advance specification data sheets describe products that are being considered by wolfspeed for development and market intro - duction. the target performance shown in advance specifcations is not fnal and should not be used for any design activity. please contact wolfspeed about the fu - ture availability of these products. 4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 02, 2018-05-01 all published data at t case = 25c unless otherwise indicated esd: electrostatic discharge sensitive deviceobserve handling precautions! advance PTGA090304MD PTGA090304MD package pg-hb1dso-14-1 wideband ldmos two-stage integrated power amplifer 2 x 15 w, 48 v, 575 C 960 mhz features ? on-chip matching for broadband operation ? designed for ultra wideband performance ? integrated temperature compensation ? integrated esd protection ? pb-free and rohs compliant description the PTGA090304MD is a wideband, two-stage, ldmos integrated power amplifer. fabricated with wolfspeed's 50 v ldmos process, it incorporates internal matching for operation from 575 mhz to 960 mhz, and dual independent outputs of 15 w each. it is available in a 14-lead plastic overmold package with gull wing leads. target rf characteristics single-carrier wcdma specifcations (tested in wolfspeed class ab test fxture, combined outputs) v dd = 50 v, i dq1(a+b) = 34 ma, i dq2(a+b) = 144 ma, p out = 36 dbm avg, ? = 960 mhz, 3gpp wcdma signal, channel bandwidth = 3.84 mhz, peak/average = 10 db @ 0.01% ccdf characteristic symbol min typ max unit gain g ps 33 db drain effciency h d 19 % adjacent channel power ratio acpr C46 dbc
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 02, 2018-05-01 2 a dvance PTGA090304MD typical performance, 920 C 960 mhz (tested in wolfspeed narrowband test fixture) v dd = 50 v, i dq1(a+b) = 34 ma, i dq2(a+b) = 144 ma, p out = 36 dbm avg, 3gpp wcdma signal, channel bandwidth = 3.84 mhz, peak/average = 10 db @ 0.01% ccdf frequency (mhz) gain (db) pae (%) acpr (dbc) 920 33.4 19.6 C46.4 940 33.3 19.3 C46.3 960 33.2 19.1 C46.0 typical broadband performance, 575 C 960 mhz (tested in wolfspeed broadband test fixture) v dd = 50 v, i dq1(a+b) = 34 ma, i dq2(a+b) = 144 ma, p out = 36 dbm avg, 3gpp wcdma signal, channel bandwidth = 3.84 mhz, peak/average = 10 db @ 0.01% ccdf frequency (mhz) gain (db) eff (%) par (db) acpr (dbc) 575 28.5 18.0 9.2 C38.3 590 29.6 18.1 9.2 C40.5 660 31.9 18.4 9.3 C46.2 746 30.8 17.3 9.4 C47.0 860 30.1 16.0 9.4 C46.2 960 30.2 15.1 9.2 C45.1 dc characteristics stage 1 conditions symbol min typ max unit drain leakage current v ds = 48 v, v gs = 0 v i dss 1 a v ds = 105 v, v gs = 0 v i dss 10 a gate leakage current v gs = 10 v, v ds = 0 v i gss 1 a on-state resistance (main) v gs = 10 v, v ds = 0.1 v r ds(on) tbd w (peak) v gs = 10 v, v ds = 0.1 v r ds(on) tbd w operating gate voltage (main) v ds = 48 v, i dq1 = 34 ma v gs1 5.62 v
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 02, 2018-05-01 3 a dvance PTGA090304MD dc characteristics (cont.) stage 2 conditions symbol min typ max unit drain-source breakdown voltage v gs = 0 v, i ds = 10 ma v( br)dss 105 v drain leakage current v ds = 48 v, v gs = 0 v i dss 1 a v ds = 105 v, v gs = 0 v i dss 10 a gate leakage current v gs = 10 v, v ds = 0 v i gss 1 a on-state resistance (main) v gs = 10 v, v ds = 0.1 v r ds(on) tbd w (peak) v gs = 10 v, v ds = 0.1 v r ds(on) tbd w operating gate voltage (main) v ds = 48 v, i dq2 = 144 ma v gs2 5.54 v maximum ratings parameter symbol value unit drain-source voltage v dss 105 v gate-source voltage v gs C6 to +12 v operating voltage v dd 0 to +55 v junction temperature t j 225 c storage temperature range t stg C65 to +150 c thermal characteristics parameter symbol value unit thermal resistance stage 1 (t case = 70c ) r qjc tbd c/w stage 2 (t case = 70c ) r qjc tbd c/w moisture sensitivity level level test standard package temperature unit 3 ipc/jede c j-std-020 260 c ordering information type and version order code package shipping PTGA090304MD v1 r5 tbd pg-hb1dso-14-1 tape & reel, 500 pcs
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 02, 2018-05-01 4 a dvance PTGA090304MD pinout diagram (top view) source: plated copper heat slug on backside of package vd2/ rfout b vd1 a vg2 a vg1 a rfin a n/c n/c n/c n/c rfin b vg1 b vg2 b vd1b vd2/ rfout a 1 2 3 4 5 6 7 8 9 10 11 12 14 13 p t g a 0 9 0 3 0 4 m d _ p d _ 0 2 - 0 2 - 2 0 1 8 lead connections for PTGA090304MD evaluation boards order code frequency description ltn/PTGA090304MD e1 920 C 960 mhz class ab with combined outputs, r04350 ltn/PTGA090304MD e2 728 C 768 mhz class ab with combined outputs, r04350 ltn/PTGA090304MD e3 575 C 960 mhz class ab with combined outputs, r04350
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 02, 2018-05-01 5 a dvance PTGA090304MD package outline specifications package pg-hb1dso-14-1 (top view) 4x 1. 02 9. 02 0.52 x 45 2x 5 . 30 7. 65 2.35 3.83 2x 2. 02 2x 0 . 35 1 . 50 2x 3. 25 11 x 1.00 13.06 4 . 00 2.62 0. 10 max. 1.27 1. 86 z y 12 x 0. 35 1 14.94 0.15 4 x 7 2 x 10 19. 44 1 viewy pg - hb1dso - 14 l_ 01 _ 11 - 06 - 2015 z (5:1) r 0.20 1.00 1.02 2 2 3 . 00 0. 05 2x 0. 50 6 . 91 3 . 45 16 . 26 18 . 44 0 .25 0 . 25 5 3 stand off 0...0. 1 0 min . diagram notesCunless otherwise specifed: 1. mold/dam bar/metal protusion of 0.30mm max per side not included. 2. metal protrusion are connected to source and shall not exceed 0.10mm max. 3. fillets and radii: all radii are 0.3 mm max. 4.interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max. diagram notesunless otherwise specifed: 1. mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. fillets and radii: all radii are 0.30 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6 all tolerances 0.1 mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron max. pg-hb1dso-14-1_01_01-16-2017
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 02, 2018-05-01 6 a dvance PTGA090304MD package outline specifications (cont.) package pg-hb1dso-14-1 (bottom view) 4x 1. 02 9. 02 0.52 x 45 2x 5 . 30 7. 65 2.35 3.83 2x 2. 02 2x 0 . 35 1 . 50 2x 3. 25 11 x 1.00 13.06 4 . 00 2.62 0. 10 max. 1.27 1. 86 z y 12 x 0. 35 1 14.94 0.15 4 x 7 2 x 10 19. 44 1 viewy pg - hb1dso - 14 l_ 01 _ 11 - 06 - 2015 z (5:1) r 0.20 1.00 1.02 2 2 3 . 00 0. 05 2x 0. 50 6 . 91 3 . 45 16 . 26 18 . 44 0 .25 0 . 25 5 3 stand off 0...0. 1 0 min . diagram notesCunless otherwise specifed: 1. mold/dam bar/metal protusion of 0.30mm max per side not included. 2. metal protrusion are connected to source and shall not exceed 0.10mm max. 3. fillets and radii: all radii are 0.3 mm max. 4.interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max. diagram notesunless otherwise specifed: 1. mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. fillets and radii: all radii are 0.30 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6 all tolerances 0.1 mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron max. pg-hb1dso-14-1_01_01-16-2017
|
