 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| revisions ltr description date (yr-mo-da) approved p add case outline m. technical changes and corrections to table i. editorial changes throughout. 93-10-02 m. a. frye r add class v level devices. update boilerplate. - ro 99-06-08 r. monnin t add case outline n. make changes to 1.2.4, p d , theta jc, i max as specified in 1.3, table i, and figure 1. - ro 99-09-23 r. monnin u add radiation hardened requirements to device types 02 and 07 for case outline u. add terminal assignment tabl e for case outline n as specified in figure 1. add case outline 4 for device type 07. - ro 00-10-11 r. monnin v add case outlines 5 and 6. make changes to 1.2.4, p d , theta jc, i max as specified in 1.3, table i, and figure 1. update boilerplate to reflect current requirements. - rrp 03-12-10 r. monnin w add a footnote to the case outline u, to-257 package as specified under 1.2.4 and figure 1. - ro 05-02-07 r. monnin x for case outline ?t? only, add a footnote 1 / under 1.2.4 and make change to note 3 under figure 1. for device types 02, 04, 07, and 08 add pin outs under case outline 2 in figure 1. -rrp 06-01-30 r. monnin the original first sheet of this drawing has been replaced. rev x x x x x x x x x x x sheet 35 36 37 38 39 40 41 42 43 44 45 rev x x x x x x x x x x x x x x x x x x x x sheet 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 rev status rev x x x x x x x x x x x x x x of sheets sheet 1 2 3 4 5 6 7 8 9 10 11 12 13 14 pmic n/a prepared by william e. shoup defense supply center columbus standard microcircuit drawing checked by c.r. jackson columbus, ohio 43218-3990 http://www.d scc.dla.mil this drawing is available for use by all departments approved by n. a. hauck microcircuit, linear, adjustable voltage regulator, monolithic silicon and agencies of the department of defense drawing approval date 77-09-15 amsc n/a revision level x size a cage code 67268 77034 sheet 1 of 45 dscc form 2233 apr 97 5962-e015-06 .
standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 2 dscc form 2234 apr 97 1. scope 1.1 scope . this drawing documents two product assurance class leve ls consisting of high reliability (device classes q and m) and space application (device class v). a c hoice of case outlines and lead finishes ar e available and are reflected in the par t or identifying number (pin). when available, a choice of radiation hardness assu rance (rha) levels are reflected in the pin. 1.2 pin . the pin is as shown in the following examples. for device classes m and q: 77034 01 m x drawing number device type (see 1.2.2) case outline (see 1.2.4) lead finish (see 1.2.5) for device class v: 5962 - 77034 01 v x x federal stock class designator rha designator (see 1.2.1) device type (see 1.2.2) device class designator case outline (see 1.2.4) lead finish (see 1.2.5) \ / (see 1.2.3) \/ drawing number for device classes m, q, and v radiation hardened devices: 5962 r 77034 02 m u x federal stock class designator rha designator (see 1.2.1) device type (see 1.2.2) device class designator case outline (see 1.2.4) lead finish (see 1.2.5) \ / (see 1.2.3) \/ drawing number 1.2.1 rha designator . device classes q and v rha marked devices m eet the mil-prf-38535 specif ied rha levels and are marked with the appropriate rha designator. device cl ass m rha marked devices m eet the mil-prf-38535, appendix a specified rha levels and are marked with the appropriate rha designator. a dash (-) indicates a non-rha device. 1.2.2 device type(s) . the device type(s) identify the circuit function as follows: device type generic number circuit function 01 lm117 positive adjustable voltage regulator 02 lm117hv positive adjustabl e voltage regulator, high voltage 03 lm137 negative adjust able voltage regulator 04 lm137hv negative adjustable voltage regulator, high voltage 05 lt117a positive adjustable voltage regulator 06 lt137a negative adjus table voltage regulator 07 lt117ahv positive adjustabl e voltage regulator, high voltage 08 lt137ahv negative adjustabl e voltage regulator, high voltage standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 3 dscc form 2234 apr 97 1.2.3 device class designator . the device class designator is a single letter identifying the product assu rance level as listed below. since the device class designator has been added after the original issuance of this drawing, device classes m and q designators will not be included in the pin and will not be marked on the device except for those devices that use a rha designator device class device requirements documentation m vendor self-certification to the requirements for mil-std-883 compliant, non- jan class level b microcircuits in accordance with mil-prf-38535, appendix a q or v certification and qua lification to mil-prf-38535 1.2.4 case outline(s) . the case outline(s) are as des ignated in mil-std-1835 and as follows: outline letter descriptive designator terminals package style m see figure 1 3 power surface mount n see figure 1 3 surface mount t 1 / see figure 1 3 to-257 flange mount, glass sealed u 1 / see figure 1 3 to-257 flange mount with isolated tab, glass sealed x see figure 1 3 to-39 can y mbfm1-p2 2 flange mount z mbfm4-p2 2 flange mount 2 cqcc1-n20 20 square leadless chip carrier 4 see figure 1 3 smd-257-a flange mount, glass sealed 5 see figure 1 18 rectangular leadless chip carrier 6 see figure 1 18 rectangular leadless chip carrier 1.2.5 lead finish . the lead finish is as specified in mil- prf-38535 for device classes q and v or mil-prf-38535, appendix a for device class m. 1.3 absolute maximum ratings . 2 / power dissipation (p d ): case x ....................................................................................................... 2 w cases m, n, t, u, y, z and 4 (internally lim ited) ....................................... 20 w case 2: at t a = +25 c ......................................................................................... 1.1 w at t c = +25 c ........................................................................................ 6.2 w cases 5 and 6 at t c = +25 c ..................................................................... 10 w input-output vo ltage differential: device types 01, 03, 05, 06 ....................................................................... 40 v dc device types 02, 07 ................................................................................... 60 v dc device types 04, 08 ................................................................................... 50 v dc operating junction te mperature r ange ........................................................... -55 c to +150 c storage temper ature ..................................................................................... -65 c to +150 c lead temperature (solderi ng, 10 seconds ) ................................................... 300 c thermal resistance, junction to case ( jc ): cases m, n, and t ................................................................................... 3.5 c/w cases u and 4 ........................................................................................ 4.2 c/w case x .................................................................................................... 15 c/w case y .................................................................................................... 3 c/w case z .................................................................................................... 5 c/w case 2 ..................................................................................................... see mil-std-18 35 cases 5 and 6 ......................................................................................... 13 c/w 1 / for outline letters t and u, cage 34333 manufac turers the to-257 package with ceramic seal. 2 / stresses above the absolute maximum rating may cause permanent damage to the device. extended operation at the maximum levels may degrade performance and affect reliability. