www.sumida.com network isolation transformer hit - 100 note: this specification is subject to change without notice. please contact your nearest sales office for updated informatio n when placing an order. page 1 of 2 ver .1.0 ( march 2015) outline ? rohs compliance ? operating temperature ? humidity 10 40 30 85 no dew condensation ? storage temperature ? humidity - 20 65 10 95 no dew condensation ? 100base - tx compatible ? us patent no. 6974905 ? iec60601 - 1 recognized application n etwork separation device hit - 100 (hyper isolation transformer) , in a network environment, such as medical facilities, is a high - performance isolation transformer in order to prevent electric shocks to the operator and patients that are connected to the electronic medical equipment. this product (adapted separator safety general rules iec60601 - 1 - 1 medical electrical equipment) interrupts the electric current by the potential difference to occur between a leak electric current and the grounds from other electric apparatuses by separating the transmission signal with a medical service electric apparatus and other electric apparatuses electrically . in addition, it is possible to reduce the common mode noise generated in the lan cable, and this noise can prevent malfunction or failure of the electrical equipment by the cause. ? used equipment : pc hub ruter and communication equipment dimensions ( unit : mm)
www.sumida.com network isolation transformer hit - 100 note: this specification is subject to change without notice. please contact your nearest sales office for updated informatio n when placing an order. page 2 of 2 ver .1.0 ( march 2015) electric characteristic impedance 100 100 rj - 45 input voltage 3v rms max frequency response 100khz - 100mhz max 1db return loss 1mhz - 100mhz min. 20db dielectric strength in - out ac 4kv(1minut) in - out c apacitance max. 40pf c reepage d istance min. 8mm c learance min. 5mm e xample for sales office information, please click here to visit our website.
|