published date : mar 25, 2008 drawing no : sd sa6559 v1 checked : b.l.l iu p.1/4 part number: LM2BB11W t-1 (3mm) solid state lamp www.sunled.com part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. LM2BB11W blue ingan water clear 1500 2990 458 20 features z low power consumption. z popular t-1 diameter package. z general purpose leads. z reliable and rugged. z long life - solid state reliability. z available on tape and reel. rohs compliant. attention observe precautions for handling electrostatic discharge sensitive devices preliminary spec m2bb (ingan) unit forward voltage (typ.) (i f =20ma) v f 3.2 v forward voltage (max.) (i f =20ma) v f 3.7 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 458 nm wavelength of dominant emission (typ.) (i f =20ma) d 465 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 22 nm capacitance (typ.) (v f =0v, f=1mhz) c 110 pf operating characteristics (t a =25c ) absolute maximum ratings (t a =25c ) m2bb (ingan) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 100 ma power dissipation p t 111 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 1000 v lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base] 260c for 5 seconds electrostatic discharge threshold (hbm) notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3.specifications are subject to change without notice.
published date : mar 25, 2008 drawing no : sd sa6559 v1 checked : b.l.l iu p.2/4 part number: LM2BB11W t-1 (3mm) solid state lamp www.sunled.com ? m2bb
published date : mar 25, 2008 drawing no : sd sa6559 v1 checked : b.l.l iu p.3/4 part number: LM2BB11W t-1 (3mm) solid state lamp www.sunled.com remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity/ luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : mar 25, 2008 drawing no : sd sa6559 v1 checked : b.l.l iu p.4/4 part number: LM2BB11W t-1 (3mm) solid state lamp www.sunled.com packing & label specifications LM2BB11W
|