AOD474 75v n-channel mosfet general description product summary v ds i d (at v gs =10v) 10a r ds(on) (at v gs =10v) < 130m w r ds(on) (at v gs =4.5v) < 155m w 100% uis tested 100% r g tested symbol v ds the AOD474 combines advanced trench mosfet technology with a low resistance package to provide extremely low r ds(on) . this device is ideal for boost converters and synchronous rectifiers for consumer, telecom, industrial power supplies and led backligh ting. v maximum units parameter absolute maximum ratings t a =25c unless otherwise noted 75v drain-source voltage 75 g d s to252 dpak top view bottom view g s d g s d v gs i dm i as e as t j , t stg symbol t 10s steady-state steady-state r q jc maximum junction-to-case c/w c/w maximum junction-to-ambient a d 4.3 60 5.2 w power dissipation a p dsm w t a =70c 28.5 1.3 t a =25c t c =25c 2.1 14.5 t c =100c power dissipation b p d a t a =25c i dsm a t a =70c i d 10 7 t c =25c t c =100c 18 pulsed drain current c continuous drain current mj avalanche current c 2 continuous drain current 5 2.5 a 10 avalanche energy l=0.1mh c units junction and storage temperature range -55 to 175 c thermal characteristics parameter typ max v 20 gate-source voltage maximum junction-to-ambient a c/w r q ja 17 50 25 rev 0: july 2012 www.aosmd.com page 1 of 6
AOD474 symbol min typ max units bv dss 75 v v ds =75v, v gs =0v 1 t j =55c 5 i gss 100 na v gs(th) gate threshold voltage 1.2 1.8 2.4 v i d(on) 18 a 105 130 t j =125c 190 235 120 155 m w g fs 10 s v sd 0.75 1 v i s 10 a c iss 280 pf c oss 30 pf c rss 13 pf r g 1.1 2.2 3.3 w q g (10v) 6 9 nc q g (4.5v) 3 5 nc q gs 1.2 nc q gd 1.5 nc t d(on) 5 ns t 3.5 ns on state drain current i d =10ma, v gs =0v v gs =10v, v ds =5v v gs =10v, i d =5a gate-body leakage current reverse transfer capacitance v gs =0v, v ds =37.5v, f=1mhz v ds =v gs i d =250 m a v ds =0v, v gs =20v maximum body-diode continuous current input capacitance output capacitance forward transconductance i s =1a,v gs =0v v ds =5v, i d =5a dynamic parameters v gs =4.5v, i d =2a r ds(on) static drain-source on-resistance diode forward voltage m w electrical characteristics (t j =25c unless otherwise noted) static parameters parameter conditions i dss m a zero gate voltage drain current drain-source breakdown voltage turn-on rise time v =10v, v =37.5v, r =7.5 w , gate resistance v gs =0v, v ds =0v, f=1mhz total gate charge gate source charge gate drain charge total gate charge switching parameters turn-on delaytime v gs =10v, v ds =37.5v, i d =5a t r 3.5 ns t d(off) 16 ns t f 3.5 ns t rr 14 ns q rr 52 nc this product has been designed and qualified for th e consumer market. applications or uses as critical components in life support devices or systems are n ot authorized. aos does not assume any liability ar ising out of such applications or uses of its products. aos reserves the right to improve product design, functions and reliability without notice. i f =5a, di/dt=500a/ m s body diode reverse recovery charge body diode reverse recovery time i f =5a, di/dt=500a/ m s turn-on rise time turn-off delaytime v gs =10v, v ds =37.5v, r l =7.5 w , r gen =3 w turn-off fall time a. the value of r q ja is measured with the device mounted on 1in 2 fr-4 board with 2oz. copper, in a still air environ ment with t a =25 c. the power dissipation p dsm is based on r q ja and the maximum allowed junction temperature of 150 c. the value in any given application depends on the user's specific board design, and the maximu m temperature of 175 c may be used if the pcb allows it. b. the power dissipation p d is based on t j(max) =175 c, using junction-to-case thermal resistance, and i s more useful in setting the upper dissipation limit for cases where additional heatsi nking is used. c. repetitive rating, pulse width limited by juncti on temperature t j(max) =175 c. ratings are based on low frequency and duty cycl es to keep initial t j =25 c. d. the r q ja is the sum of the thermal impedance from junction t o case r q jc and case to ambient. e. the static characteristics in figures 1 to 6 are obtained using <300 m s pulses, duty cycle 0.5% max. f. these curves are based on the junction-to-case t hermal impedance which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of t j(max) =175 c. the soa curve provides a single pulse rating. g. the maximum current rating is package limited. h. these tests are performed with the device mounte d on 1 in 2 fr-4 board with 2oz. copper, in a still air environ ment with t a =25 c. rev 0: july 2012 www.aosmd.com page 2 of 6