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 4 dscc form 2234 apr 97 1.3 absolute maximum ratings ? continued. 2 / maximum output current (i max ): cases x, 2, 5, and 6 ................................................................................ 0.5 a cases m, n, t, u, y, z, and 4 ................................................................. 1.5 a 1.4 recommended operating conditions . output voltage range: device types 01, 05 ................................................................................. 1.2 to 37 v dc device types 02, 07 ................................................................................. 1.2 to 57 v dc device types 03, 06 ................................................................................. -1.2 to -37 v dc device types 04, 08 ................................................................................. -1.2 to -47 v dc ambient operating temperature range (t a ) ................................................. -55 c to +125 c input voltage range: device types 01, 05 ................................................................................. 4.25 v dc to 41.25 v d c device types 03, 06 ................................................................................. -4.25 v dc to -41.25 v dc device types 02, 07 ................................................................................. 4.25 v dc to 61.25 v d c device types 04, 08 ................................................................................. -4.25 v dc to -51.25 v dc 1.5 radiation features . maximum total dose available (dose rate = 50 ? 300 rads(si)/s): 3 / device types 02 and 07 ........................................................................... 100 krads(si) 2. applicable documents 2.1 government specif ication, standards, and handbooks . the following specificati on, standards, and handbooks form a part of this drawing to the extent specified herein. unless otherwise specified, the issues of thes e documents are those cited in t he solicitation or contract. department of defense specification mil-prf-38535 - integrated circuits, manufacturing, general specification for. department of defense standards mil-std-883 - test me thod standard microcircuits. mil-std-1835 - interface standard electronic component case outlines. department of defense handbooks mil-hdbk-103 - list of st andard microcircuit drawings. mil-hdbk-780 - standard microcircuit drawings. (copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or http://assist.daps.dla.mil or from the standardization document order desk, 700 robbins avenue, building 4d, philadelphia, pa 19111-5094.) 3 / these parts may be dose rate sensitive in a space environment and may demonstrate enhanc ed low dose rate effects. radiation end point limits for the noted parameters are guar anteed only for the conditions s pecified in mil-std-883, method 1019, condition a. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 5 dscc form 2234 apr 97 2.2 order of precedence . in the event of a conflict between the text of this drawing and the refe rences cited herei n, the text of this drawing takes precedence. nothing in this documen t, however, supersedes applicable laws and regulations unless a specific exempti on has been obtained. 3. requirements 3.1 item requirements . the individual item requirements for device classes q and v shall be in accordance with mil-prf-38535 and as specified herein or as modified in the device manufacture r's quality management (qm) plan. the modification in the qm plan shall not affe ct the form, fit, or function as described herein. the individual item requirements for device class m shall be in accordance with mil-prf-38535, appendix a for non-jan class level b devices and as specified herein. 3.2 design, construction, and physical dimensions . the design, construction, and physical dimensions shall be as specified in mil-prf-38535 and herein for device classes q and v or mil-prf-38535, appendix a and herein for device class m. 3.2.1 case outlines . the case outlines shall be in acco rdance with 1.2.4 herein and figure 1. 3.2.2 terminal connections . the terminal connections shall be as specified on figure 1. 3.2.3 radiation exposure circuit . the radiation exposure circuit shall be maintained by the manufacturer under document revision level control and shall be made available to the preparing and acquiring activity upon request. 3.3 electrical performance characteri stics and postirradiati on parameter limits . unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limit s are as specified in table i and shall apply over th e full ambient operating te mperature range. 3.4 electrical test requirements . the electrical test requirements shall be the subgroups specified in table iia. the electrical tests for each subgroup are defined in table i. 3.5 marking . the part shall be marked with the pin listed in 1.2 her ein. in addition, the manufacturer's pin may also be marked. for packages where marking of t he entire smd pin number is not feasible due to space lim itations, the manufacturer has the option of not marking the "5962-" on the device. for rha product using this option, the rha designator shall still be marked. marking for device classes q and v shall be in accor dance with mil-prf-38535. marking for device class m shall be in accordance with mil-prf-38535, appendix a. 3.5.1 certificat ion/compliance mark . the certification mark for device classes q and v shall be a "qml" or "q" as required in mil-prf-38535. the compliance mark for device class m shall be a "c" as required in mil-prf-38535, appendix a. 3.6 certificate of compliance . for device classes q and v, a certificate of compliance shall be required from a qml-38535 listed manufacturer in order to supply to t he requirements of this draw ing (see 6.6.1 herein). for device class m, a certifica te of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in mil-hdbk-103 (see 6.6.2 herein). the certificate of compliance submitted to dscc-va prior to lis ting as an approved source of supply for this drawing shall affirm that the manufacture r's product meets, for device classes q and v, the requirement s of mil-prf-38535 and herein or for device class m, the require ments of mil-prf-38535, appendix a and herein. 3.7 certificate of conformance . a certificate of conformanc e as required for device classes q and v in mil-prf-38535 or for device class m in mil-prf-38535, appendix a shall be provided with each lot of microcircuits delivered to this drawing. 3.8 notification of change for device class m . for device class m, notification to dscc-va of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 verification and review for device class m . for device class m, dscc, dscc's agent, and the acquiring activity retain the option to review the manufacturer's facility and applicable requir ed documentation. offshore documentation shall be made available onshore at the option of the reviewer. 