seite - 55 - ausgabedatum: 06-08-18 a-1130 wien lilienberggasse 13 tel.: +43-1-403 08 12 fax: +43-1-408 72 13 e-mail: info@knap.at http://www.knap.at wolfgang knap gesellschaft m.b.h. & co.kg 3,2x5mm crystal-oscillators very low power gmpb / gmqb / gmsb frequenzstabilit?t frequency stability betriebsbedingungen operating conditions modell model gm1pb/gm1qb/gm1sb 100ppm/-10~+70c betriebstemperatur operating temp. -10~+70c, -40~+85c gm2pb/gm2qb/gm2sb 50ppm/-10~+70c lagertemperatur storage temperature -55~+125c gm3pb/gm3qb/gm3sb 25ppm/-10~+70c gm1pbr/gm1qbr/gm1sbr 100ppm/-40~+85c gm2pbr/gm2qbr/gm2sbr 50ppm/-40~+85c betriebsspannung v dd supply voltage gmpb gmqb gmsb +3,3v 5% +2,8v 5% +2,5v 5% elektrische daten electrical characteristics t a = 25c, v dd = 3,3 v or 2,8 v or 2,5 v, c l = 15 pf parameter parameter bedingungen conditions frequenzbereich frequ. range (mhz) gmsb gmqb gmpb max. stromaufnahme max. input current i dd 1,800 ~ 32,000 32,000 + ~ 50,000 1,5 ma 2,5 ma 2,0 ma 3,0 ma 2,5 ma 3,5 ma frequenzstabilit?t frequency stability ber alles *) all conditions *) 25 ppm ~ 100 ppm tastverh?ltnis symmetry @50% v dd @1,4 v 45/55 % ausgangsspannung output voltage v ol v oh ?0? level ?1? level 10% v dd max. 90% v dd min. anstiegszeit max. rise time max. t r 10% - 90% v dd 12 ns abfallzeit max. fall time max. t f 90% - 10% v dd 12 ns standbystrom max. standby current max. v il 30% v dd 1 a max. belastbarkeit max. driving ability cmos 15 pf startzeit max. start-up time max. 0,0 v ~ v dd 1,800 ~ 50,000 5 ms *) anmerkung: inkl. abgleichtoleranz, temperaturgang, spannungs- und last?nderung, alterung, schock und vibration note: incl. frequency and temperature tolerance, supply voltage and load change, aging, shock and vibration 25ppm/-40/+85c nur inkl. abgleichtoleranz, temperaturgang, spannungs- und last?nderung 25ppm/-40/+85c only incl. frequency and temperature tolerance, supply voltage and load change anschlu?belegung pin connections abmessungen in mm dimensions in mm empfohlenes layout recommended solder pad layout #1 e/d #2 gnd #3 out #4 v dd funktionstabelle enable /disable function inh (pin #1) output (pin #3) open active ?1? (v ih 70% v dd ) active ?0? (v il 30% v dd ) high z #1 #2 #4 #3 0,95 0,1 #1 #2 #4 #3 3,2 0,2 5,0 0,2. lead-free/rohs-conformal 1,4 1,4 1,4 1,1 1,4 1,1
|