t qp4m00 08 low loss reflective spdt switch applications ? wlan ? cellular infrastructure ? test and measur ement ? smart energy ? uhf/vhf ? lmr ? general purpose broadband wireless 6 - pin 2 x 2 mm s lp package ordering information part no. description tqp4m0008 spdt reflective switch tqp4m0008 - pcb 0.1 - 6 ghz evaluation board standard t/r size = 2500 pieces on a 7 ? reel functional block diagram product features ? ? broadband: 100? 600 0 mhz ? low insertion loss: 0.3 db at 1 ghz ? high input ip3: +56 dbm at 1 ghz ? cmos compatible dual voltage control ? lead free, rohs compliant smt package pin configuration pin no. symbol 1 rf2 2 gnd 3 rf1 4 v1 5 rfc 6 v2 backside paddle rf/dc gnd general description the tqp4m0008 is a gaas fet single - pole, double throw (spdt) low loss reflective switch with good isolation . the tqp4m0008 may be o perated dc control signals from 1.8 to 5 volts. the tq p4m0008 has 100? d atasheet: rev . d 10- 2 2 - 1 4 - 1 of 7 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp4m00 08 low loss reflective spdt switch electrical specifications test conditions unless otherwise noted: v1=+3 v, v2=0 v, temp=25c , 50 system parameter conditions min typ max unit s operational frequency range 100 60 00 mhz control voltage (v1, v2) (1) low 0 0. 45 v high + 1.8 + 3.3 + 5 v insertion loss 0.1 ? 1.0 ghz 1.0 ? 2.5 ghz 2.5 ? 3.0 ghz 3.0 ? 4.5 ghz 4.5 ? 6.0 ghz 0. 3 5 0. 4 5 0. 55 0. 65 0.85 db isolation 0.1 ? 1.0 ghz 1.0 ? 2.5 ghz 2.5 ? 3.0 ghz 3.0 ? 4.5 ghz 4.5 ? 6.0 ghz 3 0 25 22 20 17 db rfc return loss 0.1 ? 1.0 ghz 1.0 ? 2.5 ghz 2.5 ? 3.0 ghz 3.0 ? 4.5 ghz 4.5 ? 6.0 ghz 2 0 15 15 17 15 db input p1db (1) f =1 ghz + 3 7 dbm input ip3 (1) f =1 ghz, f=1 mhz + 3.3 v . absolute maximum ratings parameter rating storage temperature - 65 to 150c rf input power , cw, 50, recommended operating conditions parameter min typ m ax units v1 , v2 high state + 1.8 + 3.3 + 5 . 0 v operating temp. range ? digital control voltages state bias condition low + 0. 45 v high +1.8 v switch control truth table control voltages signal path state rfc to rf2 low high off (isolat ion) on (insertion loss) high low on (insertion loss) off (isolation) d atasheet: rev . d 10- 2 2 - 1 4 - 2 of 7 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp4m00 08 low loss reflective spdt switch tqp4m00 08 - pcb evaluation board j4 c4 c3 c1 j5 j6 c5 c2 u1 j2 j7 j1 j3 j8 j5 v2 j2 rf1 backside paddle j3 rfc j6 gnd j7 rf input c5 100 pf j8 rf output c4 100 pf pcb loss calibration line u1 1 2 3 6 5 4 j1 rf2 c1 100 pf c2 100 pf c3 100 pf j4 v1 triquint pcb 1094172 material and stack - up 1 oz. cu bottom layer nelco n-4000-13 core nelco n-4000-13 r =3.7 typ. 1 oz. cu top layer 1 oz. cu inner layer 1 oz. cu inner layer 0.014" 0.014" 0.062" 0.006" finished board thickness 50 ohm line dimensions: width = .021? spacing = .006 ? notes: 1. j7 to j8 thru line may be used to de- embed pcb losses to device. typical performance ? tqp4m0008 - pcb test conditions unless otherwise noted: v 1 = + 3 v , v2 =0 v , temp= 25 c , 50 system parameter typical value units frequency 1 2 3 g hz insertion loss (1) 0.3 0.4 0.45 db rfc port return loss 19 15 14 db rfc to rf1/rf2 isolation 32 26 2 4 db rf1 to rf2 isolation 33 26 25 db input p1db +36 +35.5 +35 dbm input ip3 ( f=1 ghz, 1 mhz tone spacing, pout=+15 dbm/tone) +54 +57 +59 dbm notes: 1. insertion loss values reflect de - embedding of eval uation board rf line losse s. d atasheet: rev . d 10- 2 2 - 1 4 - 3 of 7 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp4m00 08 low loss reflective spdt switch performance plots ? tqp4m0008 - pcb test conditions unless otherwise noted: v1=+3 v, v2 = 0 v, temp=+25c, 50 system - 1.5 - 1 - 0.5 0 0.5 0 1 2 3 4 5 6 |s21| (db) frequency (ghz) insertion loss vs. frequency rfc to rf1 or rf2 temp.=+25 c - 35 - 30 - 25 - 20 - 15 - 10 - 5 0 0 1 2 3 4 5 6 |s11| (db) frequency (ghz) rfc port return loss temp.=+25 c 45 50 55 60 65 0 0.5 1 1.5 2 2.5 3 3.5 iip3 (dbm) frequency (ghz iip3 vs. frequency 1 mhz tone spacing pout=+15 dbm/tone temp.