page 1 of 2 the big deal ? high power handling, 5w as a splitter ? high ip2 (+80 db) and ip3 (+60 db) at 1w input ? low insertion loss, 0.5 db ? low unbalance, 0.1 db / 1 ? good isolation, 22 db product overview mini-circuits SYPS-2-22HP+ is a surface-mount 2-way 0? splitter/combiner covering the 2 to 200 mhz frequency range, supporting bandwidth requirements for a wide range of rf/microwave systems. this model can handle up to 5w rf input power as a splitter and provides low insertion loss, high isolation, low amplitude unbalance, and low phase unbalance. the unit comes housed in a miniature, shielded, 8-lead package (0.38 x 0.50 x 0.25) with wrap-around terminations for excellent solderability. key features feature advantages high power handling, 5w supports a wide range of power requirements in a miniature package, minimizing space requirements. high ip2, +80 dbm high ip3, +60 dbm minimizes second harmonic and third order intermodulation where multiple carriers may be present. low insertion loss, 0.5 db (above 3 db theoretical loss) the combination of 5w power handling and low insertion loss makes this model a suit - able candidate for distributing signals while maintaining excellent transmission of signal power. high isolation, 22 db minimizes interference between ports. low unbalance, 0.1 db / 1 low unbalance provides nearly equal output signals, ideal for parallel path/multichan - nel systems. small size, 0.38 x 0.50 x 0.25 saves space in dense pcb layouts. SYPS-2-22HP+ power splitter/combiner 2 way-0 50 ? 2 to 200 mhz 5 watt surface mount case style: ah202-1 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
page 2 of 2 maximum ratings pin connections sum port 8 port 1 5 port 2 4 ground 1,2,3,6,7 operating temperature -40c to 85c storage temperature -55c to 100c power input (as a splitter) 5w max. internal dissipation 0.25w max. SYPS-2-22HP+ 2 way-0 50 ? 2 to 200 mhz 5 watt power splitter/combiner rev. or m160987 SYPS-2-22HP+ ed-16111703 wp/cp/am 170608 surface mount features ? high ip2, +80 dbm typ., ip3, +60 dbm at 1watt input ? low amplitude unbalance, 0.1 db typ. ? low phase unbalance, 1.0 deg. typ. ? low insertion loss, 0.5 db typ. applications ? vhf/uhf ? cellular, gps, pcs ? communication systems ? instrumentation case style: ah202-1 electrical schematic outline drawing outline dimensions ( ) inch mm permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 3db splitter theoretical loss. electrical specifcations at 25c parameter frequency (mhz) min. typ. max. unit frequency 2 200 mhz insertion loss (above theoretical 3.0 db) 5-150 0.4 0.6 db 2-200 0.6 0.9 isolation 2-200 18 22 db phase unbalance 5-150 0.1 1.5 degree 2-200 1.5 4 amplitude unbalance 2-200 0.1 0.25 db vswr (port s) 5-150 2-200 1.15 1.25 1.35 1.45 :1 vswr (port 1-2) 5-150 2-200 1.00 1.20 1.25 1.40 :1 a bcd e fg .38 .50 .25 .020 .115 .070 .035 9.65 12.70 6.35 0.51 2.92 1.78 0.89 h j k l m n wt .050 .090 .040 .105 .140 .095 grams 1.27 2.29 1.02 2.67 3.56 2.41 0.80 pcb l an d p atte r n sugges t ed l a y o ut, t o l e r a nce t o b e w i t hi n . 002 demo board mcl p/n: tb-427+ suggested pcb layout (pl-274) frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbalance (deg.) vswr s vswr 1 vswr 2 s-1 s-2 2 3.11 3.05 0.06 27.13 1.91 1.16 1.31 1.23 3 3.08 3.05 0.03 31.11 1.29 1.11 1.20 1.15 5 3.08 3.06 0.02 37.15 0.78 1.08 1.12 1.09 7 3.08 3.07 0.01 43.15 0.56 1.07 1.09 1.07 10 3.10 3.08 0.01 55.69 0.37 1.07 1.06 1.05 20 3.13 3.12 0.01 38.59 0.14 1.07 1.04 1.03 30 3.16 3.15 0.01 33.95 0.06 1.09 1.03 1.03 40 3.20 3.18 0.02 31.44 0.01 1.10 1.03 1.03 60 3.25 3.22 0.02 28.39 0.02 1.14 1.04 1.03 80 3.29 3.27 0.02 26.45 0.03 1.17 1.04 1.04 100 3.33 3.31 0.02 25.12 0.04 1.20 1.04 1.03 120 3.38 3.35 0.03 24.00 0.02 1.22 1.03 1.03 150 3.44 3.41 0.04 22.79 0.14 1.26 1.02 1.02 170 3.50 3.46 0.04 21.84 0.28 1.29 1.02 1.03 200 3.63 3.56 0.07 20.03 0.60 1.37 1.05 1.08 typical performance data a vailable tape and reel at no extra cost reel size devices/reel 13? 200 3.0 3.2 3.4 3.6 3.8 0 40 80 120 160 200 total loss (db) frequency (mhz) syps -2 -22hp+ total loss s-1 (db) s-2 (db) 0 20 40 60 80 0 40 80 120 160 200 isolation (db) frequency (mhz) syps -2 - 22hp+ isolation 1.0 1.1 1.2 1.3 1.4 0 40 80 120 160 200 vswr frequency (mhz) syps-2 -22hp+ vswr #s-vswr #1-vswr #2-vswr notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
