View A070VW05-V1_7870457.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

customer approval sheet company name model a070vw05 v1 customer approved title : name : approval for specifications only (spec. ver. 0.2 ) approval for specifications and es sample (spec. ver. 0.2 ) approval for specifications and cs sample (spec. ver. 0.2 ) customer remark : auo pm : p/n : comment : doc. version : 0.2 total pages : 25 date : 2008/11/21 www.datasheet.co.kr datasheet pdf - http://www..net/
all rights strictly reserved. any portion of this pa per shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. product specification 7.0" color tft-lcd module/panel model name a070vw05 v1 planned lifetime: from 2008/sep to 2010/jul phase-out control: from 2010/jan to 2010/jul eol schedule: 2010/jul < >preliminary specification < >final specification note: the content of this specification is subject to change. ? 2008 au optronics all rights reserved, do not copy. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 1/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. record of revision version revise date page content 0.0 2008/09/24 first draft 0.1 2008/11/13 3 4, 5 6 9 10 12 16 19 22 24 update weight and power consumption. update drawing for blu fpc length extension, and la bel position change. correct recommended connector. update vcomin and recommended voltage for gamma 2 .2. update current consumption. update horizontal input timing. update optical spec: contrst ratio, white chromaticity . update vibration spec.. update packing form. update system block example. 0.2 2008/11/21 9 19 correct vgl, vcomin, and gamma voltage setting. update spec image sticking. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 2/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. contents a. general information................................ ................................................... .................................................. 3 b. outline dimension .................................. ................................................... .................................................. 4 1. tft-lcd module C front view..................... ................................................... ............................................ 4 2. tft-lcd module C rear view ...................... ................................................... ........................................... 5 c. electrical specifications .......................... ................................................... ................................................ 6 1. tft lcd panel pin assignment .................... ................................................... .......................................... 6 2. backlight pin assignment .......................... ................................................... ............................................... 7 3. absolute maximum ratings........................ ................................................... .............................................. 8 4. electrical dc characteristics...................... ................................................... .............................................. 9 4. electrical ac characteristics ...................... ................................................... .............................................11 6. power on/off characteristics..................... ................................................... ............................................ 14 d. optical specification .............................. ................................................... ................................................ 16 e. reliability test items ............................. ................................................... ................................................. 19 f. packing and marking ................................ ................................................... .............................................. 22 1. packing form ...................................... ................................................... ................................................... 22 2. module/panel label information .................. ................................................... .......................................... 23 3. carton label information........................ ................................................... ................................................ 23 g. application note ................................... ................................................... .................................................. 2 4 1. system block example .............................. ................................................... ............................................. 24 h. precautions ........................................ ................................................... ................................................... .. 