a b c d 4 3 2 1 d c b a 1 2 4 3 sma male cable end crimp for rg178 cable 0.254 (6.50) 0.177 (4.50) recommended cable stripping dimensions 0.118 (3.00) rg-178 cable 1. strip the cable to the recommended dimensions. 2. solder the support onto the braid. 3. place the spacer onto the center conductor. 4. solder or crimp the pin onto the center conductor. 5. insert the pin, center conductor, spacer, and support into the body until the top of the pin is even with the body. 6. crimp the tail of the body onto the support with a hex crimp tool. CONSMA007-R178 assembly instructions description material finish body pin insulation nickel teflon gold teflon brass be cu washer ph bronze gold gasket rubber si rubber crimp ring nickel brass connector city 159 ort lane merlin, or 97532 ph (541)-471-6256 fax (541)-471-6251 date: sheet 1 of 1 revision: title part no. dimensions: CONSMA007-R178 1.0 inches (mm) 6/2/2006 0.197 (5.00) 0.577 (14.65) ?0.102 (2.60) 1/4-36unf-2b threads h0.311 (7.90) spacer teflon teflon support gold brass spacer support 0.335 (8.50) ?0.049 (1.25) 0.102 (2.60) ?0.035 (0.90) ?0.024 (0.60) side view pin
|