View B39781B8620P810_8914455.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer lte band 13 series/type: ordering code: b8620 B39781B8620P810 date: version: january 16, 2014 2.1 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 january 16, 2014 b8620 782.0 / 751.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephone lte band 13 system n low insertion attenuation n low amplitude ripple n 50 w single-ended both in antenna-rx and tx-antenna paths features n package size 1.8 x 1.4 mm 2 n max. package height 0.475 mm n rohs compatible n approx. weight 0.0042g n package for s urface m ount t echnology ( smt ) n ni, au-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitivity l evel 3 bottom view top view side view 0.3 4 0.35 0.25 0.25 8 4 8 1.4 1.8 1 2 3 6 5 7 5 6 1 2 3 7 0.475 max. 0.7 pin configuration n 3 tx input n 1 rx output n 6 antenna n 2, 4, 5, 7,8 to be grounded 2,4,5 1 3 6 7,8
3 january 16, 2014 b8620 782.0 / 751.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +90 ?c antenna terminating impedance: z ant = 50 w || 15 nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characteristics tx-antenna min. typ. @ 25 ?c max. center frequency f c 782.0 mhz maximum insertion attenuation a 777.0 ... 787.0 mhz 1.7 2.3 db amplitude ripple (p-p) da 777.0 ... 787.0 mhz 0.5 1.1 db amplitude ripple over any 5 mhz da ch channel 777.0 ... 787.0 mhz 0.6 1.0 db error vector magnitude @f carrier 779.4 ... 784.6 mhz evm 1) 1.8 4.0 % @f carrier 779.4 ... 784.6 mhz evm 2) 1.8 3.0 % tx port vswr 777.0 ... 787.0 mhz 1.3 2.0 ant port vswr 777.0 ... 787.0 mhz 1.3 2.0 attenuation a 10.0 ... 716.0 mhz 30 42 db 716.0 ... 728.0 mhz 40 45 db 728.0 ... 746.0 mhz 40 48 db 746.0 ... 756.0 mhz 50 59 db 758.0 ... 767.5 mhz 33 43 db 767.5 ... 768.0 mhz 26 43 db 768.0 ... 769.0 mhz 14 46 db 769.0 ... 770.0 mhz 6 39 db 770.0 ... 771.0 mhz 3 27 db 771.0 ... 772.0 mhz 2 15 db 799.0 ... 805.0 mhz 8 11 db 869.0 ... 894.0 mhz 30 43 db 1554.0 ... 1565.0 mhz 45 51 db 1565.0 ... 1585.0 mhz 45 51 db 1597.0 ... 1607.0 mhz 45 52 db 1805.0 ... 1880.0 mhz 45 55 db 1930.0 ... 1990.0 mhz 45 57 db
4 january 16, 2014 b8620 782.0 / 751.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet 2111.0 ... 2170.0 mhz 45 58 db 2331.0 ... 2361.0 mhz 40 58 db 2400.0 ... 2484.0 mhz 40 57 db 3108.0 ... 3148.0 mhz 30 43 db 4900.0 ... 5850.0 mhz 9 11 db 1) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 2) t = +25 ?c characteristics tx-antenna min. typ. @ 25 ?c max.
5 january 16, 2014 b8620 782.0 / 751.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +90 ?c antenna terminating impedance: z ant = 50 w || 15 nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characteristics antenna-rx min. typ. @ 25 ?c max. center frequency f c 751.0 mhz maximum insertion attenuation a 746.0 ... 756.0 mhz 1.5 2.0 db amplitude ripple (p-p) da 746.0 ... 756.0 mhz 0.3 0.8 db ant port vswr 746.0 ... 756.0 mhz 1.4 2.0 rx port vswr 746.0 ... 756.0 mhz 1.4 2.0 attenuation a 10.0 ... 686.0 mhz 40 53 db 31.0 mhz 50 96 db 686.0 ... 728.0 mhz 27 42 db 771.0 ... 772.0 mhz 27 42 db 777.0 ... 787.0 mhz 50 60 db 787.0 ... 1710.0 mhz 40 45 db 1710.0 ... 1755.0 mhz 40 51 db 1850.0 ... 1910.0 mhz 40 49 db 2238.0 ... 2268.0 mhz 37 44 db 2400.0 ... 2500.0 mhz 40 47 db 4900.0 ... 5950.0 mhz 33 37 db imd product level limits 1) at f tx =782.0 mhz, f rx = 751.0 mhz 1) imd product level limits for power levels p tx =21.5 dbm (antenna port output power) and p blocker =-15dbm (antenna port input power) blocker 1 31.0 mhz -136 -106 dbm blocker 2 813.0 mhz -117 -102 dbm blocker 3 1533.0 mhz -120 -106 dbm blocker 4 2315.0 mhz -129 -109 dbm
6 january 16, 2014 b8620 782.0 / 751.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C30 ?c to +90 ?c antenna terminating impedance: z ant = 50 w || 15 nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w maximum ratings characteristics tx-rx min. typ. @ 25 ?c max. isolation a 746.5 ... 749.0 mhz 55 57 db 749.0 ... 752.0 mhz 55 58 db 752.0 ... 755.5 mhz 57 59 db 777.0 ... 787.0 mhz 60 63 db 1552.0 ... 1574.0 mhz 30 59 db 2328.0 ... 2361.0 mhz 30 54 db 3104.0 ... 3148.0 mhz 30 52 db storage temperature range t stg C40/+85 ?c dc voltage v dc 5 1) 1) 168h damp heat steady state acc. to iec 60068-2-67 cy v esd voltage v esd 100 2) 2) acc. to jesd22-a115b (mm - machine model), 10 negative and 10 positive pulses. v machine model input power p in source and load impedance 50 w 777.0 ... 787.0 mhz elsewhere 28.5 10 dbm dbm continuous wave t = 50?c, 5000 h }
7 january 16, 2014 b8620 782.0 / 751.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant frequency response ant-rx
8 january 16, 2014 b8620 782.0 / 751.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-ant frequency response tx-ant (wideband)
9 january 16, 2014 b8620 782.0 / 751.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response rx-ant frequency response rx-ant (wideband)
10 january 16, 2014 b8620 782.0 / 751.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-rx frequency response tx-rx (wideband)
11 january 16, 2014 b8620 782.0 / 751.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. return loss s 11 tx- port s 22 ant-port s 33 rx-port
12 january 16, 2014 b8620 782.0 / 751.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet references type b8620 ordering code B39781B8620P810 marking and package c61157-a8-a98 packaging f61074-v8259-z000 date codes l_1126 s-parameters b8620_nb_un.s3p, b8620_wb_un.s3p see file header for port/pin assignment table soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
13 january 16, 2014 b8620 782.0 / 751.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39781B8620P810

	To Download B39781B8620P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .