panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ DQ-M (adqm) asctb179e 201202-t ordering information types standard packing: carton: 20 pcs.; case: 200 pcs. rating 1. coil data 1) 1 coil latching 60a power latching relays DQ-M relays (adqm) contact arrangement nominal coil voltage part no. 1 coil latching 2 coil latching 1 form a 4.5v dc adqm1604h adqm2604h 6v dc adqm16006 adqm26006 9v dc adqm16009 adqm26009 12v dc adqm16012 adqm26012 24v dc adqm16024 adqm26024 nominal coil voltage set voltage (at 20 c 68 f ) reset voltage (at 20 c 68 f ) nominal operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) nominal operating power max. applied voltage (at 20 c 68 f ) 4.5v dc 80%v or less of nominal voltage (initial) 80%v or less of nominal voltage (initial) 111.1ma 40.5 ? 500mw 130%v of nominal voltage 6v dc 83.3ma 72 ? 9v dc 55.6ma 162 ? 12v dc 41.7ma 288 ? 24v dc 20.8ma 1,152 ? rohs compliant features 1. miniature and high capacity miniature relay capable of high 60 a capacity control. size: 29.0(l) 38.0(w) 17.3(h) mm 1.142(l) 1.496(w) .681(h) inch nominal switching capacity: 60a 250v ac 2. latching type latching type contributes to device energy ef?iency. nominal operating power ?500mw (1 coil latching) ?1w (2 coil latching) 3. high insulation between contact and coil breakdown voltage: 4,000 v ac surge breakdown voltage: 10,000 v 4. cd-free, pb-free 5. flux-resistant type typical applications 1. remote control of electric power meters 2. time switches DQ-M relays operating function 1: 1 coil latching (1 form a) 2: 2 coil latching (1 form a) nominal coil voltage (dc) 4h: 4.5 v, 06: 6 v, 09: 9 v, 12: 12 v, 24: 24 v adqm 6 0 contact capacity 6: 60 a terminal shape nil: m4 securing screw contact characteristics 0: standard contact
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ DQ-M (adqm) asctb179e 201202-t 2) 2 coil latching 2. speci?ations notes: *1. this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. wave is standard shock voltage of 1.2 50 s according to jec-212-1981 *3. the upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. refer to usage, transport and storage conditions in notes. dimensions (mm inch ) nominal coil voltage set voltage (at 20 c 68 f ) reset voltage (at 20 c 68 f ) nominal operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) nominal operating power max. applied voltage (at 20 c 68 f ) 4.5v dc 80%v or less of nominal voltage (initial) 80%v or less of nominal voltage (initial) 221.7ma 20.3 ? 1,000mw 130%v of nominal voltage 6v dc 166.7ma 36 ? 9v dc 111.1ma 81 ? 12v dc 83.3ma 144 ? 24v dc 41.7ma 576 ? characteristics item speci?ations contact arrangement 1 form a contact resistance (initial) max. 30 m ? (by voltage drop 6 v dc 1a) contact material ag alloy (cadmium free) rating nominal switching capacity (resistive load) 60 a 250v ac max. switching power (resistive load) 15,000 v a max. switching voltage 250v ac max. switching current 60 a nominal operating power 500mw (1 coil latching), 1,000mw (2 coil latching) min. switching capacity (reference value)* 1 100ma 5 v dc electrical characteristics insulation resistance (initial) min. 1,000m ? (at 500v dc) measurement at same location as ?reakdown voltage section. breakdown voltage (initial) between open contacts 1,500 vrms for 1min. (detection current: 10ma.) between contact and coil 4,000 vrms for 1min. (detection current: 10ma.) surge breakdown voltage* 2 (initial) between contact and coil min. 10,000 v temperature rise (coil) (at 20 c 68 f ) max. 50 c (by resistive method, max. switching current) (coil; de-energized) set time (at 20 c 68 f ) max. 20 ms (nominal voltage applied to the coil, excluding contact bounce time.) reset time (at 20 c 68 f ) max. 20 ms (nominal voltage applied to the coil, excluding contact bounce