25 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 3/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. a. general information a070vw05 v1 is an a-si type thin film transistor liquid crystal displa y (tft-lcd). this model is composed of a tft-lcd, driver ic, fpc (flexible printed circuit), and a backlight unit. this product is mainly for car after-market, and other suitable application. no. item unit specification remark 1 screen size inch 7.0(diagonal) 2 display resolution dot 800rgb(h)480(v) 3 overall dimension mm 165(h) 104(v) 4.065(t) n ote 1 4 active area mm 152.40(h)91.44(v) 5 pixel pitch mm 0.1905(h)0.1905(v) 6 color configuration -- r. g. b. stripe note 2 7 color depth -- 16.7m colors note 3 8 ntsc ratio % 50 9 display mode -- normally white 10 panel surface treatment -- anti-glare, 3h 11 weight g 127 12 power consumption w 1.8 note 4 13 viewing direction 6 oclock (gray inversion) note 1: not include fpc, protect film, and barcode la bel. refer next page to get further information. note 2: below figure shows dot stripe arrangement. note 3: the full color display depends on 24-bit dat a signal (pin 5~28). note 4: please refer to typical driving condition i n electrical characteristics chapter. . . ( 1 2 3 .2398 2399 2400) (1 ..480) www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 4/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. b. outline dimension 1. tft-lcd module C front view www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 5/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. 2. tft-lcd module C rear view www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 6/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. c. electrical specifications 1. tft lcd panel pin assignment recommended connector: hrs fh28-50s-0.5sh pin no symbol i/o description remark 1 gnd p ground 2 avdd p aanlog power supply voltage 3 vddio p digital power supply voltage 4 grb i global reset 5 dr0 i red data input (lsb) 6 dr1 i red data input 7 dr2 i red data input 8 dr3 i red data input 9 dr4 i red data input 10 dr5 i red data input 11 dr6 i red data input 12 dr7 i red data input (msb) 13 dg0 i green data input (lsb) 14 dg1 i green data input 15 dg2 i green data input 16 dg3 i green data input 17 dg4 i green data input 18 dg5 i green data input 19 dg6 i green data input 20 dg7 i green data input (msb) 21 db0 i blue data input (lsb) 22 db1 i blue data input 23 db2 i blue data input 24 db3 i blue data input 25 db4 i blue data input 26 db5 i blue data input 27 db6 i blue data input 28 db7 i blue data input (msb) 29 dclk i data clock input 30 de i data enable input 31 hsync i horizontal sync input 32 vsync i vertical sync input 33 vddio p digital power supply voltage www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 7/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 34 gnd p ground 35 avdd i analog power supply voltage 36 vcomin i common electrode driving voltage 37 v10 i gamma correction voltage reference 38 v9 i gamma correction voltage reference 39 v8 i gamma correction voltage reference 40 v7 i gamma correction voltage reference 41 v6 i gamma correction voltage reference 42 v5 i gamma correction voltage reference 43 v4 i gamma correction voltage reference 44 v3 i gamma correction voltage reference 45 v2 i gamma correction voltage reference 46 v1 i gamma correction voltage reference 47 vgh p positive power supply voltage for gate driver 48 gvddio p digital power supply voltage for gate driver 49 vgl p negative power supply voltage for gate driver 50 ggnd p ground for gate driver i: input pin; p: power pin; 2. backlight pin assignment recommended connector : hrs fh19sc-10s-0.5sh pin no symbol i/o description remark 1~5 vled+ p backlight led anode 6~10 vled- p backlight led cathode www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 8/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 3. absolute maximum ratings item symbol condition min. max. unit remark vddio gnd=0 -0.5 5.0 v digital power supply voltage avdd gnd=0 -0.5 15 v aanlog power supply voltage gvddio ggnd=0 -0.5 6.0 v digital power supply voltage for gate driver vgh ggnd=0 -0.3 40 v positive power supply voltage for gate driver vgl ggnd=0 -20 0.3 v negative positive power supply voltage for gate driver power voltage vgh-vgl ggnd=0 -0.3 40 v input signal voltage data gnd=0 -0.3 3.6 v digital signals note 1: functional operation should be restricted un der ambient temperature (25 ). note2: maximum ratings are those values beyond which damag es to the device may occur. functional operation should be restricted to the limits in the electrical characteristics chapter. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 9/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 4. electrical dc characteristics a. typical operation condition (gnd = ggnd = 0v) item symbol min. typ. max. unit remark vddio 3.0 3.3 3.6 v digital power supply voltage avdd 10.5 11 11.5 v aanlog power supply voltage gvddio 3.0 3.3 3.6 v digital power supply voltage for gate driver vgh 17.5 18 18.5 v positive power supply voltage for gate driver power voltage vgl -8.5 -8.0 -7.5 v negative positive power supply voltage for gate driver h level vih 0.7xvddio -- vddio v input signal voltage l level vil gnd -- 0.3xvddio v v1 ~ v5 avdd/2 -- avdd-1 v gamma reference voltage v6 ~ v10 1 -- avdd/2 v note1 vcomin vcdc 3.3 3.5 3.7 v note 2 note 1: recommended voltage setting for gamma 2.2 gamma 2.2 avdd 11 00h v1 10 10h v2 8.45 20h v3 7.95 30h v4 7.53 3fh v5 6.7 3fh v6 4.3 30h v7 3.47 20h v8 3.05 10h v9 2.55 00h v10 1 note2: based on recommended gamma 2.2 voltage. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 10/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. b. current consumption (gnd = ggnd = 0v) parameter symbol condition min. typ. max. unit remark input current for vddio ivddio vddio = 3.3v -- 15 20 m a note 1, 2 input current for avdd iavdd avdd = 11v -- 10 20 ma note 1, 2 input current for gvddio igvddio gvddio = 3.3v -- 0.08 0.15 ma note 1, 2 input current for vgh vgh vgh = 18v - 0.35 0.5 ma note 1, 2 input current for vgl vgl vgl = -7v -0.5 -0.35 - ma note 1, 2 note 1:test condition is under typical eletrical dc and ac characteristics. note 2: test pattern is the following picture. c. backlight driving conditions the backlight (led module) is suggested to drive by co nstant volatage/current with typical value. the backlight (led module, note 1) is suggested to dr ive by constant current with typical value. parameter symbol min. typ. max. unit remark led current i l -- 180 225 ma note 1 power consumption v l 8.4 9.9 10.8 v led life time l l 10,000 -- -- hr note 2, 3 note 1: led backlight is nine parallel strings and t hree leds for each string is as below figure. suggest to drive by 180ma for led lightbar. note 2: define led lifetime: brightness is decrea sed to 50% of the initial value. led lifetime is restricted under normal condition, ambient temperatur e = 25 and led lightbar current = 180ma. note 3: if it uses larger led lightbar voltage/ curr ent more than 180ma, it maybe decreases the led lifetime. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 11/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 4. electrical ac characteristics a. signal ac characteristics parameter symbol min. typ. max. unit remark dclk duty cycle -- 40 50 60 % t cw / t dclk x100% vsync setup time t vst 0 -- -- ns vsync hold time t vhd 2 -- -- ns hsync setup time t hst 5 -- -- ns hsync hold time t hhd 10 -- -- ns data enable setup time t dst 4 ns data enable hold time t dhd 2 ns data setup time t dst 5 -- -- ns data hold time t dhd 10 -- -- ns t h : hsync period t dclk : dclk period t cw : the width of dclk high www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 12/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. b. input timing hs r[7:0] g[7:0] b[7:0] r0 g0 b0 r1 g1 b1 r2 g2 b2 r3 g3 b3 t h t hw t hb t hf t he r n-1 g n-1 b n-1 r n g n b n invalid invalid invalid invalid invalid invalid r n g n b n r n-1 g n-1 b n-1 t hbl t hd dclk horizontal input timing. (hv mode) dclk de t h bl t hd r[7:0] g[7:0] b[7:0] r0 g0 b0 r1 g1 b1 r2 g2 b2 r3 g3 b3 r n-1 g n-1 b n-1 r n g n b n invalid invalid invalid invalid invalid invalid r n g n b n r n-1 g n-1 b n-1 horizontal input timing. (de mode) horizontal input timing parameter symbol min. typ. max. unit remark dclk frequency fdclk 25 33 40 mhz dclk period tdclk 25 30.3 40 ns hsync period (=thd+thbl) th -- 1056 1088 dclk active area thd -- 800 -- dclk horizontal blanking thbl -- 256 288 dclk hsync front porch thf -- 40 72 dclk delay from hsync to 1 s t data the -- 216 -- dclk hsync pulse width thw 1 128 136 dclk hsync back porch thb 80 88 215 dclk www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 13/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. vs hs line t vw xn-1 xn x1 x2 x3 xn-1 xn t v t vf t ve t vbl t h t vf invalid t vd vertical timing. (hv mode) de line xn-1 xn x1 x2 x3 xn-1 xn t vbl invalid t vd vertical timing. (de mode) vertical input timing parameter symbol min. typ. max. unit remark vsync period (=tvd+tvbl) tv -- 505 525 th active lines tvd -- 480 -- th vertical blanking (=tvf+tve) tvbl -- 25 45 th vsync front porch tvf -- 1 21 th gd start pulse delay tve -- 24 -- hs vsync pulse width tvw 1 3 16 th hsync/vsync phase shift tvpd 2 320 -- dclk www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 14/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 6. power on/off characteristics panel power and led on/off sequence is as follows. i nterface signals are also shown in the chart. signal s from any system shall be hi-z state or low level wh en vddio is off. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 15/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. power - off power - on www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 16/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. d. optical specification all optical specification is measured under typical co ndition (note 1, 2) item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 -- -- 12 18 20 30 ms ms note 3 contrast ratio cr at optimized viewing angle 400 500 -- note 4 top bottom left viewing angle right c r 1 0 35 55 55 55 45 65 65 65 -- -- -- -- deg. note 5 brightness y l =0 300 375 -- cd/m 2 note 6 x =0 0.275 0.325 0.375 white y =0 0.290 0.340 0.390 x =0 tbd tbd tbd red y =0 tbd tbd tbd x =0 tbd tbd tbd green y =0 tbd tbd tbd x =0 tbd tbd tbd chromaticity blue y =0 tbd tbd tbd uniformity y l % 70 75 -- % note 7 note 1: ambient temperature =25 , and led lightbar voltage vl = 12 v. to be measur ed in the dark room. note 2: to be measured on the center area of panel with a viewing cone of 1 by topcon luminance meter bm-5a, after 15 minutes operation. center of the screen field=1 bm-5a www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 17/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. note 3: definition of response time: the output signals of photo detector are measured w hen the input signals are changed from black to white(falling time) and from white to black(rising time), respectively. the response time is defined as the time interval between the 10% and 90% of amplitudes. refer to figure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% note 4.definition of contrast ratio: contrast ratio is calculated with the following for mula. status black" " at is lcd when output detector photo status white" " at is lcd when output detector photo (cr) ratio contrast = note 5. definition of viewing angle, , refer to figure as below. x' y x y' note 6. measured at the center area of the panel wh en all the input terminals of lcd panel are electrically opened. note 7: luminance uniformity of these 9 points is d efined as below: www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 18/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 19/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. e. reliability test items no. test items conditions remark 1 high temperature storage ta= 8 0 240hrs 2 low temperature storage ta= -3 0 240hrs 3 high ttemperature operation tp= 7 0 240hrs 4 low temperature operation ta= -2 0 240hrs 5 high temperature & high humidity tp= 5 0 . 