1 publication order number : nsvr351sdsa3/d ? semiconductor components industries, llc, 2016 july 2016 - rev. p1 www.onsemi.com this document contains information on a new product. specifications and information herein are subject to change without notice. nsvr351sdsa3 advance information schottky barrier diode for mixer and detector this schottky barrier diode is design ed to realize compact and efficient designs. two schottky barrier diodes are incorporated in one sc-59 package. the use of dual schottky barrier diodes can reduce both system cost and board space. this schottky barrier diode is aec-q101 qualified and ppap capable for au tomotive applications. features ?? series connection of 2 elements in a small-sized package ? small interterminal capacitance (c = 0.69 pf typ) ? small forward voltage ( v f = 0.23 v max) ? pb-free, halogen free and rohs compliance ? aec-q101 qualified and ppap capable typical applications ? level detector for radio specifications absolute maximum ratings at ta = 25c (note 1) parameter symbol value unit reverse voltage v rm 5 v forward current i f 30 ma operating junction and storage temperature t j, t stg ? 55 to ? 125 ? c note 1 : stresses exceeding those listed in the maximum rati ngs table may damage the device. if any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. sc-59 / cp3 3 1 2 3 12 1 : anode 2 : cathode 3 : anode / cathode electrical connection ordering information see detailed ordering and shipping information on page 4 of this data sheet 5 v , 30 m a c = 0.69 pf typ shottky barrier diode marking
nsvr351sdsa3 www.onsemi.com 2 electrical characteristics at ta = 25c (note 2) parameter symbol conditions value unit min typ max forward voltage v f i f = 1 ma 0.23 v forward current i f v f = 0.5 v 30 ma reverse current i r v r = 0.5 v 25 a interterminal capacitance c v r = 0.2 v, f = 1 mhz 0.69 0.9 pf note 2 : product parametric performance is indicated in the elec trical characteristics for the listed test conditions, unless o therwise noted. product performance may not be indicated by the electrical characteristics if operated under different conditions. note 3 : the specifications shown above are for each individual diode.
nsvr351sdsa3 www.onsemi.com 3 package dimensions unit : mm 1 : anode 2 : cathode 3 : anode / cathode sc-59 / cp3 case 318bj issue o xxx m xxx = specific device code m = date code = pb-free package generic marking diagram *this information is generic. please refer to device data sheet for actual part marking. 1 *for additional information on our pb-free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. (note: microdot may be in either location) notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. dimensions d and e1 do not include mold flash, pro- trusions, or gate burrs. mold flash, protrusions, or gate burrs shall not exceed 0.20 per side. 4. dimensions d and e1 are measured at the outermost extreme of the plastic body. 5. dimensions b and c apply to the flat section of the lead between 0.10 and 0.20 from the tip. dim a min max 0.95 millimeters a1 e 0.95 bsc a2 0.20 0.40 1.35 0.00 0.10 b 0.35 c d 2.75 3.05 0.50 0.10 0.20 e 2.30 e1 l 0.35 0.75 2.70 1.35 1.65 b e d 2 3 1 a1 a seating plane c side view a m 0.10 c top view a 3x e1 e l 3x a2 c 3x end view 1.00 3x dimensions: millimeters soldering footprint* 0.95 recommended pitch 3.40 0.80 3x
nsvr351sdsa3 www.onsemi.com 4 on semiconductor and the on semiconductor logo are trademarks of semiconductor components industries, llc dba on semiconductor or its subsidiaries in the united states and/or other countries. on semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and othe r intellectual property. a listing of on semiconductor?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. on semiconductor reserves the right to make changes without further notice to any products herein. on semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does on semiconductor assume any liability arising out of the app lication or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. buyer is responsible for its products and applications using on semiconductor products, including compliance with all laws, regulations and safety require ments or standards, regardless of any support or applications information provided by on semiconductor. ?typical? parameters which may be provided in on semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. on semiconductor does not convey any license under its patent rights nor the rights of others. on semiconductor products are not designed, intended, or authorized for use as a critical component in life sup port systems or any fda class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended fo r implantation in the human body. should buyer purchase or use on semiconductor products for any such unintended or unauthorized application, buyer sh all indemnify and hold on semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, d amages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that on semiconductor was negligent regarding the design or manufacture of the part. on semiconductor is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resal e in any manner. ordering information device marking package shipping NSVR351SDSA3T1G ch sc-59 / cp3 ? pb-free / halogen free) 3,000 / tape & reel ? for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d. http://www.ons emi.com/pub_link/collateral/brd8011-d.pdf
|
