www.dyelec.com plastic abs rrm 0 5.0 =30 =30 (note 3) @if=0.4a 0.95 0.8 0.5 ABS2 thru abs10 single phase surface mount glass passivated bridge rectifier features glass passivated die construction low forward voltage drop high current capability high surge current capability designed for surface mount application plastic material - ul flammability 94v - mechanical data case: sopa - 4, molded terminals: plated leads solderable per mil - std - 202, method 208 polarity: as marked on case mounting position: any marking: type number maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. type number symbol ABS2 abs4 abs6 abs8 abs10 units peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v 200 400 600 800 1000 v v rwm v dc rms reverse voltage v rms 140 280 420 560 700 v i o a non - repetitive peak forward surge current 8.3ms single half sine - wave superimposed on rated load (jedec method) i fsm 30 a forward voltage per element v fm v peak reverse current at rated dc blocking voltage i r 500 ua typical thermal resistance per leg r ja 62.5 /w r jl 25 operating and storage temperature range t j ,t stg - 55to+150 version:01 1 of 2 0.8amp average rectified output current (note 1)@t a (note 2)@t a 3. measured at 1.0 mhz and applied reverse voltage of 4.0v d.c. note:1. mounted on glass epoxy pc board with 1.3mm 2 solder pad. 2. mounted on aluminum substrate pc board with 1.3mm 2 solder pad. 0.032(0.7) 0.024(0.5) 0.189(4.8) 0.165(4.2) 0.181(4.6) 0.058(1.5) 0.046(1.2) abs max 0.0078(0.2) 0.010(0.25) 0.006(0.15) 0.209(5.3) 0.268(6.8) 0.236(6.0) 0.165(4.2) 0.150(3.8) dimensions in inches and (millimeters) 0.268(6.8) 0.236(6.0) =125 =25 a @t a @t
fig. 4 typical reverse characteristics ABS2 thru abs10 version:01 2 of 2 0 0.2 0.4 0.6 0.8 1.2 0 306090120150 average forward current (a) ambient temperature ( o c) fig.1 maximum forward current derating curve 10 20 30 40 50 110100 peak forward surge current (a) number of cycles at 60 hz fig. 3 maximum non-repetitive forward surge current 8.3ms single half sine-wave 0.01 0.1 1 10 100 0 20 40 60 80 100 120 140 instantaneous reverse current (ua) =75 t =25 t t =125 percent of rated peak reverse volyage(%) a a a 1.0 1.4 fig. 2 typical forward characteristic 0.1 1 instantaneous forward current (a) forward voltage (v) 0 0.2 0.4 0.6 0.8 1.0 1.2 10 www.dyelec.com
|
