View A070VW02V1_7871416.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. doc . ver s ion 0.1 total pages 15 date 2006/06/06 note: the content of this specification is subject to change . model name: a070 vw02 v1 product specification 7.0" color tft-lcd module < >preliminary specification < >final specification ? 2006 au optronics all rights reserved. do not copy
model: a070vw02 v1 version: 0.1 page: 1 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. record of revision version revise date page content 0.0 12/apr/2006 first draft. 0.1 6/jun/2006 4 revise weight 8 revise absolute maximum rating 9 revise tft- lcd typical operation condition 12 revise white chromaticity 13 revise the drawing of definition of viewing ang le
model: a070vw02 v1 version: 0.1 page: 2 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. contents general description 3 features 3 1. general information 4 2. electrical specifications 7 2.1 fpc p in a ssignment 7 2.2 a bsolute m aximum r atings 8 3. electrical characteristics 9 3.1 tft- lcd t ypical o peration c ondition (gnd=avss=0v) 9 3.2 b acklight d riving c onditions 9 3.3 ac t iming 10 3.3.1 i nput t iming d iagram 10 3.3.2 t iming condition 10 4. optical specification 12 5. absolute ratings of ambient environment 14 6. packing form 15
model: a070vw02 v1 version: 0.1 page: 3 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. general description a070vw02 v1 is a amorphous transmissive type tft (t hin film transistor) lcd (liquid crystal display). this model is composed of tft-lcd , drive ic, backlight unit, and driving board. features 7-inch display size wvga resolution and stripe dot arrangement built in timing controller and one dc-dc controller single 3.3v power supply for lcd. 6.6v/200ma for led backlight up/down, left/right reversion selection sync + de mode low power consumption ttl 6bits interface support: wide viewing angle green design
model: a070vw02 v1 version: 0.1 page: 4 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 1. general information no. item unit specification remark 1 display resolution dot 800rgb(h)480(v) 2 active area mm 152.40(h)91.44(v) 3 screen size inch 7.0(diagonal) 4 pixel pitch mm 0.1905(h)0.1905(v) 5 color configuration -- r. g. b. stripe note 1 6 color depth -- 262k colors note 2 7 overall dimension mm 165(h) 106(v) 5.5(t) note 3 8 weight g 130 +/- 10% 9 panel surface treatment -- anti-glare 10 display mode -- normally white note 1: below figure shows dot stripe arrangement. ` note 2: the 262k color display depends on 6-bit data si gnal (pin 13~35). note 3: not include backlight cable and screw height. re fer next page to get further information. r g b r g b r g b r g b r g b ???????????? . ???????????? . ????? ??? ( 1 2 3?.?????????????? .2398 2399 2400 ) ( 1?????????? ..480)
model: a070vw02 v1 version: 0.1 page: 5 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. o utline dimension of tft-lcd module ? front view
model: a070vw02 v1 version: 0.1 page: 6 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. o utline d imension of tft - lcd m odule ? back view
model: a070vw02 v1 version: 0.1 page: 7 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. electrical specifications 2.1 fpc pin assignment pin no symbol i/o function 1 u/d i up or down display control 2 vss g gnd 3 hsync i horizontal sync. 4 vdd p 3.3v power supply 5 vdd p 3.3v power supply 6 vdd p 3.3v power supply 7 vdd p 3.3v power supply 8 vsync i vertical sync. 9 de i data enable 10 vss g gnd 11 vss g gnd 12 vss g gnd 13 b5 i blue data 14 b4 i blue data 15 b3 i blue data 16 vss g gnd 17 b2 i blue data 18 b1 i blue data 19 b0 i blue data 20 vss g gnd 21 g5 i green data 22 g4 i green data 23 g3 i green data 24 vss g gnd 25 g2 i green data 26 g1 i green data 27 g0 i green data 28 vss g gnd 29 r5 i red data 30 r4 i red data 31 r3 i red data 32 vss g gnd 33 r2 i red data 34 r1 i red data
model: a070vw02 v1 version: 0.1 page: 8 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. i: input pin; p: power pin; g: ground pin 2.2 absolute maximum ratings product specification items symbol min. typ. max. unit power voltage vdd -0.5 3.6 v input signal voltage vi -0.3 vdd+0.3 v operation temperature topa 0 60 storage temperature tstg -20 65 pin no symbol i/o function 35 r0 i red data 36 vss g gnd 37 vss g gnd 38 dclk i data clock 39 vss g gnd 40 l/r i right or left display control
model: a070vw02 v1 version: 0.1 page: 9 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 3. electrical characteristics the following items are measured under stable condi tion and suggested application circuit. 3.1 tft- lcd typical operation condition (gnd=avss= 0v) product specification items symbol min. typ. max. unit power voltage vdd 3.0 3.3 3.5 v power current idd -- 0.15 0.2 a input signal voltage vi -0.3 -- vdd+0.3 v vih 0.8vdd -- vdd input signal h/l level voltage vil 0 -- 0.2vdd v note: above every operation range is based on stable o peration 3.2 backlight driving conditions parameter symbol min. typ. max. unit voltage for led vled -- 6.6 -- v current for led iled -- 200 240 ma
model: a070vw02 v1 version: 0.1 page: 10 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 3.3 ac timing 3.3.1 input timing diagram 3.3.2 timing condition 3.3.2.1. de mode item symbol min typ max unit remark clock frequency fck 20 33.3 42 mhz clock high time twcl 8 ns vil clock low time twch 8 ns vih clock rising time trclk 6 8 ns clock falling time tfclk 6 8 ns horizontal blanking thbl 95 128 280 clk horizontal period th 1056 clk vertical blanking tvbl 32 45 184 th vertical display area tvd 480 th de setup time tes 5 - - ns de hold time teh 10 - - ns note: above every operation range is based on stable o peration
model: a070vw02 v1 version: 0.1 page: 11 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 3.3.2.2 hv mode item symbol min typ max unit remark clock frequency fck 20 33.3 42 mhz clock high time twch 8 ns clock low time twcl 8 ns clock rising time trclk 2.5 ns clock falling time tfclk 2.5 ns hsync period th 895 1056 1088 clk hsync pulse width thw 4 - 81 clk hsync front porch thf 7 40 clk hsync back porch thb 7 60 84 clk hsync blanking thbl 95 128 280 clk hsync setup time ths 5 ns hsync hold time thh 10 ns vsync period tv 512 525 610 th vsync pulse width tvw 1 3 th vsync front porch tvf 13 th vsync blanking tvbl 32 45 184 th hsync/vsync phase shift tvpd 2 320 clk data setup time tds 5 ns data hold time tdh 10 ns note: above every operation range is based on stable o peration
model: a070vw02 v1 version: 0.1 page: 12 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 4. optical specification item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 - - 10 18 20 36 ms ms note 4 contrast ratio cr at optimized viewing angle 200 300 - note 6, 7 viewing angle top bottom left right cr 10 30 50 50 50 40 60 60 60 - - - deg. note 8 brightness y l =0 180 220 - cd/m 2 note 9 x =0 0.28 0.31 0.34 white chromaticity y =0 0.32 0.35 0.38 note 1 : ambient temperature =25 , and lamp current i l = 20ma. to be measured in the dark room. dc/ac inverter driving frequency: 70 khz. note 2 :to be measured on the center area of panel wi th a viewing cone of 1 by topcon luminance meter bm-5, after 15 minutes operation. note 3. definition of response time: the output signals of photo detector are measured when the input signals are changed from ?black? to ?white?(falling time) and from ?white? to ?black?(rising time), respectively. the response time is defined as the time interval bet ween the 10% and 90% of amplitudes. refer to figure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100%
model: a070vw02 v1 version: 0.1 page: 13 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note 4. definition of contrast ratio: contrast ratio is calculated with the following formul a. contrast ratio (cr)= note 5. white v i =v i50 1.5v black v i =v i50 2.0v ?? means that the analog input signal swings in phase with vcom signal. ?+? means that the analog input signal swings out of p hase with vcom signal. v i50 : the analog input voltage when transmission is 50% the 100% transmission is defined as the transmission of l cd panel when all the input terminals of module are electrically opened. note 6. definition of viewing angle, refer to figur e as below. note 7. measured at the center area of the panel when all the input terminals of lcd panel are electrically opened. photo detector output when lcd is at ?white? state photo detector output when lcd is at ?black? state
model: a070vw02 v1 version: 0.1 page: 14 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 5. absolute ratings of ambient environment no. test items conditions remark 1 high temperature storage ta= 65 240hrs 2 low temperature storage ta= -20 240hrs 3 high ttemperature operation ta= 60 240hrs 4 low temperature operation ta= 0 240hrs 5 high temperature & high humidity ta= 50 . 80% rh 240hrs operation 6 heat shock -20 ~60 , 50 cycle, 2hrs/cycle non-operation 7 electrostatic discharge 200v,200pf(0 ? ), once for each terminal non-operation frequency range : 10~55hz stoke : 1.5mm sweep : 10 ~ 55 ~ 10hz 2 hours for each directi on of x,y,z 8 vibration (6 hours for total) jis c7021, a-10 condition a 9 mechanical shock 100g . 6ms, x,y,z 3 times for each direction non-operation jis c7021, a - 7 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz ? 6db/octave from 200~500hz iec 68-34 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces note: ta: ambient temperature.
model: a070vw02 v1 version: 0.1 page: 15 / 15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 6. packing form (5pcs/layer) (30pcs/box) (7 layer/box)

▲Up To Search▲

Price & Availability of A070VW02V1

	To Download A070VW02V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .