wall industries, inc. rev a PSAQF600 series up to 600 watts, ac/dc switching power supplies 01/15/2013 wall industries, inc. ? 5 watson brook road, exeter , nh 03833 ? tel: 603-778-2300 ? toll free: 888-597 -9255 ? fax 603-778-9797 website: www.wallindustries.com ? e-mail: sales@wal lindustries.com page 1 of 5 features rohs compliant 600 watts output power high power density single outputs pfc function, pf > 0.95 90~93% high efficiency built-in fan remote on/off control current sharing function power good function universal input voltage range: 90-264vac (120-370vd c) short circuit, over load, over voltage, and over temperature protection ce and ul/cul 60950-1 approvals description size: 9.0 x 4.13 x 1.72 inches 228.5 x 105.0 x 44.0 mm the PSAQF600 series of ac/dc switching power suppli es provides up to 600 watts of output power in a 9.0 x 4.13 x 1.72 enclosed package. t his series consists of single output models with a universal input voltage range of 90-264vac ( 120-370vdc). some features include 90~93% high efficiency, power factor > 0.95, remote on/off control, and current sharing and power good functions. all supplies are short circui t, over load, over voltage, and over temperature protected. the PSAQF600 series is rohs compliant and has ul/cul 60950-1 safety approvals. model selection table output current (convection) model number input voltage range output voltage min (1) max output power (convection) efficiency maximum capacitive load PSAQF600-12s 12 vdc 450ma 45a 540w 90% 90,000f PSAQF600-24s 24 vdc 250ma 25a 600w 92% 70,000f PSAQF600-48s 48 vdc 125ma 12.5a 600w 92% 30,000f PSAQF600-54s 90~264 vac or 120~370 vdc 54 vdc 111ma 11.1a 600w 93% 20,000f notes 1. the PSAQF600 series requires a minimum load on t he output to maintain all specified regulations. ope ration under no-load conditions will not damage these devices; however they may not meet al l listed specifications. derating 0 20 40 60 80 100 120 -25 0 20 40 50 60 70 80 100 load (%) ambient temperature (c) 40% 0 20 40 60 80 100 120 90 100 110 135 15 5 230 264 load (%) input voltage (vac)
wall industries, inc. rev a PSAQF600 series up to 600 watts, ac/dc switching power supplies 01/15/2013 wall industries, inc. ? 5 watson brook road, exeter , nh 03833 ? tel: 603-778-2300 ? toll free: 888-597 -9255 ? fax 603-778-9797 website: www.wallindustries.com ? e-mail: sales@wal lindustries.com page 2 of 5 specifications: PSAQF600 series all specifications are based on 25c, nominal input voltage, and maximum output current unless otherwi se noted. we reserve the right to change specifications based on technological advances. specification test conditions min typ max unit input specifications ac input voltage range 90 264 vac input voltage dc input voltage range 120 370 vdc input frequency 47 63 hz at 115vac and full load 8.0 input current at 230vac and full load 3.5 a at 115vac 15 inrush current (<2ms) at 230vac 30 a at 115vac and full load 0.99 power factor at 230vac and full load 0.95 output specifications output voltage see table voltage accuracy -2 +2 % trim -5 +5 % line regulation ll to hl -1 +1 % load regulation 5% to 100% full load -1 +1 % output power see table output current see table minimum load 1 % ripple & noise measured at 20mhz bw with 0.1f and 47f capacitors in parallel 1 % max capacitive load see table hold-up time 15 ms temperature coefficient 0~50c -0.03 +0.03 %/c protection short circuit protection latch off over voltage protection auto-recovery over power protection auto-recovery over temperature protection auto-recovery general specifications efficiency see table switching frequency 90 100 110 khz input to output 3000 input to fg 1500 isolation voltage output to fg 500 vac leakage current at 240vac / 63hz 3.5 ma functions 5v stand-by (18cfm fan) 5vsb: 5v@0.6a; tolerance: 10%; ripple & noise: 100 mvp-p max. turn on 4~6v dc ok signal (power good) turn off 0~1v power on open remote on/off control (+rc/-rc) power off short current sharing cn4: cs, +v, -v are connected in parallel environmental specifications operating temperature with derating (see derating curve) -25 +70 c storage temperature -25 +85 c humidity 95 % rh cooling built-in fan vibration 10~500hz, 2g 10min./1cycle, 60 min. each along x, y , z axes mtbf 25c (mil-hdbk-217f) 100,000 hours physical specifications weight approx. 2.26 lbs (1024g) dimensions (l x w x h) 9.0 x 4.13 x 1.72 inches (228.5 x 105.0 x 44.0 mm) safety & emc safety approvals ul/cul 60950-1, ce emi (conducted and radiated emissions) en 55022 class b, radiated class a emc ems (noise immunity) en 55024
