S7U4E001A02 sensing evaluation unit e-series usb package z epsons ah-6120 high accuracy 6 dof sensor z wired connection via usb z multiple configurations z small size and low power consumption ? descriptions the multifunction sensor evaluation units the S7U4E001A02 perform a variety of sensing tasks. S7U4E001A02 have a six-axis sensor, which consis ts of three epson gyroscopes that provide high accuracy and stability on three axis and a triaxial accelerometer with a dynam ic range of 6 g, a triaxial geomagnetic sensor, and a pressure sensor. this evaluation unit is available with either a usb interface for easy connection to a pc. this also come with an accessory board that can be used to freely expand the interfaces and power source for use in an even wider range of evaluation environments. ? specifications z sensors 6-dof sensor (ah-6120lr) + 3 axis e-compass + pressure sensor - gyro (3 axis) range: +/-1000 dps, sampling frequency: up to 100 hz - acceleration (3 axis) range: +/-6 g, sampling frequency: up to 100 hz - e-compass (3 axis) range: 0. 6 mt, sensitivity: 0.3 ut/lsb - pressure sensor range: 300 to 1100hpa, accuracy: +/-300 pa z interface usb, uart z power supply usb bus power z unit size (w x h x t) 40 x 35 x 30 mm main unit connector fan-out board ? evaluation kit z main unit (2 boards are assembled) - sensor board - usb interface board z connector fan-out board block diagrams of main units usb i/f usb board acceleration (3 axis) gyro (3 axis) ah-6120lr e-compass cpu s1c17 series pressure sensor acceleration (3 axis) gyro (3 axis) ah-6120lr e-compass cpu s1c17 series pressure sensor sensor board pc seiko epson corporation
S7U4E001A02 ? evaluation by windows pc S7U4E001A02 windows pc usb i/f evaluation software evaluation board/kit and development tool important notice 1. this evaluation board/kit or development tool is designed fo r engineering evaluation, demonstration, or development purposes only. do not use it for any other purpose. it is not intended to meet the requirements of design for a finished product. 2. this evaluation board/kit or development tool is intended for use by an el ectronics engineer and is not a consumer product. the user should use these goods properly and safely. se iko epson does not assume any responsibility or liability of any kind if damage a nd/or fire is caused by its use. the user s hould cease to use the evaluat ion board/kit or development tool when any abnormal issue oc curs, even during proper and safe use. microdevices operations division 3. the part used for this evaluation board/kit or development tool may be changed without any notice. notice: no part of this material may be reproduced or duplicated in any fo rm or by any means without the written permission of seiko ep son. seiko epson reserves the right to make c hanges to this material without notice. se iko epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, furt her, there is no representation that this material is app licable to products requiring high level reliab ility, such as, medical products. moreo ver, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that any thing made in accordance with this material will be free from any patent or copy right infringement of a third party. this material or portions thereof may contain technology or the subject relati ng to strategic products under the control of the foreign exchange and foreign trade la w of japan and may require an export license from the ministry of economy, trade and industry or other approval from another government ag ency. all brands or product names mentioned herein are trademarks and/ or registered trademarks of t heir respective companies. ? seiko epson corporation 2011, all rights reserved epson s y stem p roducts website http://www.epson.jp/e/products/device/micro_system/ system business development group device sales & marketing department 421-8 hino, hino-shi, tokyo 191-8501, japan document code: 4121752 00 first issue july, 2011 2 phone: +81-42-587-8291 fax: +81-42-587-5116
|