80% rh 240hrs operation 6 heat shock -2 0 ~ 7 0 , 5 0 c y c l e , 2 h r s / c y c l e non-operation 7 electrostatic discharge contact = 4 kv, class b air = 8 kv, class b note 5 8 image sticking 25 , 4 hours note 6 frequency range : 10hz~55hz stoke : 1.5mm sweep : 10hz~55hz~10hz 9 vibration 2 hours for each direction of x,y,z. total 6 hours. non-operation jis c7021, a-10 condition a 10 mechanical shock 100g . 6ms, x,y,z 3 times for each direction non-operation jis c7021, a-7 condition c 11 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C6db/octave from 200~500hz iec 68-34 12 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces 13 pressure 5kg, 5sec note 7 note 1: ta: ambient temperature. tp: panel surface temperature note 2: in the standard conditions, there is not dis play function ng issue occurred. all the cosmetic specification is judged before the reliability stres s. note 3: all the cosmetic specification is judged befor e the reliability stress. note 4: temperature and relative umidity range is s hown in the figure below www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 20/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. note5 : all test techniques follow iec6100-4-2 stan dard. test condition note pattern procedure and set-up contact discharge 330?, 150pf, 1sec, 8 point, 10times/point air discharge 330?, 150pf, 1sec, 8 point, 10times/point criteria b C some performance degradation allowed. no data lo st. self-recoverable hardware failure. note 6: operate with chess board pattern as figure and lasting time and temperature as the conditions. then judge with 50% gray level, the mura is not wor se than auo defined limited sample. note 7: the panel is tested as figure. the jig is 10 mm made by cu with rubber and the loading speed is 3mm/min on position a~e. after the conditio n, no glass crack will be found and panel www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 21/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. function check is ok.( no guarantee lc mura lc bubble) loading lcm www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 22/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. f. packing and marking 1. packing form www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 23/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 2. module/panel label information the module/panel (collectively called as the product ) will be attached with a label of shipping number which represents the identification of the product at a specific location. refer to the product outline dra wing for detailed location and size of the label. the label is composed of a 22-digit serial number with the fol lowing definition: example: 501m06zl06123456781z05: product manufacturing week code: wk50 product version: version 1 product manufactuing factory: m06 3. carton label information the packing carton will be attached with a carton lab el where packing qty, auo model name, auo part number, customer part number (optional) and a serie s of carton number in 13 or 14 digits are printed. the carton number is apparing in the following format: refer to the drawing of packing format for the locat ion and size of the carton label. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 24/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. g. application note 1. system block example www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 25/25 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. h. precautions 1. do not twist or bend the module and prevent the unsuitable external force for display module during assembly. 2. adopt measures for good heat radiation. be sure to use the module with in the specified temperature . 3. avoid dust or oil mist during assembly. 4. follow the correct power sequence while operating . do not apply the invalid signal, otherwise, it wi ll cause improper shut down and damage the module. 5. less emi: it will be more safety and less noise. 6. please operate module in suitable temperature. t he response time & brightness will drift by differe nt temperature. 7. avoid to display the fixed pattern (exclude the white pattern) in a long period, otherwise, it will cause image sticking. 8. be sure to turn off the power when connecting or d isconnecting the circuit. 9. polarizer scratches easily, please handle it caref ully. 10. display surface never likes dirt or stains. 11. a dewdrop may lead to destruction. please wipe o ff any moisture before using module. 12. sudden temperature changes cause condensation, an d it will cause polarizer damaged. 13. high temperature and humidity may degrade perfo rmance. please do not expose the module to the direct sunlight and so on. 14. acetic acid or chlorine compounds are not friends with tft display module. 15. static electricity will damage the module, please do not touch the module without any grounded device. 16. do not disassemble and reassemble the module by self. 17. be careful do not touch the rear side directly. 18. no strong vibration or shock. it will cause module broken. 19. storage the modules in suitable environment wit h regular packing. 20. be careful of injury from a broken display module. 21. please avoid the pressure adding to the surface (front or rear side) of modules, because it will cau se the display non-uniformity or other function issue. 22. please use sscg(spread spectrum clock generator) a t system for emi reduction. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A070VW05-V1

	To Download A070VW05-V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .