View T150XG01-V4_5476314.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

a u op tr o n i cs c o rp or at i o n p r odu c t sp e c if i c a ti on docu m ent ve r s io n 0 . 1 1/2 8 t1 50 x g 0 1 v4 produ c t de s cription: 15 w x g a co l or tf t -l c d m od u le a uo model n a m e: t 150 x g01 v4 cu s to m er p a r t no/ p roject n a me : cu s to m er s ignature a u o 200 7 /03/12 plea s e r e t u r n on e c op y w i t h y our s i g na t u r e a n d c o m m en t s f or our c on f i r m a t i o n . a u op t r o ni cs c or p ora t i o n * no r e pro d u c tio n a nd re d i s tribution a l lo w e d www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 2/28 t150xg01 v4 contents 1. handling precautions..............................................................................................................4 2. general description.................................................................................................................5 2.1 display characteristics...................................................................................................................5 3. functional block diagram.....................................................................................................10 4. absolute maximum ratings..................................................................................................11 4.1 absolute ratings of tft lcd module..........................................................................................11 4.2 absolute ratings of backlight unit................................................................................................11 4.3 absolute ratings of environment..................................................................................................12 5. electrical characteristics.......................................................................................................13 5.1 tft lcd module.........................................................................................................................13 5.2 backlight unit...............................................................................................................................15 6. signal characteristic.............................................................................................................16 6.1 pixel format image.......................................................................................................................16 6.2 the input data format..................................................................................................................17 6.4 interface timing............................................................................................................................20 6.5 power on/off sequence.............................................................................................................22 7. connector & pin assignment...............................................................................................23 7.1 tft lcd module.........................................................................................................................23 7.2 backlight unit...............................................................................................................................24 8. reliability test.......................................................................................................................25 9. shipping label.......................................................................................................................26 10. mechanical characteristics.................................................................................................27 www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 3/28 t150xg01 v4 record of revision version and date page old description new description remark 0.1 2006/09/05 all first edition for customer all www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 4/28 t150xg01 v4 1. handling precautions 1) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open or modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the ccfl reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an enclosure, do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contains a small amount of mercury. please follow local ordinances or regulations for disposal. 13) small amount of materials having no flammability grade is used in the lcd module. the lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied exemption. 14) the lcd module is designed so that the ccfl in it is supplied by limited current circuit (iec60950 or ul1950). do not connect the ccfl in hazardous voltage circuit. www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 5/28 t150xg01 v4 2. general description this specification applies to the 15 inch-wide color tft-lcd module t150xg01 v4. the display supports the xga+ (10240(h) x 768(v)) screen format and 16.2m colors. all input signals are 1 channel lvds interface compatible. this module does not contain an inverter card for backlight. . 