=+25 c 20 25 30 35 40 45 50 0 0.5 1 1.5 2 2.5 3 3.5 p1db (dbm) frequency (ghz) p1db vs. frequency temp.=+25 c - 60 - 50 - 40 - 30 - 20 - 10 0 0 1 2 3 4 5 6 |s21| (db) frequency (ghz) rfc to rf1/rf2 isolation vs. frequency temp.=+25 c - 60 - 50 - 40 - 30 - 20 - 10 0 0 1 2 3 4 5 6 |s21| (db) frequency (ghz) rf1 to rf2 isolation vs. frequency temp.=+25 c d atasheet: rev . d 10- 2 2 - 1 4 - 4 of 7 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp4m00 08 low loss reflective spdt switch pin configuration and description 1 2 3 gnd rf1 rf2 rfc v1 v2 backside paddle - rf/dc gnd pin 1 reference mark 6 5 4 pin no. symbol description 1 rf2 rf output 2 , dc voltage present, dc block required. 2 gnd rf/dc ground 3 rf1 rf output 1 , dc voltage present, dc block required. 4 v1 control voltage 5 rfc antenna input , dc voltage present, dc block required. 6 v2 control voltage backside paddle rf/dc gnd rf/dc ground. use recommended via pattern and ensure go od solder attach for best thermal and electrical performance. d atasheet: rev . d 10- 2 2 - 1 4 - 5 of 7 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp4m00 08 low loss reflective spdt switch mechanical information package marking and dimensions marking: part number ? 08s7 year, week - yyww assembly code - xxxxx n otes : 1. all dimensions are in millimeters. angles are in degrees. 2. dimension and tolerance formats conform to asme y14.4m - 1994. 3. the terminal #1 identifier and terminal numbering conform to jesd 95 - 1 spp- 012 pcb mounting pattern n otes : 1. all dimensions are in millimeters. angles are in degrees. 2. use 1 oz . copper minimum for top and bottom layer metal. 3. we recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10?). 4. ensure good package backside paddle solder attach for reliable operation a nd bes t electrical performance. 08s7 yyww xxxx d atasheet: rev . d 10- 2 2 - 1 4 - 6 of 7 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp4m00 08 low loss reflective spdt switch product compliance information esd sensitivity ratings caution! esd - sensitive device esd rating: class 1c (rf ports) value: 1000 v to <2 00 0 v esd rating: class 1 b (dc lines) value: 500 v to <1000 v test: human body model (hbm) standard: jedec standard jesd22 - a114 esd rating: class iv value: >1000 v test: charged device model (cdm) standard: jedec standard jesd22 - c101 solderability comp atible with both lead - free (260 c max. reflow temperature) and tin/lead (245 c max. reflow temperature) soldering processes. package contact plating: nipdau rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electric al and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp - a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free msl rating msl rating : level 1 test: 260c convection reflow standard: jedec standard ipc/jedec j - std - 020 important notice for the latest specifications, additional product information, worldwide sales and distribution locations, and information about triquint: web: www.triqu int.com tel: +1.503.615.9000 email: info - sales@triquint.com fax: +1.503.615.8902 for technical questions and application information: email: sjcapplications.engineering@triquint.com contact information the information contained herein is believed to be reliable. triquint makes no warranties regarding the information contained herein. triquint assumes no responsibility or liability w hatsoever for any of the information contained herein. triquint assumes no responsibility or liability whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely with the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything desc ribed by such information. triquint products are not warranted or authorized for use as critical components in medical, life - saving, or life - sustaining applications, or other applications where a failure would reasonably be expected to cause severe perso nal injury or death. d atasheet: rev . d 10- 2 2 - 1 4 - 7 of 7 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
|