3.10 microcircuit group assignment for device class m . device class m devices covered by this drawing shall be in microcircuit group number 52 (see mil-prf-38535, appendix a). standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 6 dscc form 2234 apr 97 table i. electrical performance characteristics . test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases x, 2, 5 and 6 reference voltage v ref v diff = 3.0 v 1 01 1.20 1.30 v v diff = 3.3 v 2,3 1.20 1.30 v diff = 40 v 1,2,3 1.20 1.30 line regulation r line 3.0 v diff 40 v, v out = v ref 1 01 9 mv 3.3 v diff 40 v, v out = v ref 2,3 23 load regulation 1 / r load v diff = 3 v, 10 ma i l 500 ma 1 01 15 mv v diff = 3.3 v, 10 ma i l 500 ma 2,3 15 v diff = 40v, 10 ma i l 150 ma 1 15 v diff = 40 v, 10 ma i l 100 ma 2,3 15 thermal regulation v rth v in = +14.6 v, i l = 300 ma, t = 20 ms, p d = 4 w, t a =+25 c 1 01 3.1 mv ripple rejection r n f = 120 hz, c adj = 10 f, v out = v ref 2 / 4,5,6 01 66 db adjustment pin current i adj v diff = 3.0 v 1 01 100 a v diff = 3.3 v 2,3 100 v diff = 40 v 1,2,3 100 adjustment pin current change ? i adj v diff = 3 v, 10 ma i l 500 ma 1 01 5 a v diff = 3.3 v, 10 ma i l 500 ma 2,3 5 v diff = 40 v, 10 ma i l 150 ma 1 5 v diff = 40 v, 10 ma i l 100 ma 2,3 5 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 7 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases x, 2, 5 and 6 - continued. adjustment pin current ? i adj 3 v v diff 40 v 1 01 5 a change 3.3 v v diff 40 v 2,3 5 minimum load current i lmin v diff = 3.0 v, v out = 1.4 v (forced) 1 01 5 ma v diff = 3.3 v, v out = 1.4 v (forced) 2,3 5 v diff = 40 v, v out = 1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 15 v 1,2,3 01 0.5 1.65 a v diff = 40 v 1 0.15 0.65 cases m, n, t, u, y, z reference voltage v ref v diff = 3.0 v 1 01 1.20 1.30 v v diff = 3.3 v 2,3 1.20 1.30 v diff = 40 v 1,2,3 1.20 1.30 line regulation r line v out = v ref , 3.0 v v diff 40 v 1 01 9 mv v out = v ref , 3.3 v vdiff 40 v 2,3 23 load regulation 1 / r load v diff = 3 v, 10 ma i l 1.5 a 1 01 15 mv v diff = 3.3 v, 10 ma i l 1.5 a 2,3 15 v diff = 40v, 10 ma i l 300 ma 1 15 v diff = 40 v, 10 ma i l 195 ma 2,3 15 thermal regulation v rth v in = 14.6 v, i l = 1.5 a, p d = 20 watts, t = 20 ms, t a = +25 c 1 01 16 mv see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 8 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases m, n, t, u, y, z - continued. ripple rejection r n f = 120 hz, c adj = 10 f, v out = v ref 2 / 4,5,6 01 66 db adjustment pin current i adj v diff = 3.0 v 1 01 100 a v diff = 3.3 v 2,3 100 v diff = 40 v 1,2,3 100 adjustment pin current change ? i adj v diff = 3 v, 10 ma i l 1.5 a 1 01 5 a v diff = 3.3 v, 10 ma i l 1.5 a 2,3 5 v diff = 40 v, 10 ma i l 300 ma 1 5 v diff = 40 v, 10 ma i l 195 ma 2,3 5 3 v v diff 40 v 1 5 3.3 v v diff 40 v 2,3 5 minimum load current i lmin v diff = 3.0 v, v out = 1.4 v (forced) 1 01 5 ma v diff = 3.3 v, v out = 1.4 v (forced) 2,3 5 v diff = 40 v, v out = 1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 15 v 1,2,3 01 1.50 3.50 a v diff = 40 v 1 0.18 1.5 cases x, 2, 5, and 6 reference voltage v ref v diff = 3.0 v 1 02 1.20 1.30 v v diff = 3.3 v 2,3 1.20 1.30 v diff = 40 v 1,2,3 1.20 1.30 v diff = 60 v 1,2,3 1.20 1.30 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 9 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases x, 2, 5, and 6 - continued. line regulation 3 / r line v out = v ref , 3.0 v v diff 40 v 1 02 9 mv v out = v ref , 3.3 v v diff 40 v 2,3 23 v out = v ref , 1 5 40 v v diff 60 v 2,3 10 load regulation 1 / r load v diff = 3 v, 10 ma i l 500 ma 1 02 15 mv v diff = 3.3 v, 10 ma i l 500 ma 2,3 15 v diff = 40v, 10 ma i l 150 ma 1 15 v diff = 40 v, 10 ma i l 100 ma 2,3 15 v diff = 60 v, 10 ma i l 20 ma 1,2,3 15 thermal regulation v rth v in = 14.6 v, i l = 300 ma, t = 20 ms, p d = 4 w, t a = +25 c 1 02 3.1 mv ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref , i out = 100 ma 4,5,6 02 66 db adjustment pin current i adj v diff = 3.0 v 1 02 100 a v diff = 3.3 v 2,3 100 v diff = 40 v 1,2,3 100 v diff = 60 v 1,2,3 100 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 10 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max case x, 2, 5, and 6 - continued. adjustment pin current change ? i adj v diff = 3 v, 10 ma i l 500 ma 1 02 5 a v diff = 3.3 v, 10 ma i l 500 ma 2,3 5 v diff = 40 v, 10 ma i l 150 ma 1 5 v diff = 40 v, 10 ma i l 100 ma 2,3 5 3 v v diff 40 v 1 5 3.3 v v diff 40 v 2,3 5 3.3 v v diff 60 v 1,2,3 5 minimum load current i lmin v diff = 3.0 v, v out = 1.4 v (forced) 1 02 5 ma v diff = 3.3 v, v out = 1.4 v (forced) 2,3 5 v diff = 40 v, v out = 1.4 v (forced) 1,2,3 5 v diff = 60 v, v out = 1.4 v (forced) 1,2,3 7 current limit 2 / i cl v diff = 5 v 1,2,3 02 0.5 1.65 a v diff = 40 v 1 0.15 0.65 v diff = 60 v 1 0.02 0.28 cases m, n, t, u, y, z 4 / 5 / reference voltage v ref v diff = 3.0 v 1 02 1.20 1.30 v m,d,p,l,r 1 1.20 1.30 v diff = 3.3 v 2,3 1.20 1.30 v diff = 40 v 1,2,3 1.20 1.30 m,d,p,l,r 1 1.20 1.30 v diff = 60 v 1,2,3 1.20 1.30 m,d,p,l,r 1 1.20 1.30 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 11 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases m, n, t, u, y, z - continued. 4 / 5 / line regulation 3 / r line v out = v ref , 3.0 v v diff 40 v 1 02 9 mv m,d,p,l,r 1 9 v out = v ref , 3.3 v v diff 40 v 2,3 23 v out = v ref , 1 5 40 v v diff 60 v 2,3 10 m,d,p,l,r 1 5 load regulation 1 / r load v diff = 3 v, 10 ma i l 1.5 a 1 02 15 mv m,d,p,l,r 1 15 v diff = 3.3 v, 10 ma i l 1.5 a 2,3 15 v diff = 40v, 10 ma i l 300 ma 1 15 m,d,p,l,r 1 15 v diff = 40 v, 10 ma i l 195 ma 2,3 15 v diff = 60 v, 10 ma i l 30 ma 1,2,3 15 m,d,p,l,r 1 15 thermal regulation v rth v in = 14.6 v, i l = 1.5 a, p d = 20 watts, t = 20 ms, t a = +25 c 1 02 16 mv m,d,p,l,r 1 16 ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref , i out = 100 ma 4,5,6 02 66 db adjustment pin current i adj v diff = 3.0 v 1 02 100 a m,d,p,l,r 1 100 v diff = 3.3 v 2,3 100 v diff = 40 v 1,2,3 100 m,d,p,l,r 1 100 v diff = 60 v 1,2,3 100 m,d,p,l,r 1 100 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 12 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases m, n, t, u, y, z - continued. 4 / 5 / adjustment pin current change ? i adj v diff = 3 v, 10 ma i l 1.5 a 1 02 5 a m,d,p,l,r 1 5 v diff = 3.3 v, 10 ma i l 1.5 a 2,3 5 v diff = 40 v, 10 ma i l 300 ma 1 5 m,d,p,l,r 1 5 v diff = 40 v, 10 ma i l 195 ma 2,3 5 3 v v diff 40 v 1 5 m,d,p,l,r 1 5 3.3 v v diff 40 v 2,3 5 3.3 v v diff 60 v 1,2,3 5 m,d,p,l,r 1 5 minimum load current i lmin v diff = 3.0 v, v out = 1.4 v (forced) 1 02 5 ma m,d,p,l,r 1 5 v diff = 3.3 v, v out = 1.4 v (forced) 2,3 5 v diff = 40 v, v out = 1.4 v (forced) 1,2,3 5 m,d,p,l,r 1 5 v diff = 60 v, v out = 1.4 v (forced) 1,2,3 7 m,d,p,l,r 1 7 current limit 2 / i cl v diff = 5 v 1,2,3 02 1.5 3.5 a m,d,p,l,r 1 1.5 3.5 v diff = 40 v 1 0.3 1.5 m,d,p,l,r 1 0.3 1.5 v diff = 60 v 1 0.05 0.50 m,d,p,l,r 1 0.05 0.50 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 13 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases x, 2, 5, and 6 reference voltage v ref v diff = 3.0 v 1 03 -1.275 -1.225 v 2,3 -1.30 -1.20 v diff = 40 v 1 -1.275 -1.225 2,3 -1.30 -1.20 line regulation r line 3.0 v v diff 40 v 1 03 9 mv 2,3 23 load regulation 1 / r load v diff = 5 v, 8 ma i l 200 ma 1,2,3 03 25 mv v diff = 15 v, 8 ma i l 200 ma 1,2,3 25 v diff = 40v, 8 ma i l 150 ma 1 25 v diff = 40 v, 8 ma i l 50 ma 2,3 25 thermal regulation v rth v in = -16.25 v, i l = 330 ma, t a = +25 c p d = 5 watts, t = 10 ms, 1 03 2 mv ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref 4,5,6 03 66 db adjustment pin current i adj v diff = 3.0 v 1,2,3 03 100 a v diff = 40 v 1,2,3 100 adjustment pin current change ? i adj (line) 3.0 v v diff 40 v 1,2,3 03 5 a ? i adj (load) v diff = 5.0 v, 8 ma i l 500 ma 1,2,3 5 minimum load current i lmin v diff = 3.0 v, v out = -1.4 v (forced) 1,2,3 03 3 ma v diff = 10 v, v out = -1.4 v (forced) 1,2,3 3 v diff = 40 v, v out = -1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 5 v, t a = +25 c 1 03 0.5 1.8 a v diff = 40 v, t a = +25 c 1 0.15 0.65 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 14 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases m, n, t, u, y, z reference voltage v ref v diff = 3.0 v 1 03 -1.275 -1.225 v 2,3 -1.30 -1.20 v diff = 40 v 1 -1.275 -1.225 2,3 -1.30 -1.20 line regulation r line 3.0 v v diff 40 v 1 03 9 mv 2,3 23 load regulation 1 / r load v diff = 5 v, 8 ma i l 1.5 a 1,2,3 03 25 mv v diff = 12 v, 8 ma i l 1.5 a 1 25 v diff = 40v, 8 ma i l 200 ma 1 25 v diff = 40 v, 8 ma i l 100 ma 2,3 25 thermal regulation v rth v in = -14.6 v, i l = 1.5 a, p d = 20 watts, t = 10 ms, t a = +25 c 1 03 5 mv ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref 4,5,6 03 66 db adjustment pin current i adj v diff = 3.0 v 1,2,3 03 100 a v diff = 40 v 1,2,3 100 adjustment pin current change ? i adj (line) 3.0 v v diff 40 v 1,2,3 03 5 a ? i adj (load) v diff = 5.0 v, 8 ma i l 1.5 a 1,2,3 5 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 15 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases m, n, t, u, y, z - continued. minimum load current i lmin v diff = 3.0 v, v out = -1.4 v (forced) 1,2,3 03 3 ma v diff = 10 v, v out = -1.4 v (forced) 1,2,3 3 v diff = 40 v, v out = -1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 5 v 1,2,3 03 1.5 3.5 a v diff = 40 v 1 0.24 1.2 cases x, 2, 5, and 6 reference voltage v ref v diff = 3.0 v 1 04 -1.275 -1.225 v 2,3 -1.300 -1.200 v diff = 40 v 1 -1.275 -1.225 2,3 -1.300 -1.200 v diff = 50 v 1 -1.275 -1.225 2,3 -1.300 -1.200 line regulation r line 3.0 v v diff 50 v 1 04 10 mv 2,3 25 load regulation 1 / r load v diff = 50 v, 8 ma i l 100 ma 1 04 25 mv v diff = 5.0 v, 1 31 8 ma i l 500 ma 2,3 50 thermal regulation v rth v in = -16.25 v, i l = 330 ma, p d = 5 watts, t = 10 ms, t a = +25 c 1 04 2 mv ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref 4,5,6 04 66 db see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 16 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases x, 2, 5, and 6 - continued. adjustment pin current i adj-1 v diff = 3.0 v 1,2,3 04 100 a i adj-2 v diff = 40 v 1,2,3 100 i adj-3 v diff = 50 v 1,2,3 100 adjustment pin current change ? i adj v diff = 5.0 v, 8 ma i out 200 ma 1,2,3 04 5 a i l = 8 ma, 3.0 v v diff 50 v 1,2,3 6 minimum load current i lmin v diff = 3.0 v, v out = -1.4 v (forced) 1,2,3 04 3 ma v diff = 10 v, v out = -1.4 v (forced) 1,2,3 3 v diff = 40 v, v out = -1.4 v (forced) 1,2,3 5 v diff = 50 v, v out = -1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 5 v 1,2,3 04 0.5 1.8 a v diff = 50 v 1 0.1 0.65 cases m, n, t, u, y, z reference voltage v ref v diff = 3.0 v 1 04 -1.275 -1.225 v 2,3 -1.300 -1.200 v diff = 50 v 1 -1.275 -1.225 2,3 -1.300 -1.200 line regulation r line 3.0 v v diff 50 v 1 04 10 mv 2,3 25 load regulation 1 / r load v diff = 50 v, 8 ma i l 110 ma 1 04 25 mv v diff = 5.0 v, 1 25 8 ma i l 1.5 a 2,3 45 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 17 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max case m, n, t, u, y, z - continued. thermal regulation v rth v in = -14.6 v, i l = 1.5 a, p d = 20 watts, t = 10 ms, t a = +25 c 1 04 5 mv ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref 4,5,6 04 66 db adjustment pin current i adj-1 v diff = 3.0 v 1,2,3 04 100 a i adj-2 v diff = 40 v 1,2,3 100 i adj-3 v diff = 50 v 1,2,3 100 adjustment pin current change ? i adj v diff = 5.0 v, 8 ma i out 1.5 a 1,2,3 04 5 a i l = 8 ma, 3.0 v v diff 50 v 1,2,3 6 minimum load current i lmin v diff = 3.0 v, v out = -1.4 v (forced) 1,2,3 04 3 ma v diff = 10 v, v out = -1.4 v (forced) 1,2,3 3 v diff = 40 v, v out = -1.4 v (forced) 1,2,3 5 v diff = 50 v, v out = -1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 5 v 1,2,3 04 1.5 3.5 a v diff = 50 v 1 0.2 1.0 cases x, 2, 5, and 6 reference voltage v ref v diff = 3.0 v 1 05 1.238 1.262 v v diff = 3.3 v 2,3 1.225 1.270 v diff = 40 v 1,2,3 1.225 1.270 see footnotes at the end table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 18 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases x, 2, 5, and 6 - continued. line regulation r line v out = v ref , 3.0 v v diff 40 v 1 05 4.5 mv v out = v ref , 3.3 v v diff 40 v 2,3 9 load regulation 1 / r load v diff = 3 v, 10 ma i l 500 ma 1 05 15 mv v diff = 3.3 v, 10 ma i l 500 ma 2,3 15 v diff = 40 v, 10 ma i l 150 ma 1 15 v diff = 40 v, 10 ma i l 100 ma 2,3 15 thermal regulation v rth v in = +14.6 v, i l = 300 ma, p d = 4 watts, t = 20 ms, t a = +25 c 1 05 2 mv ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref 4,5,6 05 66 db adjustment pin current i adj v diff = 3.0 v 1 05 100 a v diff = 3.3 v 2,3 100 v diff = 40 v 1,2,3 100 adjustment pin current change ? i adj v diff = 3 v, 10 ma i l 500 ma 1 05 5 a v diff = 3.3 v, 10 ma i l 500 ma 2,3 5 v diff = 40 v, 10 ma i l 150 ma 1 5 v diff = 40 v, 10 ma i l 100 ma 2,3 5 3.0 v v diff 40 v 1 5 3.3 v v diff 40 v 2,3 5 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 19 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases x, 2, 5, and 6 - continued. minimum load current i lmin v diff = 3.0 v, v out = 1.4 v (forced) 1 05 5 ma v diff = 3.3 v, v out = 1.4 v (forced) 2,3 5 v diff = 40 v, v out = 1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 15 v 1,2,3 05 0.5 1.65 a v diff = 40 v 1 0.15 0.65 cases m, n, t, u, y, z reference voltage v ref v diff = 3.0 v 1 05 1.238 1.262 v v diff = 3.3 v 2,3 1.225 1.270 v diff = 40 v 1,2,3 1.225 1.270 line regulation r line v out = v ref , 3.0 v v diff 40 v 1 05 4.5 mv v out = v ref , 3.3 v v diff 40 v 2,3 9 load regulation 1 / r load v diff = 3 v, 10 ma i l 1.5 a 1 05 15 mv v diff = 3.3 v, 10 ma i l 1.5 a 2,3 15 v diff = 40 v, 10 ma i l 300 ma 1 15 v diff = 40 v, 10 ma i l 195 ma 2,3 15 thermal regulation v rth v in = +14.6 v, i l = 1.5 a, p d = 20 watts, t = 20 ms, t a = +25 c 1 05 5 mv see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 20 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases m, n, t, u, y, z - continued. ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref 4,5,6 05 66 db adjustment pin current i adj v diff = 3.0 v 1 05 100 a v diff = 3.3 v 2,3 100 v diff = 40 v 1,2,3 100 adjustment pin current change ? i adj v diff = 3 v, 10 ma i l 1.5 a 1 05 5 a v diff = 3.3 v, 10 ma i l 1.5 a 2,3 5 v diff = 40 v, 10 ma i l 300 ma 1 5 v diff = 40 v, 10 ma i l 195 ma 2,3 5 3.0 v v diff 40 v 1 5 3.3 v v diff 40 v 2,3 5 minimum load current i lmin v diff = 3.0 v, v out = 1.4 v (forced) 1 05 5 ma v diff = 3.3 v, v out = 1.4 v (forced) 2,3 5 v diff = 40 v, v out = 1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 15 v 1,2,3 05 1.50 3.50 a v diff = 40 v 1 0.18 1.5 cases x, 2, 5, and 6 reference voltage v ref v diff = 3.0 v 1 06 -1.262 -1.238 v 2,3 -1.280 -1.220 v diff = 40 v 1,2,3 -1.280 -1.220 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 21 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases x, 2, 5, and 6 - continued. line regulation r line 3.0 v v diff 40 v 1 06 4.5 mv 2,3 13.8 load regulation 1 / r load v diff = 5 v, 8 ma i l 200 ma 1,2,3 06 25 mv v diff = 15 v, 8 ma i l 200 ma 1,2,3 25 v diff = 40 v, 8 ma i l 150 ma 1 25 v diff = 40 v, 8 ma i l 50 ma 2,3 50 thermal regulation v rth v in = -16.25 v, i l = 330 ma, t a = +25 c p d = 5 watts, t = 10 ms 1 06 2 mv ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref 4,5,6 06 66 db adjustment pin current i adj v diff = 3.0 v 1,2,3, 06 100 a v diff = 40 v 1,2,3 100 adjustment pin current change ? i adj (line) 3.0 v v diff 40 v 1,2,3 06 5 a ? i adj (load) v diff = 5.0 v, 8 ma i l 500 ma 1,2,3 5 minimum load current i lmin v diff = 3.0 v, v out = -1.4 v (forced) 1,2,3 06 3 ma v diff = 10 v, v out = -1.4 v (forced) 1,2,3 3 v diff = 40 v, v out = -1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 5 v, t a = +25 c 1 06 0.5 1.8 a v diff = 40 v, t a = +25 c 1 0.15 0.65 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 22 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases m, n, t, u, y, z reference voltage v ref v diff = 3.0 v 1 06 -1.262 -1.238 v 2,3 -1.280 -1.220 v diff = 40 v 1,2,3 -1.280 -1.220 line regulation r line 3.0 v v diff 40 v 1 06 4.5 mv 2,3 13.8 load regulation 1 / r load v diff = 5 v, 8 ma i l 1.5 a 1,2,3 06 25 mv v diff = 12 v, 8 ma i l 1.5 a 1 25 v diff = 40 v, 8 ma i l 200 ma 1 25 v diff = 40 v, 8 ma i l 100 ma 2,3 50 thermal regulation v rth v ih = -14.6 v, i l = 1.5 a, p d = 20 watts, t = 10 ms, t a = +25 c 1 06 5 mv ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref 4,5,6 06 66 db adjustment pin current i adj v diff = 3.0 v 1,2,3, 06 100 a v diff = 40 v 1,2,3 100 adjustment pin current change ? i adj (line) 3.0 v v diff 40 v 1,2,3 06 5 a ? i adj (load) v diff = 5.0 v, 8 ma i l 1.5 a 1,2,3 5 minimum load current i lmin v diff = 3.0 v, v out = -1.4 v (forced) 1,2,3 06 3 ma v diff = 10 v, v out = -1.4 v (forced) 1,2,3 3 v diff = 40 v, v out = -1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 5 v 1,2,3 06 1.5 3.5 a v diff = 40 v, t a = +25 c 1 0.24 1.2 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 23 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases x, 2, 5, and 6 reference voltage v ref v diff = 3.0 v 1 07 1.238 1.262 v v diff = 3.3 v 2,3 1.225 1.27 v diff = 40 v 1,2,3 1.225 1.27 v diff = 60 v 1,2,3 1.225 1.27 line regulation 3 / r line v out = v ref 1 07 4.5 mv 3.0 v v diff 40 v v out = v ref 2,3 9 3.3 v v diff 40 v v out = v ref 1 2.5 40 v v diff 60 v 2,3 4.0 load regulation 1 / r load v diff = 3 v, 10 ma i l 500 ma 1 07 15 mv v diff = 3.3 v, 10 ma i l 500 ma 2,3 15 v diff = 40 v, 10 ma i l 150 ma 1 15 v diff = 40 v, 10 ma i l 100 ma 2,3 15 v diff = 60 v, 10 ma i l 20 ma 1,2,3 15 thermal regulation v rth v in = 14.6 v, i l = 300 ma, p d = 4 watts, t = 20 ms, t a = +25 c 1 07 2 mv ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref , i out = 100 ma 4,5,6 07 66 db adjustment pin current i adj v diff = 3.0 v 1 07 100 a v diff = 3.3 v 2,3 100 v diff = 40 v 1,2,3 100 v diff = 60 v 1,2,3 100 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 24 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases x, 2, 5, and 6 - continued. adjustment pin current change ? i adj v diff = 3 v, 10 ma i l 500 ma 1 07 5 a v diff = 3.3 v, 10 ma i l 500 ma 2,3 5 v diff = 40 v, 10 ma i l 150 ma 1 5 v diff = 40 v, 10 ma i l 100 ma 2,3 5 3.0 v v diff 40 v 1 5 3.3 v v diff 40 v 2,3 5 3.3 v v diff 60 v 1,2,3 5 minimum load current i lmin v diff = 3.0 v, v out = 1.4 v (forced) 1 07 5 ma v diff = 3.3 v, v out = 1.4 v (forced) 2,3 5 v diff = 40 v, v out = 1.4 v (forced) 1,2,3 5 v diff = 60 v, v out = 1.4 v (forced) 1,2,3 7 current limit 2 / i cl v diff = 5 v 1,2,3 07 0.50 1.65 a v diff = 40 v 1 0.15 0.65 v diff = 60 v 1 0.02 0.28 cases m, n, t, u, y, z, 4 4 / 5 / reference voltage v ref v diff = 3.0 v 1 07 1.238 1.262 v m,d,p,l,r 1 1.238 1.262 v diff = 3.3 v 2,3 1.225 1.27 v diff = 40 v 1,2,3 1.225 1.27 m,d,p,l,r 1 1.225 1.27 v diff = 60 v 1,2,3 1.225 1.27 m,d,p,l,r 1 1.225 1.27 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 25 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases m, n, t, u, y, z, 4 ? continued 4 / 5 / line regulation 3 / r line v out = v ref 1 07 4.5 mv 3.0 v v diff 40 v m,d,p,l,r 1 4.5 v out = v ref 2,3 9 3.3 v v diff 40 v v out = v ref 1 5 40 v v diff 60 v 2,3 10 m,d,p,l,r 1 5 load regulation 1 / r load v diff = 3 v, 10 ma i l 1.5 a 1 07 15 mv m,d,p,l,r 1 15 v diff = 3.3 v, 10 ma i l 1.5 a 2,3 15 v diff = 40 v, 10 ma i l 300 ma 1 15 m,d,p,l,r 1 15 v diff = 40 v, 10 ma i l 195 ma 2,3 15 v diff = 60 v, 10 ma i l 30 ma 1,2,3 15 m,d,p,l,r 1 15 thermal regulation v rth v in = 14.6 v, i l = 1.5 a, p d = 20 watts, t = 20 ms, t a = +25 c 1 07 5 mv m,d,p,l,r 1 5 ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref , i out = 100 ma 4,5,6 07 66 db adjustment pin current i adj v diff = 3.0 v 1 07 100 a m,d,p,l,r 1 100 v diff = 3.3 v 2,3 100 v diff = 40 v 1,2,3 100 m,d,p,l,r 1 100 v diff = 60 v 1,2,3 100 m,d,p,l,r 1 100 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 26 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases m, n, t, u, y, z, 4 ? continued 4 / 5 / adjustment pin current change ? i adj v diff = 3 v, 10 ma i l 1.5 a 1 07 5 a m,d,p,l,r 1 5 v diff = 3.3 v, 10 ma i l 1.5 a 2,3 5 v diff = 40 v, 10 ma i l 300 ma 1 5 m,d,p,l,r 1 5 v diff = 40 v, 10 ma i l 195 ma 2,3 5 3.0 v v diff 40 v 1 5 m,d,p,l,r 1 5 3.3 v v diff 40 v 2,3 5 3.3 v v diff 60 v 1,2,3 5 m,d,p,l,r 1 5 minimum load current i lmin v diff = 3.0 v, v out = 1.4 v (forced) 1 07 5 ma m,d,p,l,r 1 5 v diff = 3.3 v, v out = 1.4 v (forced) 2,3 5 v diff = 40 v, v out = 1.4 v (forced) 1,2,3 5 m,d,p,l,r 1 5 v diff = 60 v, v out = 1.4 v (forced) 1,2,3 7 m,d,p,l,r 1 7 current limit 2 / i cl v diff = 5 v 1,2,3 07 1.50 3.5 a m,d,p,l,r 1 1.50 3.5 v diff = 40 v 1 0.3 1.5 m,d,p,l,r 1 0.3 1.5 v diff = 60 v 1 0.05 0.50 m,d,p,l,r 1 0.05 0.50 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 27 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases x, 2, 5, and 6 reference voltage v ref v diff = 3.0 v 1 08 -1.262 -1.235 v 2,3 -1.28 -1.22 v diff = 40 v 1 -1.28 -1.22 2,3 -1.28 -1.22 v diff = 50 v 1 -1.28 -1.22 2,3 -1.28 -1.22 line regulation r line 3.0 v v diff 50 v 1 08 10 mv 2,3 25 load regulation 1 / r load v diff = 50 v, 8 ma i l 100 ma 1 08 25 mv v diff = 5.0 v, 1 31 8 ma i l 500 ma 2,3 50 thermal regulation v rth v in = -16.25 v, i l = 330 ma, t a = +25 c, p d = 5 watts, t = 10 ms 1 08 2 mv ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref 4,5,6 08 66 db adjustment pin current i adj-1 v diff = 3.0 v 1,2,3 08 100 a i adj-2 v diff = 40 v 1,2,3 100 i adj-3 v diff = 50 v 1,2,3 100 adjustment pin current change ? i adj v diff = 5 v, 8 ma i out 200 ma 1,2,3 08 5 a i l = 8 ma, 3.0 v v diff 50 v 1,2,3 6 minimum load current i lmin v diff = 3.0 v, v out = -1.4 v (forced) 1,2,3 08 3 ma v diff = 10 v, v out = -1.4 v (forced) 1,2,3 3 v diff = 40 v, v out = -1.4 v (forced) 1,2,3 5 v diff = 50 v, v out = -1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 5 v 1,2,3 08 0.5 1.8 a v diff = 50 v 1 0.1 0.65 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 28 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. test symbol conditions -55 c t a +125 c i l = 8 ma group a subgroups device type limits unit unless otherwise specified min max cases m, n, t, u, y, z reference voltage v ref v diff = 3.0 v 1 08 -1.262 -1.238 v 2,3 -1.28 -1.22 v diff = 50 v 1 -1.28 -1.22 2,3 -1.28 -1.22 line regulation r line 3.0 v v diff 50 v 1 08 6 mv 2,3 20 load regulation 1 / r load v diff = 50 v, 8 ma i l 110 ma 1 08 25 mv v diff = 5.0 v, 1 25 8 ma i l 1.5 a 2,3 50 thermal regulation v rth v in = -14.6 v, i l = 1.5 a, p d = 20 watts, t = 10 ms, t a = +25 c 1 08 5 mv ripple rejection 2 / r n f = 120 hz, c adj = 10 f, v out = v ref 4,5,6 08 66 db adjustment pin current i adj-1 v diff = 3.0 v 1,2,3 08 100 a i adj-2 v diff = 40 v 1,2,3 100 i adj-3 v diff = 50 v 1,2,3 100 adjustment pin current change ? i adj v diff = 5 v, 8 ma i out 1.5 a 1,2,3 08 5 a i l = 8 ma, 3.0 v v diff 50 v 1,2,3 6 minimum load current i lmin v diff = 3.0 v, v out = -1.4 v (forced) 1,2,3 08 3 ma v diff = 10 v, v out = -1.4 v (forced) 1,2,3 3 v diff = 40 v, v out = -1.4 v (forced) 1,2,3 5 v diff = 50 v, v out = -1.4 v (forced) 1,2,3 5 current limit 2 / i cl v diff = 5 v 1,2,3 08 1.5 3.5 a v diff = 50 v 1 0.2 1.0 see footnotes at end of table. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 29 dscc form 2234 apr 97 table i. electrical performance characteristics - continued. 1 / regulation is measured at a constant junction temperature, using pulse test ing with a low duty cycle. changes in output voltage due to heating effects are covered under the specific ation for thermal regulation. with exception of cases u, 2, and 4, all output m easurements are referenced to the case. m easurements taken at t he output lead must be adjusted for lead resistance. 2 / if not tested, shall be guaranteed to t he specified limits in table herein. 3 / to determine the line regulation limits for 3.0 v < v diff < 60 v (or 3.3 v v diff 60 v) add the limits for 3.0 v < v diff < 40 v (or 3.3 v v diff 40 v) to the limits for 40 v < v diff < 60 v. 4 / device types 02 and 07 with case outline u supplied to this drawing have been characterized thr ough all levels m, d, p, l, and r of irradiation. however, these devices are only tested at the ?r? level. pre and post irradiation values are ident ical unless otherwise specified in table i. when performing pos t irradiation electrical measurements for any rha level, t a = +25 c. 5 / these parts may be dose rate sensitive in a spac e environment and demonstrate enhanced low dose rate effect. radiation end point limits for t he noted parameters are guaranteed only for the conditions as specified in mil-std-883, method 1019 condition a. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 30 dscc form 2234 apr 97 case outline m device types all terminal number terminal symbol 1 v out 2 adjust 3 v in case isolated symbol inches millimeters min max min max a .160 --- 4.06 --- a 2 .080 --- 2.03 --- b --- .035 --- 0.89 c .020 --- 0.51 --- d --- .425 --- 10.8 e --- .425 --- 10.8 e .200 bsc 5.08 bsc e 1 .100 bsc 2.54 bsc l .350 --- 8.89 --- l 1 --- .135 --- 3.43 notes: 1. dimensions shall be measured in inches. 2. metric equivalents are given for general information only. 3. three leads. figure 1. case outlines and terminal connections . standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 31 dscc form 2234 apr 97 case outline n device types 01, 02, 05, 07 03, 04, 06, 08 case outline n terminal number terminal symbol 1 adjust adjust 2 input output 3 output input symbol inches millimeters min max min max a .130 .150 3.30 3.81 a1 .010 .020 0.25 0.51 b .370 .380 9.40 9.65 b1 .410 .420 10.41 10.67 b2 .135 .145 3.43 3.68 b3 .152 .162 3.86 4.11 d .620 .630 15.75 16.00 e .445 .455 11.30 11.55 e .030 --- 0.76 --- s .045 .055 1.14 1.40 s1 .035 .045 0.89 1.14 note: the u.s. government preferred sy stem of measurement is the metric si system. however, since this item was originally designed using inch-pound units of meas urement, in the event of c onflict between the metric and inch-pound units, the inch-pound units shall take precedence. figure 1. case outlines and terminal connections ? continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 32 dscc form 2234 apr 97 case outlines t and u device types 01, 02, 05, 07 01, 02, 05, 07 03, 04, 06, 08 case outlines t u t u terminal number terminal symbol 1 adjust adjust adjust adjust 2 v out v out v in v in 3 v in v in v out v out 4 v out nc v in nc figure 1. case outlines and terminal connections - continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 33 dscc form 2234 apr 97 case outlines t and u symbol inches millimeters min max min max a .190 .200 4.83 5.08 a 1 .035 .045 0.89 1.14 a 2 .120 bsc 3.05 bsc b .025 .035 0.64 0.89 d .645 .665 16.38 16.89 d 1 .410 .430 10.41 10.92 d 3 .000 .065 0.00 1.65 e .100 bsc 2.54 bsc e .410 .422 10.41 10.71 l .500 .750 12.70 19.05 o .527 .537 13.39 13.64 p .140 .150 3.56 3.81 notes: 1. dimensions shall be measured in inches. 2. metric equivalents are given for general information only. 3. for case outlines t and u only, cage 34333, the ceramic seal that protrudes from t he seating plane is not to be considered in overall package dimensions. the ce ramic seal protrusion is considered uncontrolled within an area 30 mils fr om the seating plane. figure 1. case outlines and terminal connections - continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 34 dscc form 2234 apr 97 case outline x device types 01, 02, 05, and 07 device types 03, 04, 06, and 08 bottom view bottom view figure 1. case outlines and terminal connections - continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 35 dscc form 2234 apr 97 case outline x symbol inches millimeters notes min max min max a .165 .195 4.19 4.95 a 1 .100 --- 2.54 --- 7 b .016 .019 0.41 0.48 3 b 1 .016 .021 0.41 0.53 3 d .335 .370 8.51 9.40 d 1 .305 .335 7.75 8.51 e .200 bsc 5.08 bsc 5 e 1 .100 bsc 2.54 bsc 5 f --- .050 --- 1.27 k .028 .034 0.71 0.86 k 1 .029 .045 0.74 1.14 4 k 2 .009 .041 0.23 1.04 l .500 --- 12.70 --- l 1 --- .050 --- 1.27 l 2 .250 --- 6.35 --- 45 t.p. 45 t.p. 5 notes: 1. dimensions shall be measured in inches. 2. metric equivalents are given for general information only. 3. b applies between l 1 and beyond .500 inch (12.70 mm) fr om the seating plane (two leads). diameter is uncontrolled in l 1 and beyond .500 inch (12. 70 mm) from the seating plane. 4. two leads. 5. two holes. 6. two holes located at true position within diameter .010 inch (0.25 mm). 7. leads having a maximum diameter of . 043 inch (1.09 mm) measured in gauging plane .054 inch (1.37 mm) .001 (0.03 mm) .000 inch (0.00 mm) below the seating plane shall be located at true position within diameter .014 inch (0.36 mm). 8. the mounting surface of the header shall be flat to convex within .003 inch (0.08 mm) inside a .930 inch (23.62 mm) diameter circle on the c enter of the header and flat to convex within .006 inch (0.15 mm) overall. figure 1. case outlines and terminal connections ? continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 36 dscc form 2234 apr 97 case outline y device types 01, 02, 05, and 07 device types 03, 04, 06, and 08 bottom view bottom view figure 1. case outlines and terminal connections ? continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 37 dscc form 2234 apr 97 case outline z device types 03, 04, 06, and 08 device types 01, 02, 05, and 07 botto m view bottom view figure 1. case outlines and terminal connections ? continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 38 dscc form 2234 apr 97 case outline 4 device type 07 terminal number terminal symbol 1 adjust 2 v out 3 v in symbol inches millimeters min max min max a .190 .210 4.83 5.33 b --- .030 --- 0.76 d .410 .430 10.41 10.92 d1 .580 .610 14.73 15.49 e --- .100 --- 2.54 e1 --- .200 --- 5.08 e .410 .420 10.41 10.67 l1 .090 .110 2.29 2.79 l .115 .125 2.92 3.18 n 3 3 note: the u.s. government preferred sy stem of measurement is the metric si system. however, since this item was originally designed using inch-pound units of meas urement, in the event of c onflict between the metric and inch-pound units, the inch-pound units shall take precedence. figure 1. case outlines and terminal connections ? continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 39 dscc form 2234 apr 97 case outline 5 device types 01, 02, 05, 07 notes: 1. dimensions are in inches. metric equivalents are given for information only. 2. pins 4, 5 - adjust pins 6, 7, 8, 9, 10, 11, 12, 13 - v in pins 1, 2, 15, 16, 17, 18 - v out pins 3, 14 - no connect figure 1. case outlines and terminal connections ? continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 40 dscc form 2234 apr 97 case outline 6 device types 03, 04, 06, 08 notes: 1. dimensions are in inches. metric equivalents are given for information only. 2. pins 4, 5 - adjust pins 6, 7, 8, 9, 10, 11, 12, 13 - v out pins 1, 2, 15, 16, 17, 18 - v in pins 3, 14 - no connect figure 1. case outlines and terminal connections ? continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 41 dscc form 2234 apr 97 case outlines 5 and 6 inches millimeters symbol min max min max a .095 .115 2.42 2.92 b .020 .030 0.51 0.76 d .280 .295 7.12 7.49 d1 .025 bsc 0.635 bsc e .345 .360 8.77 9.14 e1 .008 bsc 0.203 bsc e .050 bsc 1.27 bsc l1 .040 .055 1.02 1.39 l2 .055 .065 1.40 1.65 q1 .070 .080 1.78 2.03 q2 .120 .130 3.05 3.30 q3 .045 .055 1.15 1.39 s1 .105 ref 2.67 ref s2 .120 ref 3.05 ref figure 1. case outlines and terminal connections ? continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 42 dscc form 2234 apr 97 device types 01, 05 02, 07 03, 06 04, 08 case outline 2 terminal number terminal symbol 1 v out sense (see note) nc v out v in 2 nc nc v out sense (see note) nc 3 nc nc nc nc 4 nc nc nc nc 5 v in nc nc nc 6 nc nc nc nc 7 nc nc nc nc 8 nc nc nc nc 9 nc nc nc adjust 10 adjust nc nc nc 11 nc v in v in nc 12 nc v out nc v out 13 nc v out nc v out 14 nc v out sense (see note) nc nc 15 nc nc nc nc 16 nc nc adjust nc 17 nc nc nc nc 18 nc adjust nc nc 19 nc nc nc nc 20 v out v in nc v in note: for normal operation, the v out sense pin must be connected externally to the load. figure 1. case outlines and terminal connections ? continued. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 43 dscc form 2234 apr 97 4. verification 4.1 sampling and inspection . for device classes q and v, sampling and inspection procedures shall be in accordance with mil-prf-38535 or as modified in the devic e manufacturer's quality m anagement (qm) plan. the modification in the qm plan shall not affect the form, fit, or functi on as described herein. for device class m, sampling and inspection procedures shall be in accordance with mil-prf-38535, appendix a. 4.2 screening . for device classes q and v, screening shall be in accordance with mil-prf- 38535, and shall be conducted on all devices prior to qualification and technology conformance inspection. fo r device class m, screening shall be in accordance with method 5004 of mil-std-883, and shall be conducted on all devices prio r to quality conformance inspection. 4.2.1 additional criteria for device class m . a. burn-in test, method 1015 of mil-std-883. (1) test condition a, b, c, or d. the test circuit shall be maintained by the manuf acturer under document revision level control and shall be made available to the preparing or acquiring activity upon request. the test circuit shall specify the inputs, output s, biases, and power dissipation, as applicable, in accordance with the intent specified in method 1015. (2) t a = +125 c, minimum. b. interim and final electrical test parameters shall be as spec ified in table iia herein. 4.2.2 additional criteria for device classes q and v . a. the burn-in test duration, test condi tion and test temperature, or approved alte rnatives shall be as specified in the device manufacturer's qm plan in accordance with mil-prf- 38535. the burn-in test circuit shall be maintained under document revision level control of the device manufacturer's technology review board (trb) in accordance with mil-prf-38535 and shall be made available to the acquiring or preparing activity upon request. the test circuit shall specify the inputs, output s, biases, and power dissipation, as applicable, in accordance with the intent specified in method 1015 of mil-std-883. b. interim and final electrical test parameter s shall be as specified in table iia herein. c. additional screening for device class v beyond the require ments of device class q shall be as specified in mil-prf-38535, appendix b. 4.3 qualification inspecti on for device classes q and v . qualification inspection for device classes q and v shall be in accordance with mil-prf-38535. inspections to be performed shall be those specified in mil-prf-38535 and herein for groups a, b, c, d, and e inspecti ons (see 4.4.1 through 4.4.4). 4.4 conformance inspection . technology conformance inspection for classes q and v shall be in accordance with mil-prf-38535 including groups a, b, c, d, and e inspections and as specified. q uality conformance inspection for device class m shall be in accordance with mil-prf-38535, appendix a and as specified herein. inspections to be performed for device class m shall be those specified in method 5005 of mil-std-883 and herein for groups a, b, c, d, and e inspections (see 4.4.1 through 4.4.4). 4.4.1 group a inspection . a. tests shall be as specif ied in table iia herein. b. subgroups 7, 8, 9, 10, and 11 in table i, method 5005 of mil-std-883 shall be omitted. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 44 dscc form 2234 apr 97 table iia. electrical test requirements . test requirements subgroups (in accordance with mil-std-883, method 5005, table i) subgroups (in accordance with mil-prf-38535, table iii) device class m device class q device class v interim electrical parameters (see 4.2) --- --- --- final electrical parameters (see 4.2) 1,2,3,4,5,6 1 / 2 / 1,2,3,4,5,6 1 / 2 / 1,2,3,4,5,6 1 / 2 / group a test requirements (see 4.4) 1,2,3 1,2,3 1,2,3 group c end-point electrical parameters (see 4.4) 1 1 1,2,3 3 / group d end-point electrical parameters (see 4.4) 1 1 1,2,3 group e end-point electrical parameters (see 4.4) 1 1 1 1 / pda applies to subgroup 1. 2 / subgroups 4, 5, and 6, if not tested, sha ll be guaranteed to the limits specified in table i. 3 / delta limits as specified in table iib shall be required where specified and the delta limits shall be computed with reference to t he previous end-point el ectrical parameter table iib. group c delta limits at +25 c . test device type case outline limit unit min max v ref 03,04 x, y 0.01 v r line 03,04 x, y 4 mv i adj 03 x, y 10 a 04 x, y 10 4.4.2 group c inspection . the group c inspection end-point electrical paramet ers shall be as specified in table iia herein. 4.4.2.1 additional criteria for device class m . steady-state life test condi tions, method 1005 of mil-std-883: a. test condition a, b, c, or d. the test circuit s hall be maintained by the manufactu rer under document revision level control and shall be made available to the preparing or acquiring activity upon request. the test circuit shall specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance wi th the intent specif ied in method 1005 of mil-std-883. b. t a = +125 c, minimum. c. test duration: 1,000 hours, except as permitted by method 1005 of mil-std-883. 4.4.2.2 additional criteria for device classes q and v . the steady-state life test duration, test condition and test temperature, or approved alternatives shall be as spec ified in the device manufacturer's qm pl an in accordance with mil-prf-38535. the test circuit shall be maintained under document revision level c ontrol by the device manufacturer's trb in accordance with mil-prf-38535 and shall be made available to the acquiring or preparing activity upon r equest. the test circuit shall specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in test method 1005 of m il- std-883. standard microcircuit drawing size a 77034 defense supply center columbus columbus, ohio 43218-3990 revision level x sheet 45 dscc form 2234 apr 97 4.4.3 group d inspection . the group d inspection end-point electrical paramet ers shall be as specified in table iia herein. 4.4.4 group e inspection . group e inspection is required only for par ts intended to be marked as radiation hardness assured (see 3.5 herein). rha levels for device classes m, q, and v shall be as specified in mil-prf-38535. end-point parameters shall be as specif ied in table iia herein. 4.4.4.1 total dose i rradiation testing . total dose irradiation testing shall be performed in accordance with mil-std-883 method 1019, condition a and as specified herein. 5. packaging 5.1 packaging requirements . the requirements for packaging shall be in accordance with mil-prf-38535 for device classes q and v or mil-prf-38535, appendix a for device class m. 6. notes 6.1 intended use . microcircuits conforming to this drawing are int ended for use for government microcircuit applications (original equipment), design applic ations, and logistics purposes. 6.1.1 replaceability . microcircuits covered by this drawing will repl ace the same generic device covered by a contractor- prepared specificati on or drawing. 6.2 configuration control of smd's . all proposed changes to existing smd's will be coordinated with the users of record for the individual documents. this c oordination will be accomplished using dd form 1692, engineering change proposal. 6.3 record of users . military and industrial users should inform defens e supply center columbus (dscc) when a system application requires configuration control and which smd's are applicabl e to that system. dscc will maintain a record of users and this list will be used for coordination and distribution of changes to the drawings. users of drawings covering microelect ronic devices (fsc 5962) should contac t dscc-va, telephone (614) 692-0544. 6.4 comments . comments on this drawing should be directed to dscc-va, columbus, ohio 43218-3990, or telephone (614) 692-0547. 6.5 abbreviations, symbols, and definitions . the abbreviations, symbols, and defin itions used herein are defined in mil-prf-38535 and mil-hdbk-1331. 