typical anode contact diameter (in) (mm) (in) (mm) (in) (mm) SMV1705-000 n/a 0.012 x 0.012 0.3048 x 0.3048 0.0055 0.0005 0.1397 0.0127 0.00675 0.17145 smv1705-099 60,000 minimum 65,000 typical 0.012 x 0.012 0.3048 x 0.3048 0.0055 0.0005 0.1397 0.0127 0.00675 0.17145 package outline drawings table 4 identifies the die part numbers with their corresponding quantity per wafer and chip measurements. the package outline die drawing for the SMV1705-000 (dice in waffle packs) is shown in figure 4. the package outline die drawing for the smv1705-099 (full wafer on film frame) is shown in figure 5. the SMV1705-000 is supplied in quantities of 100 pieces per waffle pack. downloaded from: http:///
data sheet ? SMV1705-000 and smv1705-099: hyperabrupt tuning varactors skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@sk yworksinc.com ? www.skyworksinc.com 4 may 30, 2014 ? skyworks proprietary and confidential information ? products a nd product information are subject to change without notice ? 201124b 0.012 0.002 in (0.3048 0.0508 mm) 1 2 1 2 0.012 0.002 in (0.3048 0.0508 mm) 0.0055 0.0005 in (0.13 9 7 0.0127 mm) ? 0.00 6 7 in (0.1702 mm) s1612 figure 4. SMV1705-000 die outline drawing (dice in waffle packs) downloaded from: http:///
data sheet ? SMV1705-000 and smv1705-099: hyperabrupt tuning varactors skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@sk yworksinc.com ? www.skyworksinc.com 201124b ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? may 30, 2014 5 g rip ring s1 6 11 0.003 (0.076 mm) separation between die 3.940 (100 mm) wafer dia. 5.520 (140.2 mm) inner ring i.d. 5.981 (151.92 mm) outer ring o.d. 0.236 (5.99 mm) ring thickness 0.003 (0.076 mm) nom. separation between die wafer film frame description wafer on nitto tape color: light blue thickness: 2.2C3 mils tensile strength: 6.6 (lbs. in width) ring material: plastic figure 5. smv1705-099 die outline drawing (full wafer on film frame) downloaded from: http:///
data sheet ? SMV1705-000 and smv1705-099: hyperabrupt tuning varactors skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@sk yworksinc.com ? www.skyworksinc.com 6 may 30, 2014 ? skyworks proprietary and confidential information ? products a nd product information are subject to change without notice ? 201124b ordering information model name manufacturing part number SMV1705-000 (dice, 100 per waffle pack) smv1705-099 (singulated wafer on film frame) SMV1705-000 smv1705-099 copyright ? 2009, 2014 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyw orks solutions, inc. (skyworks) products or services. these m aterials, including the information co ntained herein, are provided by skyworks as a service to its customers and may be used for info rmational purposes only by the cu stomer. skyworks assumes no res ponsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentat ion, products, services, specific ations or product descriptions at any time, without notice. sk yworks makes no commitment to update the materials or information and shall have no responsi bility whatsoever for conflicts, incompatibilities, or other diff iculties arising from any future changes. no license, whether express, implied, by es toppel or otherwise, is granted to any in tellectual property rights by this document . skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, re production or use of skyworks products, information or mate rials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are pr ovided as is without warranty of any kind, whether express, implied, statutory, or otherwise, includin g fitness for a particular purpose or use, merchantability, performance, quality or non-infrin g ement of any intellectual property ri g ht; all such warranties are hereby expressly disclaimed. skyworks does not warrant the accuracy or completeness of the information, text, g raphics or other items contained within these ma terials. skyworks shall not be liable for any dama g es, includin g but not limited to any special, indirect, incidental, statutory, or consequential dama g es, includin g without limitation, lost revenues or lost profits that may result from the use of the materials or information, wheth er or not the recipient of mat erials has been advised of the possibility of such dama g e. skyworks products are no t intended for use in medical, lifesaving or life-su staining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyw orks customers using or selli ng skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications us ing skyworks products, which may deviate from published specifi cations as a result of design de fects, errors, or operation of products outside of published pa rameters or design specifications. customers sh ould include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product de sign, or damage to any equipment resulting from the use of skyw orks products outsid e of stated published specifications or parameters. skyworks and the skyworks symbol are trademarks or registered trad emarks of skyworks solutions, inc., in the united states and other countries. third-party brands and names are for identification purposes only, and are the pr operty of their respective owners. additi onal information, including relevant terms and conditions, posted at www.skyw orksinc.com, are incorporated by reference. downloaded from: http:///
|
