MAX98096 audio hub with wideband flexsound processor simplified block diagram 19-6376; rev 1; 1/13 ordering information appears at end of data sheet. for related parts and recommended products to use with this part, refer to www.maximintegrated.com/MAX98096.related . general description the MAX98096 is a full-featured high performance audio hub with low power consumption and advanced signal processing, making it ideal for a wide range of portable applications. three differential analog microphone inputs and four 1-bit digital microphone inputs accept audio from main, acces - sory, and background microphones. analog line inputs accept four single-ended or two differential audio signals. three digital audio interfaces supports standard pcm formats such as i 2 s, left justified, and tdm. three integrated sample rate converters and highly configur - able signal routing enable a wide range of use cases. the flexsound k audio processor provides low-power advanced signal processing, including equalization, dynamic range compression, speaker protection, micro - phone noise suppression during wideband calls, acous - tic echo cancellation, and ambient aware outputs.integrated amplifiers can output signals from three dacs or any of the analog inputs. amplifiers include a differen - tial receiver amplifier, a stereo class d speaker amplifier, a stereo class h headphone amplifier, and four single- ended line outputs. the 117-bump wlp (6.9mm x 4.7mm x 0.5mm pitch) package is fully specified over the -40 n c to +85 n c extend - ed temperature range. benefits and features s 101db dr stereo dac (8khz < f s < 96khz) s 90db dr stereo adc (8khz < f s < 96khz) s 5.9mw playback power consumption s 40kb local data ram, 56kb local instruction rom s 3 stereo single-ended/differential analog microphone inputs (or 1 analog/2 stereo pdm digital microphone inputs) s 2 stereo single-ended/mono differential line inputs s three i 2 s/pcm/tdm digital audio interfaces s flexsound technology signal processing ? enhanced speakerphone ? single/dual microphone wideband noise suppression (16khz sampling rate) ? ambient aware receiver output ? acoustic echo cancellation s stereo low emi class d amplifiers ? 3.2w per channel (4 i , v pvdd_ = 5.0v) ? 1.2w per channel (8 i , v pvdd_ = 4.2v) s stereo directdrive ? headphone amplifiers ? jack detection and identification s differential receiver amplifier/stereo line output s asynchronous digital mixing and sample rate conversion flexsound is a trademark and directdrive is a registered trademark of maxim integrated products, inc. evaluation kit available MAX98096 digital or analoganalog or mic input stereo adc stereo adc mono dac control digital audio interface digital audio interface digital audio interface 1.8v 1.2v battery i 2 c/spi i 2 s/pc mi 2 s/pc mi 2 s/pcm flexsound dsp mic input line input line output earpiece amplifier class h amplifier charge pump power supply class d amplifier class d amplifier analog ? 5-band parametric eq ? compressor /e xpander ? asynchronous digital mixing ? sample rate conversion ? microphone noise suppression ? acoustic echo cancellation ? speaker protection ? ambient aware output s digital mic input jack detection or for pricing, delivery, and ordering information, please contact maxim direct at 1-888-629-4642, or visit maxim?s website at www.maximintegrated.com. abridged data sheet downloaded from: http:///
|