AOD474 typical electrical and thermal characteristics 17 52 10 0 18 0 5 10 15 20 0 1 2 3 4 5 6 i d (a) v gs (volts) figure 2: transfer characteristics (note e) 60 80 100 120 140 160 180 200 220 0 2 4 6 8 10 r ds(on) (m w ww w ) i d (a) figure 3: on-resistance vs. drain current and gate voltage (note e) 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 0 25 50 75 100 125 150 175 200 normalized on-resistance temperature (c) figure 4: on-resistance vs. junction temperature (note e) v gs =4.5v i d =2a v gs =10v i d =5a 25 c 125 c v ds =5v v gs =4.5v v gs =10v 0 5 10 15 20 0 1 2 3 4 5 i d (a) v ds (volts) fig 1: on-region characteristics (note e) v gs =3.0v 4v 3.5v 10v 4.5v 6v 40 1.0e-05 1.0e-04 1.0e-03 1.0e-02 1.0e-01 1.0e+00 1.0e+01 0.0 0.2 0.4 0.6 0.8 1.0 1.2 i s (a) v sd (volts) figure 6: body-diode characteristics (note e) 25 c 125 c (note e) 80 100 120 140 160 180 200 220 240 260 2 4 6 8 10 r ds(on) (m w ww w ) v gs (volts) figure 5: on-resistance vs. gate-source voltage (note e) i d =5a 25 c 125 c rev 0: july 2012 www.aosmd.com page 3 of 6
AOD474 typical electrical and thermal characteristics 17 52 10 0 18 0 2 4 6 8 10 0 2 4 6 8 v gs (volts) q g (nc) figure 7: gate-charge characteristics 0 100 200 300 400 500 0 15 30 45 60 75 capacitance (pf) v ds (volts) figure 8: capacitance characteristics c iss 0 40 80 120 160 200 0.0001 0.001 0.01 0.1 1 10 power (w) pulse width (s) figure 10: single pulse power rating junction - to - c oss c rss v ds =37.5v i d =5a t j(max) =175 c t c =25 c 10 m s 0.0 0.1 1.0 10.0 100.0 0.01 0.1 1 10 100 1000 i d (amps) v ds (volts) figure 9: maximum forward biased safe 10 m s 10ms 1ms dc r ds(on) limited t j(max) =175 c t c =25 c 100 m s 40 figure 10: single pulse power rating junction - to - case (note f) 0.01 0.1 1 10 1e-05 0.0001 0.001 0.01 0.1 1 10 100 z q qq q jc normalized transient thermal resistance pulse width (s) figure 11: normalized maximum transient thermal imp edance (note f) single pulse d=t on /t t j,pk =t c +p dm .z q jc .r q jc t on t p d in descending order d=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse figure 9: maximum forward biased safe operating area (note f) r q jc =5.2 c/w rev 0: july 2012 www.aosmd.com page 4 of 6
AOD474 typical electrical and thermal characteristics 17 52 10 0 18 0 5 10 15 20 25 30 0 25 50 75 100 125 150 175 power dissipation (w) t case (c) figure 13: power de-rating (note f) 0 5 10 15 0 25 50 75 100 125 150 175 current rating i d (a) t case (c) figure 14: current de - rating (note f) 1 10 100 1000 10000 1e-05 0.001 0.1 10 1000 power (w) pulse width (s) figure 15: single pulse power rating junction - to - t a =25 c 1 10 100 1 10 100 i ar (a) peak avalanche current time in avalanche, t a ( m mm m s) figure 12: single pulse avalanche capability (note c) t a =25 c t a =150 c t a =100 c t a =125 c 40 0.001 0.01 0.1 1 10 1e-05 0.0001 0.001 0.01 0.1 1 10 100 1000 z q qq q ja normalized transient thermal resistance pulse width (s) figure 16: normalized maximum transient thermal imp edance (note h) single pulse d=t on /t t j,pk =t a +p dm .z q ja .r q ja t on t p d in descending order d=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse figure 14: current de - rating (note f) figure 15: single pulse power rating junction - to - ambient (note h) r q ja =60 c/w rev 0: july 2012 www.aosmd.com page 5 of 6
AOD474 - + vdc ig vds dut - + vdc vgs vgs 10v qg qgs qgd charge gate charge test circuit & waveform - + vdc dut vdd vgs vds vgs rl rg vgs vds 10% 90% resistive switching test circuit & waveforms t t r d(on) t on t d(off) t f t off id + l vds bv unclamped inductive switching (uis) test circuit & waveforms vds dss 2 e = 1/2 li ar ar vdd vgs vgs rg dut - + vdc vgs id vgs i ig vgs - + vdc dut l vgs vds isd isd diode recovery test circuit & waveforms vds - vds + i f ar di/dt i rm rr vdd vdd q = - idt t rr rev 0: july 2012 www.aosmd.com page 6 of 6
|