85 updated oct. 01, 2018. new specifications ordering information AX92350 (p/n: e392350100) vision i/o card accessories e981806008 44-pin din-rail terminal board dm44-ap12 e981806013 44-pin d-sub cable, l=1m whdm44/1.0-6954 e981806014 44-pin d-sub cable, l=2m whdm44/2.0-6954 e981806015 44-pin d-sub cable, l=3m whdm44/3.0-6954 *specifications and certifications are based on options and may vary. AX92350 integrated vision i/o - 4 ch trigger input - 4 or 8 ch trigger output - 4 ch led lighting control (led trigger output channels are defined by software settings) - 1 ch quadrature encoder input - 8 ch isolated di, 8 ch isolated do - 1 ch auto measurement function programmable interrupt functions pci express x1 compliant flexible design for vision inspection features real-time vision i/o card with multifunction introduction the AX92350 integrates various i/o features for machine vision applications, including trigger input and output with microsecond-scale real-time control, an auto measurement timer, as well as led lighting control with dimming support. it also provides an encoder input function suited for conveyor applications in factory automation. the AX92350 can fit in the pci express slot of any vision control system to simplify deployment and maintenance of your machine vision platform. isolated digital input channels 8 ch type sink/source input voltage on (logic 1): 10 ~ 30 vdc or dry contact off (logic 0): 0 ~ 3 vdc impedance 7.5k isolated digital output channels 8 ch output type sink, open collector supply voltage 5-30 vdc sink current max. 200 ma per channel isolated trigger input channels 4 ch type sink input range on (logic 1): 3 ~ 30 vdc off (logic 0): 0 ~ 2 vdc response time 1us (from trigger input to trigger output) input filter programmable de-bounce filter isolated encoder input channels 1 ch 16-bit incremental quadrature encoder input (a/b/z) type differential, single-ended counter mode x4 frequency input max. 1mhz isolated trigger output channels 4 or 8 ch output voltage 12 vdc output impedance 1k response time 1us (from trigger input to trigger output) configuration derived from 4ch trigger input or encoder input. can set the pulse delay time and duration time trigger output channel 4,5,6,7 can only be selected either for trigger output or for led lighting control auto measurement timer that measures response interval between trigger input and trigger output interrupt sources two interrupt sources from di, trigger input, encoder z phase and encoder check pointer led lighting control channels 4 ch output voltage 24 vdc, max. 0.5a per channel output current each channel can be set 100ma/250ma/350ma/500ma output by jumper, support dimming control mode trigger mode external power supply connector 6-pin atx 2x3 connector for connection to 12v external power supply when led power consumption exceeds 24v @500ma connector 4ch led lighting control via a 8 pin terminal connector general specifications bus type pci express x1 i/o connector d-sub 44-pin female connector isolation voltage 1000vdc power requirements 50ma @ +3.3v (max.) 220ma @ +12v (max.) note: excluding the power consumption of 24v leds dimensions 168 x 107 mm board id yes, 4-bit operating temperature 0c ~ +60c (32f ~ +140f) with air flow storage temperature -20c ~ +80c (-4f ~ +176f) operating humidity 5 ~ 95% rh, non-condensing os & software support os windows? 7 / windows? 10 (32/64bit) software compatibility c#, c/c++, visual basic side view led lighting control 2 3 5 4 1 add-on-card & peripheral www.axiomtek.com ? 2018 axiomtek co., ltd. all rights reserved. * all specifications and photos are subject to change without notice.
|