6.6 sources of supply . 6.6.1 sources of supply for device classes q and v . sources of supply for device classes q and v are listed in qml-38535. the vendors listed in qml-38535 have submi tted a certificate of co mpliance (see 3.6 herein) to dscc-va and have agreed to this drawing. 6.6.2 approved sources of supply for device class m . approved sources of supply for cl ass m are listed in mil-hdbk-103. the vendors listed in mil-hdbk-103 have agr eed to this drawing and a certificate of compliance (see 3.6 herein) has been submitted to and accepted by dscc-va. standard microcircuit drawing bulletin date: 06-01-30 approved sources of supply for smd 77034 are listed below for immediate acquisition information only and shall be added to mil-hdbk-103 and qml-38535 during the next revisi on. mil-hdbk-103 and qml-38535 will be revised to include the addition or deletion of source s. the vendors listed below have agreed to this drawing and a certificate of compliance has been submitted to and a ccepted by dscc-va. this informati on bulletin is superseded by the next dated revision of mil-hdbk-103 and qml- 38535. dscc maintains an online databas e of all current sources of supply at http://www.d scc.dla.mil/programs/smcr/ . standard microcircuit drawing pin 1 / vendor cage number vendor similar pin 2 / reference military specification pin 7703401ma 21845 sdp117mmd 69210 om1320smm 7703401na 21845 sdp117nmd 69210 om1320nmm 7703401ta u3158 ip117g-desc 21845 sdp117tmd 69210 om1320ntm 34333 sg117g/883b 7703401ua u3158 ip117ig-desc 21845 sdp117umd 3 / fm117s7/883 34333 sg117ig/883b 69210 om1320stm 7703401xa u3158 ip117mh-desc m38510/11703bxx 3 / lm117h/883b 34333 sg117t/883b 3 / lm117h/883b 21845 sdp117xmd 7703401ya u3158 ip117k-desc m38510/11704byx 3 / lm117k/883 34333 sg117k/883b 3 / lm117k/883b 69210 om1320nkm 21845 sdp117ymd 7703401za u3158 ip117r-desc 34333 sg117r/883b 77034012a 3 / uc117l/883bc 21845 sdp1172md 34333 sg117l/883b 69210 om1320n2m 77034015a u3158 ip117e 7703402ma 21845 sdp117hvmmd 69210 om1321smm 7703402na 21845 sdp117hvnmd 69210 om1321nmm 7703402ta u3158 ip117hvg-desc 21845 sdp117hvtmd 69210 om1321stm 7703402ua u3158 ip117hvig-desc 21845 sdp117hvumd 3 / fm117hvs7/883 69210 om1321ntm 7703402xa u3158 ip117mhvh-desc 3 / lm117hvh/883b 69210 om1321nhm 21845 sdp117hvxmd see footnotes at end of table. 1 of 5 standard microcircuit drawi ng bulletin - continued standard microcircuit drawing pin 1 / vendor cage number vendor similar pin 2 / reference military specification pin 7703402ya u3158 ip117hvk-desc 3 / lm117hvk/883 3 / lm117hvk/883b 69210 om1321nkm 21845 sdp117hvymd 7703402za u3158 ip117hvr-desc 77034022a 21845 sdp117hv2md 69210 om1321n2m 77034025a u3158 ip117hve 7703403ma 21845 sdp137mmd 69210 om1322smm 7703403na 21845 sdp137nmd 69210 om1322nmm 7703403ta u3158 ip137g-desc 21845 sdp137tmd 69210 om1322ntm 7703403ua u3158 ip137ig-desc 21845 sdp137umd 3 / fm137s7/883 3 / sg137ig/883b 69210 om1322stm 7703403xa u3158 ip137mh-desc m38510/11803bxx 27014 lm137h/883b 34333 sg137t/883b 3 / lm137h/883b 21845 sdp137xmd 7703403ya u3158 ip137k-desc m38510/11804byx 27014 lm137k/883b 3 / sg137k/883b 3 / lm137k-883b 69210 om1322nkm 21845 sdp137ymd 7703403za u3158 ip137r-desc 3 / sg137r/883b 77034032a 21845 sdp1372md 34333 sg137l/883b 69210 om1322n2m 77034036a u3158 ip137e 7703404ma 21845 sdp137hvmmd 69210 om1323smm 7703404na 21845 sdp137hvnmd 69210 om1323nmm 7703404ta u3158 ip137hvg-desc 21845 sdp137hvtmd 69210 om1323ntm 7703404ua u3158 ip137hvig-desc 21845 sdp137hvumd 3 / fm137hv/883 69210 om1323stm 7703404xa u3158 ip137hvh-desc 27014 lm137hvh/883 3 / lm137hvh/883 21845 sdp137hvxmd 7703404ya u3158 ip137hvk-desc 27014 lm137hvk/883 3 / lm137hvk/883b 69210 om1323nkm 21845 sdp137hvymd see footnotes at end of table. 2 of 5 standard microcircuit drawi ng bulletin - continued standard microcircuit drawing pin 1 / vendor cage number vendor similar pin 2 / reference military specification pin 7703404za u3158 ip137hvr-desc 77034042a 21845 sdp137hv2md 69210 om1323n2m 77034046a u3158 ip137hve 7703405ma 3 / sdp117ammd 69210 om1324smm 7703405na 3 / sdp117anmd 69210 om1324nmm 7703405ta u3158 ip117ag-desc 3 / sdp117atmd 69210 om1324ntm 34333 sg117ag/883b 7703405ua u3158 ip117aig-desc 3 / sdp117aumd 3 / fm117as7 34333 sg117aig/883b 69210 om1324stm 7703405xa u3158 ip117mah-desc 34333 sg117at/883b 3 / lt117ah/883b 3 / sdp117axmd 7703405ya u3158 ip117ak-desc 34333 sg117ak/883b 3 / lt117ak/883b 69210 om1324nkm 3 / sdp117aymd 7703405za u3158 ip117ar-desc 34333 sg117ar/883b 77034052a 3 / uc117al/883bc 3 / sdp117a2md 34333 sg117al/883b 69210 om1324n2m 77034055a u3158 ip117ae 7703406ma 21845 sdp137ammd 69210 om1325smm 7703406na 21845 sdp137anmd 69210 om1325nmm 7703406ta u3158 ip137ag-desc 21845 sdp137atmd 69210 om1325ntm 7703406ua u3158 ip137aig-desc 21845 sdp137aumd 3 / fm137as7 3 / sg137aig/883b 69210 om1325stm 7703406xa u3158 ip137ah-desc 34333 sg137at/883b 3 / lt137ah/883b 21845 sdp137axmd 7703406ya u3158 ip137ak-desc 3 / sg137ak/883b 3 / lt137ak/883b 69210 om1325nkm 21845 sdp137aymd see footnotes at end of table. 3 of 5 standard microcircuit drawi ng bulletin - continued standard microcircuit drawing pin 1 / vendor cage number vendor similar pin 2 / reference military specification pin 7703406za u3158 ip137ar-desc 3 / sg137ar/883b 77034062a 21845 sdp137a2md 34333 sg137al/883b 69210 om1325n2m 77034066a u3158 ip137ae 7703407ma 3 / sdp117ahvmmd 69210 om1326smm 7703407na 3 / sdp117ahvnmd 69210 om1326nmm 7703407ta u3158 ip117ahvg-desc 3 / sdp117ahvtmd 69210 om1326ntm 7703407ua u3158 ip117ahvig-desc 3 / sdp117ahvumd 3 / fm117ahvs7 69210 om1326stm 7703407xa u3158 ip117mahvh-desc 3 / lt117ahvh/883b 69210 om1326nhm 3 / sdp117ahvxmd 7703407ya u3158 ip117ahvk-desc 3 / lt117ahvk/883b 69210 om1326nkm 3 / sdp117ahvymd 7703407za u3158 ip117ahvr-desc 77034072a 3 / sdp117ahv2md 69210 om1326n2m 77034074a 69210 om1326srm 77034075a u3158 ip117ahve 7703408ma 3 / sdp137ahvmmd 69210 om1327smm 7703408na 3 / sdp137ahvnmd 69210 om1327nmm 7703408ta u3158 ip137ahvg-desc 3 / sdp137ahvtmd 69210 om1327ntm 7703408ua u3158 ip137ahvig-desc 3 / sdp137ahvumd 3 / fm137ahv/883 69210 om1327stm 7703408xa u3158 ip137ahvh-desc 3 / lt137ahvh/883b 3 / sdp137ahvxmd 7703408ya u3158 ip137ahvk-desc 3 / lt137ahvk/883b 69210 om1327nkm 3 / sdp137ahvymd 7703408za u3158 ip137ahvr-desc 77034082a 3 / sdp137ahv2md 69210 om1327n2m 77034086a u3158 ip137ahve see footnotes at end of table. 4 of 5 standard microcircuit drawi ng bulletin - continued standard microcircuit drawing pin 1 / vendor cage number vendor similar pin 2 / reference military specification pin 5962-7703404vxa 3 / lm137hvh-qmlv 5962-7703404vya 3 / lm137hvk-qmlv 5962r7703402mua 3 / omr1321stm/883b 5962r7703407mua 3 / omr1326stm/883b 1 / the lead finish shown for each pin representing a hermetic package is the most readily available from the manufacturer listed for that part. if t he desired lead finish is not listed contact the vendor to determine its availability. 2 / caution . do not use this number for item acquisiti on. items acquired to this number may not satisfy the performance r equirements of this drawing. 3 / not available from an approved source of supply. vendor cage vendor name number and address u3158 semelab plc coventry road, lutterworth, leicestershire le174jb united kingdom 21845 solitron devices, incorporated 3301 electronics way west palm beach, fl 33407-4697 27014 national semiconductor 2900 semiconductor drive p.o. box 58090 santa clara, ca 95052-8090 34333 microsemi integrated products 11861 western avenue garden grove, ca 92841-2119 69210 international rectifier 205 crawford street leominster, ma 01453-2353 the information contained herein is di sseminated for convenience only and the government assumes no liability whats oever for any inaccuracies in the information bulletin. 5 of 5 |
Price & Availability of 00-10-11
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |
