rating to 1000v prv ideal for printed circuit board low forward voltage drop,high current capability reliable low cost construction utilizing molded plastic technique results in inexpensive product the plastic material has u/l flammability classification 94v-0 maximum ratings and electrical characteristics characteristics symbolkbj8005 kbj801 kbj802 kbj804 kbj806 kbj808 KBJ810 unit maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 30 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward (with heatsink note 2) rectified current @ t c =100 (without heatsink) peak forward surage current 8.3ms single half sine-wave super imposed on rated load (jedec method) maximum forward voltage at 4.0a dc v f v maximum dc reverse current @ t j =25 at rated dc blocking voltage @ t j =125 i 2 t rating for fusing (t<8.3ms) i 2 t a 2 s typical junction capacitance per element (note1) c j pf typical thermal resistance (note2) r jc /w operating temperature range t j storage temperature range t stg notes: 1.measured at 1.0mhz and applied reverse voltage of 4.0v dc. 2.device mounted on 75mm*75mm*1.6mm cu plate heatsink. reverse voltage - 50 to 1000volts forward current - 8.0 amperes dimensions in inches and (milimeters) for capacitive load, derate current by 20% single phase, half wave ,60hz, resistive or inductive load. rating at 25 ambient temperature unless otherwise specified. -55 to +125 i fsm 120 55 1.8 500 ua a 200 8.0 2.9 a i r 1.0 i (av) -55 to +150 10 kbj + ~ ~ _ ?.122(3.1) ?.134(3.4) .425(10.8) .441(11.2) .031(0.8) .023(0.6) .098(2.5) .114(2.9) ? .134(3.4) ? .122(3.1) .213(5.4) .197(5.0) .157(4.0) .173(4.4) .708(18.0) .669(17.0) .800(20.3) .776(19.7) (5.1) .198 .043(1.1) .035(0.9) .075(1.9) .094(2.4) .106(2.7) .096(2.3) 1.169(29.7) 1.193(30.3) .165(4.2) .142(3.6) spacing .303(7.7) .287(7.3) .287(7.3) .303(7.7) .402(10.2) .386(9.8) kbj8005-KBJ810 silicon bridge rectifiers features ? ? ? ? ? http://www.luguang.cn mail:lge@luguang.cn
instantaneous forward current, (a) fig.4-typical forward characteristics instantaneous forward voltage, volts 0.1 0.01 1.0 0 0.2 0.8 0.4 1.0 1.6 0.6 1.2 1.4 10 1.8 t j = 25 pulse width 300us number of cyclets at 60hz peak forward surge current, amperes flg.2-maximum non-repetitive surge current 10 100 0 2 50 20 5 0 200 250 50 100 150 pulse width 8.3ms single half-sine-wave (jedec method) 1000 100 10 1.0 0.1 0 20 40 60 80 100 percent of rated peak reverse voltage,(%) instantaneous reverse current ,(ua) fig.5-typical reverse characteristics t j =125 t j= 100 t j =50 t j=25 fig.3-typical junction capacitance reverse voltage,(volts) capacitance,(pf) 10.0 100 1.0 1.0 10 100 t j =25 ,f=1mh z fig.1-forward current derating curve case temperature, c average forward current amperes single phase half wave 60hz resistive or inductive load with heatsink with heatsink 60 120 140 100 80 40 20 0 7.0 1.0 6.0 3.0 4.0 2.0 5.0 8.0 kbj8005-KBJ810 silicon bridge rectifiers ratings and charactieristic curves http://www.luguang.cn mail:lge@luguang.cn
|
