specification ps-65-3.3 ps-65-5 ps-65-7.5 ps-65-12 ps-65-13.5 ps-65-15 ps-65-24 ps-65-27 ps-65-48 model dc voltage rated current current range rated power output voltage adj. range line regulation load regulation setup, rise time hold up time (typ.) voltage range frequency range efficiency(typ.) input inrush current (typ.) leakage current working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing overload ac current (typ.) 3.3v 5v 7.5v 12v 13.5v 15v 24v 27v 48v 12a 12a 8a 5.2a 4.7a 4.2a 2.7a 2.4a 1.35a 0 ~ 15.2a 0 ~ 13.8a 0 ~ 9.6a 0 ~ 6a 0 ~ 5.4a 0 ~ 4.8a 0 ~ 3a 0 ~ 2.7a 0 ~ 1.5a 39.6w 60w 60w 62.4w 63.45w 63w 64.8w 64.8w 64.8w 80mvp-p 100mvp-p 100mvp-p 100mvp-p 100mvp-p 100mvp-p 100m vp-p 100mvp-p 100mvp-p 3.14 ~ 3.63v 4.75 ~ 5.5v 7.13 ~ 8.25v 11.4 ~ 13.2v 12.8 ~ 14.9v 14.25 ~ 16.5v 22.8 ~ 26.4v 25.65 ~ 29.7v 45.6 ~ 52.8v 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 800ms, 20ms at full load 60ms at full load 90 ~ 264vac 127 ~370vdc 47 ~ 440hz 69% 76% 79% 79% 79% 79% 80% 80% 80% 1.2a/115vac 0.72a/230vac cold start 20a/115vac 40a/230vac <0.75ma / 240vac 73 ~ 105w(3.3v : 51 ~ 75w)(5v : 70 ~ 105w) rated output power protection type : hiccup mode, recovers automatically after fault co ndition is removed. protection type : hiccup mode, recovers automatically after fault co ndition is removed. -10 ~ +60 (refer to "derating curve") 20 ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.04%/ (0 ~ 50 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 300.7k hrs min. mil-hdbk-217f (25 ) 127*76*42mm (l*w*h) 0.21kg; 54pcs/14.2kg/1.35cuft 1. all parameters not specially mentioned are measured at 230vac input, r ated load and 25 of ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth by using a 12" twisted pair- wire terminated with a 0.1uf & 47uf parallel capacitor. 3. tolerance : includes set up tolerance, line regulation and load regula tion. 4. the power supply is considered a component which will be installed into a fi nal equipment. the final equipment must be re-confirmed that it still me ets emc directives. 5. mounting holes m1 and m2 should be grounded for emi purposes. 6. heat sink hs1,hs2 can not be shorted. for guidance on how to perform these emc tests, please refer to ?emi testing of c omponent power supplies.? (as available on http://www.meanwell.com) file name:ps-65-spec 2011-08-18 over voltage safety standards ul60950-1, tuv en60950-1 approved compliance to en55022 (cispr22) class b, en61000-3-2,-3 compliance to en61000-4-2,3,4,5,6,8,11, en55024, light indust ry level, criteria a 65w single output switching power supply p s - 6 5 s e r i e s features : withstand voltage isolation resistance i/p-o/p:3kvac i/p-fg:1.5kvac o/p-fg:0.5kvac i/p-o/p, i/p-fg, o/p-fg:100m ohms / 500vdc / 25 / 70% rh ripple & noise (max.) note.2 voltage tolerance note.3 environment safety & emc (note 4) protection universal ac input/full range low leakage current<0.5ma protections: short circuit / overload / over voltage cooling by free air convection 100% full load burn-in test fixed switching frequency at 65khz 2 years warranty rated output power for convection; 72w (+3.3v : 50w;+5v:69w) with 18 cfm mi n. forced air output power (max.) 3.8 ~ 4.46v 5.75 ~ 6.75v 8.63 ~ 10.1v 13.8 ~ 16.2v 15.5 ~ 18.2v 17.25 ~ 20.25v 27.6 ~ 32.4v 31 ~ 36.45v 55.2 ~ 64.8v emc immunity emc emission
file name:ps-65-spec 2011-08-18 unit:mm fosc : 65khz dc output connector (cn2) : molex 5273-06 or equivalent pin no. 1,2,3 4,5,6 assignment +v -v mating housing molex 5195 or equivalent terminal molex 5194 or equivalent ac input connector (cn1) : molex 5277-02 or equivalent pin no. 12 assignment mating housing molex 5195 molex 5194 or equivalent or equivalent terminal load (%) block diagram mechanical specification ambient temperature ( ) (horizontal) -10 0 10 20 30 40 50 60 20 40 60 80 100 others 3.3v,5v output derating vs input voltage input voltage (vac) 60hz 90 100 95 120 115 160 140 200 180 240 220 264 load (%) 90 100 80 85 70 60 50 40 derating curve hs1 hs2 hs1,hs2 can not be shorted ac/n ac/l fg 5.6 4- 3.8 42 76 64.8 5.6 2 1 5 6 115.8 127 cn1 cn2 4 3 2 1 m1 m2 fs1 ac fuse f4a/250v -v fg i/p circuit control o.l.p. pwm o.v.p. switching rectifiers filter emi filter & power detection rectifiers filter & +v 65w single output switching power supply p s - 6 5 s e r i e s
|