wall industries, inc. rev a PSAQF600 series up to 600 watts, ac/dc switching power supplies 01/15/2013 wall industries, inc. ? 5 watson brook road, exeter , nh 03833 ? tel: 603-778-2300 ? toll free: 888-597 -9255 ? fax 603-778-9797 website: www.wallindustries.com ? e-mail: sales@wal lindustries.com page 3 of 5 mechanical drawing 1.73 (44.0) 4.13 (105.0) 76 5 4 3 2 led 1 a a a a 1.73 (44.0) 0.94 (24.0) 0.51 (13.0) 0.20 (5.0) r6.0 7.48 (190.0) a=m4 b=m3 ?6.0 vo adj 4.13 (105.0) 8.74 (222.0) 9.00 (228.5) a a a a b bb 3.15 (80.0) 0.49 (12.5) 8.74 (222.0) 7.48 (190.0) 0.63 (16.0) 4.11 (104.5) 0.94 (24.0) 0.47 (12.0) 0.51 (13.0) unit: inches (mm) c8 c7 c6 c5 c4 c3 c2 c1 dc out +pg gnd cs +s +5v -aux +v +v +v -v -v -v cn4 notes 1. tolerance: 0.02 (0.5mm) 2. weight: 2.26 lbs (1024g) 3. all dimensions are for reference only +rc gnd -s assembly instructions *u case t = 0.08 (2.0mm) customer screws into the length of the case no higher than 0.02 (0.5mm) (namely screw length for load plate thickness plus 0.1 (2.5mm)) ac input terminal pin 1 ac in dc output terminal pin 2~4 -dc out 5~7 +dc out connector pin (cn4) c1 +s c2 -s c3 cs c4 gnd c5 gnd c6 +rc c7 +pg c8 +5v -aux pin assignment pin assignment pin assignment
wall industries, inc. rev a PSAQF600 series up to 600 watts, ac/dc switching power supplies 01/15/2013 wall industries, inc. ? 5 watson brook road, exeter , nh 03833 ? tel: 603-778-2300 ? toll free: 888-597 -9255 ? fax 603-778-9797 website: www.wallindustries.com ? e-mail: sales@wal lindustries.com page 4 of 5 function description of cn4 pin number function description c1 +s c2 -s c3 cs current share function pins c4 gnd this pin connects to the negative terminal (- v). return for dc-ok signal output. c5 gnd this pin connects to the negative terminal (- v). return for dc-ok signal output. c6 +rc turns the output on and off by electrical or dry contact between pin c4 (-rc), short: power off, open: power on c7 +pg dc-ok signal is a dc output, referenced to p in 6 (dc-ok gnd). c8 +5v-aux stand-by voltage output ground 4.5~5v, r eferenced to pin c4 or c5 (gnd). the maximum load c urrent is 0.6a function manual 1. dc-ok signal c7 c1 c8 c2 between dc-ok (pin c5) and gnd (pin c6) output status 4~6v on 0~1v off +pg gnd cs +s +5v -aux +rc gnd -s c7 c1 c8 c2 2. remote control it can be turned on/off by using the remote contr ol function. between rc+ (pin c3) and rc- (pin c4) output status sw on (short) off sw off (open) on c7 c1 c8 c2 +pg gnd cs +s +5v -aux +rc gnd -s c7 c1 c8 c2 sw 3. current sharing 1. the difference of vout among parallel units sho uld be less than 1%. 2. the power pout should be less than 50%. 3. three units is the maximum when in in parallel operation. 4. the power supplies should be connected in paral lel to the load using short and large diameter wiri ng (twisted is ideal). cs +s -s cs +s -s cs +s -s +pg gnd cs +s +5v -aux +rc gnd -s c7 c1 c8 c2 cn4 + _ load +s (pin c1) -s (pin c2) sense lines should be twisted in pairs
wall industries, inc. rev a PSAQF600 series up to 600 watts, ac/dc switching power supplies 01/15/2013 wall industries, inc. ? 5 watson brook road, exeter , nh 03833 ? tel: 603-778-2300 ? toll free: 888-597 -9255 ? fax 603-778-9797 website: www.wallindustries.com ? e-mail: sales@wal lindustries.com page 5 of 5 block diagram emi filter l n fg bridge rectifier pfc circuit power switching aux power rectifier & filter stand-by fan +5v-aux gnd over voltage protection remote control detection circuit pfc & pwm control o.p.p. o.t.p. o.c.p. o.v.p. +s +v -v -s cs (current share) +pg (dc-ok) +rc (on/off) company information wall industries, inc. has created custom and modifi ed units for over 50 years. our in-house research a nd development engineers will provide a solution that exceeds your performance re quirements on-time and on budget. our iso9001-2008 certification is just one example of our commitment to producing a high quali ty, well-documented product for our customers. our past projects demonstrate our commitment to you , our customer. wall industries, inc. has a reputat ion for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. we will contin ue to provide ongoing support for your project above and beyond the desig n and production phases. give us a call today to d iscuss your future projects. contact wall industries for further information: phone: (603)778-2300 toll free: (888)597-9255 fax: (603)778-9797 e-mail: sales@wallindustries.com web: www.wallindustries.com address: 5 watson brook rd. exeter, nh 03833
|
