RN1910FS,rn1911fs 2007-11-01 1 toshiba transistor silicon npn epitaxial type (p ct process) (bias resi stor built-in transistor) RN1910FS,rn1911fs switching, inverter circuit, interface circuit and driver circuit applications ? two devices are incorporated into a fine pitch small mold (6-pin) package. ? incorporating a bias resistor into a transistor reduces parts count. ? reducing the parts count enables the manufacture of ever more compact equipment and lowers assembly cost. ? complementary to rn2910fs, rn2911fs equivalent circuit and bias resistor values absolute maximum ratings (ta = 25c) (q1, q2 common) electrical characteristics (ta = 25c) (q1, q2 common) unit: mm fs6 1.emiitter1 2.emitter2 3.base2 4.collector2 5.base1 6.collector1 0.150.0 5 0.10.05 6 0.80.05 1.00.05 0.70.0 5 1 2 0.10.05 0.3 5 0.3 5 3 1.00.05 0.10.05 5 4 0.4 8 +0.0 2 -0.0 4 (e1) (e2) (b2) (c2) (b2) (c1) fs6 1. emitter1 2. base1 3. collector2 4. emitter2 5. base2 6. coleector1 (e1) (b1) (c2) (e2) (b2) (c1) jedec D jeita D toshiba 2-1f1d weight: 0.001g (typ.) 6 5 4 1 2 3 q1 q2 characteristics symbol rating unit collector-base voltage v cbo 20 v collector-emitter voltage v ceo 20 v emitter-base voltage v ebo 5 v collector current i c 50 ma collector power dissipation p c (note 1) 50 mw junction temperature t j 150 c storage temperature range t stg ?55~150 c note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decre ase in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). note 1: total rating equivalent circuit ( top view ) characteristics symbol test condition min typ. max unit collector cut-off current i cbo v cb = 20 v, i e = 0 ? ? 100 na emitter cut-off current i ebo v eb = 5 v, i c = 0 ? ? 100 na dc current gain h fe v ce = 5 v, i c = 1 ma 300 ? ? collector-emitter saturation voltage v ce (sat) i c = 5 ma, i b = 0.25 ma ? ? 0.15 v collector output capacitance c ob v cb = 10 v, i e = 0, f = 1 mhz ? 1.2 ? pf RN1910FS 3.76 4.7 5.64 input resistor rn1911fs r1 ? 8 10 12 k
RN1910FS,rn1911fs 2007-11-01 2 (q1, q2 common) 0.1 1 10 100 0.1 1 10 100 10 100 1000 10000 0 0.2 0.4 0.6 0.8 1 1.2 1.4 RN1910FS RN1910FS collector current ic ( ma ) input voltage vi(on) (v) collector current ic ( a ) input voltage vi(off) (v) ta=100c emitter common vce=5v 25 -25 ta=100c 25 -25 ic - vi(on) ic - vi(off) emitter common vce=0.2v 0.1 1 10 100 0.1 1 10 100 10 100 1000 10000 0 0.2 0.4 0.6 0.8 1 1.2 1.4 collector current ic ( ma ) input voltage vi(on) (v) collector current ic ( a ) input voltage vi(off) (v) ta=100c emitter common vce=0.2v emitter common vce=5v 25 -25 25 -25 ic - vi(on) ic - vi(off) ta=100c rn1911fs rn1911fs
RN1910FS,rn1911fs 2007-11-01 3 (q1,q2 common) 10 100 1000 0.1 1 10 100 1 10 100 1000 0.1 1 10 100 rn1110fs RN1910FS RN1910FS d c cu rrent g ain hfe collector - emitter saturation voltage vce(sat) (mv) collector current ic (ma) collector current ic (ma) emitter common ic / ib=20 emitter common vce=5v ta=100c 25 -25 ta=100c 25 -25 hfe - ic vce(sat) - ic 10 100 1000 0.1 1 10 100 1 10 100 1000 0.1 1 10 100 dc current gain hfe collector - emitter saturation voltage vce(sat) (mv) collector current ic (ma) collector current ic (ma) emitter common ic / ib=20 emitter common vce=5v ta=100c 25 -25 ta=100c 25 -25 hfe - ic vce(sat) - ic rn1911fs rn1911fs
RN1910FS,rn1911fs 2007-11-01 4 type name marking RN1910FS rn1911fs handling precaution when handling individual devices (which are not yet mount ed on a circuit board), be sure that the environment is protected against electrostatic discharge. o perators should wear anti-st atic clothing, and containe rs and other objects that come into direct contact with devices should be made of anti-static materials. type name f9 1 2 3 4 5 6 type name ff 1 2 3 4 5 6
RN1910FS,rn1911fs 2007-11-01 5 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively ?toshiba?), reserve the right to make changes to the in formation in this document, and related hardware, software a nd systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduction is permissible only if reproduction is without alteration/omission. ? though toshiba works continually to improve product?s quality a nd reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for prov iding adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malf unction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant toshib a information, including without limitation, this document, the s pecifications, the data sheets and application notes for product and the precautio ns and conditions set forth in the ?toshiba semiconductor re liability handbook? and (b) the instructions for the application that produc t will be used with or for. customers are solely responsible for all aspects of their own product design or app lications, including but not limited to (a) determining the appropriateness of the us e of this product in such design or applications; (b ) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating a ll operating parameters for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general el ectronics applications (e.g., computers, personal equipment, office equipment, measur ing equipment, industrial robots and home electroni cs appliances) or for specific applications as expressly stated in this document . product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or relia bility and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ( ?unintended use?). unintended use includes, without limitation, equipment us ed in nuclear facilities, equipment used in the aerospace indus try, medical equipment, equipment used for automobiles, trains, ship s and other transportation, traffic signaling equipment, equipme nt used to control combustions or explosions, safety devices, elevators and escalators, devic es related to electric power, and equipmen t used in finance-related fields. do not use product for unintended use unless specifically permitted in this document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, w hether express or implied, by estoppel or otherwise. ? absent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, o r information, including warranties or conditio ns of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? do not use or otherwise make available product or related so ftware or technology for any m ilitary purposes, including without limitation, for the design, development, use, stockpi ling or manufacturing of nuclear, chemical, or biological weapons or missile technolog y products (mass destruction weapons). product and related software and te chnology may be controlled under the japanese foreign exchange a nd foreign trade law and the u.s. export administration regulations. export and re-export of product or related software or techno logy are strictly prohibited except in compliance wi th all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclusion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result o f noncompliance with applicable laws and regulations.
|