time.) mechanical characteristics shock resistance functional min. 200 m/s 2 (half-wave pulse of sine wave: 11 ms; detection time: 10 s.) destructive min. 1,000 m/s 2 (half-wave pulse of sine wave: 6 ms.) vibration resistance functional 10 to 55 hz at double amplitude of 1.5 mm (detection time: 10 s.) destructive 10 to 55 hz at double amplitude of 2.0 mm expected life mechanical min. 10 6 (at 180 times/min.) electrical 60a 250v ac min. 10 3 (resistive load, operating frequency: 15s on, 45s off) 50a 250v ac min. 10 4 (resistive load, operating frequency: 15s on, 45s off) conditions conditions for operation, transport and storage* 3 ambient temperature: ?0 c to +70 c ?0 f to +158 f humidity: 5 to 75% r.h. (not freezing and condensing at low temperature) max. operating speed 1 times/min. (at rated load) unit weight approx. 35 g 1.23 oz the cad data of the products with a cad data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ note 1) these are dummy terminals for the strength reinforcement for the m4 screw terminal connection. fix or solder these to the pc board in case setting m4 screw. however, do not use the dummy terminals as wiring to the pc board. in case wiring of the dummy terminals, the conductor destruction may occur due to the high current. note 2) no 3rd terminal on 1 coil latching type. external dimensions note 1) 2 coil latching type only this differs with the part no. 0.8 .031 0.8 .031 7.62 .300 3.6 .142 0.8 .031 0.8 .031 2-4.3 dia. 2-.169 dia. 2-8.7 2-.343 made in japan adqm26012 lot. no. 1.5 .059 (8.9) (.350) (2.0) (.079) 5.08 .200 5.08 .200 1.8 .071 0.4 .016 1.5 .059 0.4 .016 5.8 .228 25.4 1.000 29.5 1.161 40.4 1.591 19.42 .765 20.56 .809 2-9.9 2-.390 29.0 1.142 38.0 1.496 44.0 1.732 34.5 1.358 40.4 1.591 22.86 .700 3.7 .146 17.3 .681 9.25 .364 5.08 .200 0.3 .012 general tolerance: 0.3 .012 pc board pattern (bottom view) tolerance: 0.1 .004 schematic (bottom view) 2 coil latching type only 7.62 .300 3-1.5 dia. 3-.059 dia. 4-2.0 dia. 4-.079 dia. 5.08 .200 17.78 .700 25.4 1.000 5.08 .200 5.08 .200 2 coil latching type1 coil latching type + - -- 1 5 4 2 6 7 6 7 reset coil set coil + 1 5 4 32 cad data
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ DQ-M (adqm) asctb179e 201202-t notes for cautions f or us e . 1. coil operating power pure dc current should be applied to the coil. the wave form should be rectangular. if it includes ripple, the ripple factor should be less than 5%. however, check it with the actual circuit since the characteristics may be slightly different. also, the power waveform should be square and we recommend it be at least 0.1 seconds. please keep continuous power to the coil to within 10 seconds. 2. usage, transport and storage conditions 1) temperature: ?0 to +70 c ?0 to +158 f 2) humidity: 5 to 75% rh (avoid freezing and condensation.) the humidity range varies with the temperature. use within the range indicated in the graph below. 3) atmospheric pressure: 86 to 106 kpa temperature and humidity range for usage, transport, and storage 3. installation of m4 securing screw do not apply excessive pressure on the terminals. this could adversely affect relay performance. secure to the pc board a dummy terminal designed for reinforcement of the terminal and use a washer in order to prevent deformation. keep the installation torque to within 1.2 and 1.4 n? (12 to 14 kgf?m). also, use a spring washer to prevent it from loosening. do not use the dummy terminals as wiring to the pc board. in case wiring of the dummy terminals, the conductor destruction may occur due to the high current. 5 75 humidity, %r.h. 070 ?0 +32 +158?0 te mperature, c f (avoid condensation when used at temperatures higher than 0 c (avoid freezing when used at temperatures lower than 0 c 32 f ) 32 f ) tolerance range
|