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications active area [mm] 304.128 (h) x 228.096 pixels h x v 1024(x3) x 768 pixel pitch [mm] 0.297 (per one triad) x 0.297 pixel arrangement r.g.b. vertical stripe display mode tn mode, normally white white luminance [cd/m 2 ] 250 (typ) @ 8ma contrast ratio 700 optical responsetime [msec] 8 (typ, on/off) nominal input voltage vdd [volt] +3.3 (typ) power consumption (vdd line + ccfl line) [watt] 13.3 w (typ.) @8ma (gray bar pattern) weight [grams] 1000 (typ) physical size (h x v x d) [mm] 326.5(w) x 253.5(h) x 12(d) (typ) electrical interface one channel lvds surface treatment anti-glare type, hardness 3h support colors 16.2m colors (rgb 6-bits+frc) rohs compliance rohs compliance www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 6/28 t150xg01 v4 2.2 optical characteristics the optical characteristics are measured under stable conditions at 25 (room temperature): item unit conditions min. typ. max. note horizontal (right) cr = 10 (left) 60 60 70 70 - viewing angle [degree] vertical (up) cr = 10 (down) 60 50 70 60 - 1 luminance uniformity [%] 9 points 75 80 - 2, 3 rising - 6 9 falling - 2 4 optical response time [msec] rising + falling - 8 13 4, 6 red x 0.612 0.642 0.672 red y 0.307 0.337 0.367 green x 0.276 0.306 0.336 green y 0.551 0.581 0.611 blue x 0.114 0.144 0.174 blue y 0.071 0.101 0.131 white x 0.283 0.313 0.343 color / chromaticity coordinates (cie 1931) white y 0.299 0.329 0.359 4 white luminance (at ccfl= 6.5ma) [cd/m 2 ] 200 250 - 4 contrast ratio 450 700 - 4 cross talk (at 75hz) [%] - 1.2 1.5 5 flicker [db] - -20 7 optical equipment: bm-5a, bm-7, pr880, or equivalent www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 7/28 t150xg01 v4 note 1: definition of viewing angle viewing angle is the measurement of contrast ratio R 10, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as follows; 90 ( ) horizontal left and right and 90 ( ) vertical, high (up) and low (down). the measurement direction is typically perpendicular to the display surface with the screen rotated about its center to develop the desired measurement viewing angle. note 2: 9 points position note 3: the luminance uniformity of 9 points is defined by dividing the maximum luminance values by the minimum test point luminance minimum luminance of 9 points w9 = m ax imum luminance of 9 points 50 % 90 % 90 % 50 % 10 % 10 % www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 8/28 t150xg01 v4 note 4: measurement method the lcd module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 30 minutes in a stable, windless and dark room. note 5: definition of cross talk (ct) ct = | yb C ya | / ya 100 (%) where ya = luminance of measured location without gray level 0 pattern (cd/m2) yb = luminance of measured location with gray level 0 pattern (cd/m2) center of the screen tft - lcd 50 cm photo detector lcd panel field=2 www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 9/28 t150xg01 v4 note 6: definition of response time: the output signals of photo detector are measured when the input signals are changed from full black to full white (rising time), and from full white to full black (falling time), respectively. the response time is interval between the 10% and 90% of amplitudes. please refer to the figure as below. note 7: subchecker pattern r g b r g b r g b r g b r g b r g b method: record dbv & dc value with (westar)trd-100 level dc hz) 30 level(at ac log 20 (db) flicker = gray level = l127 gray level = l0 amplitude time dc ac www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 10/28 t150xg01 v4 3. functional block diagram the following diagram shows the functional block of the 15.0 inches wide color tft-lcd module: type part number msb240420e/ 3804-e20n-06r 35001hs-02l mating housing part number hrs df14-20s-1.25c 35001wr-02l c o n n e c t o r dc/dc converter lvds receiver timing controller gamma correction tft-lcd 1024(x3) x 768 pixels g1 g768 d1 d3072 inverter dc power auo asic lvds 2 ccfl i/f + x - pcb x - driver ic y - d r i v e r i c +3.3v www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 11/28 t150xg01 v4 4. absolute maximum ratings absolute maximum ratings of the module is as following: 4.1 absolute ratings of tft lcd module item symbol min. max. unit conditions logic/lcd drive voltage vdd 0.3 +3.6 [volt] note 1,2 4.2 absolute ratings of backlight unit item symbol min. max. unit conditions ccfl current icfl - 8.5 [ma] rms note 1,2 www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 12/28 t150xg01 v4 4.3 absolute ratings of environment item symbol min. max. unit conditions operating temperature top 0 +50 [ o c] operating humidity hop 8 90 [%rh] storage temperature tst -20 +60 [ o c] storage humidity hst 8 90 [%rh] note 3 note 1: with in ta= 25 note 2: permanent damage to the device may occur if exceed maximum values note 3: for quality performance, please refer to auo iis (incoming inspection standard). operating range storage range www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 13/28 t150xg01 v4 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows: symble parameter min. typ. max. unit condition vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] 10% idd vdd current - 600 700 [ma] vin=3.3v , gray bar pattern, at 60hz irush lcd inrush current - - 3 [a] note pdd vdd power 2.0 2.3 [watt] vin=3.3v , gray bar pattern, at 60hz note: measurement conditions: +5.0v +12.0v sw vcc r1 47k r2 1k vr1 47k f1 q3 ao6402 g d 2 s d 1 d 5 d 6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) 90% 10% vin rising time 0 v 3.3 v 470 us +3.3v www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 14/28 t150xg01 v4 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vin is off it is recommended to refer the specifications of sn75lvds82dgg (texas instruments) in detail. each signal characteristics are as follows; symbol parameter min typ max units condition vth differential input high threshold - - 100 [mv] vicm = 1.2v note vtl differential input low threshold -100 - - [mv] vicm = 1.2v note vid input differential voltage 100 400 600 [mv] note vicm differential input common mode voltage 1.0 1.2 1.5 [v] vth/vtl = 100mv note note: lvds signal waveform vth vid vicm vss vtl www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 15/28 t150xg01 v4 5.2 backlight unit parameter guideline for ccfl inverter is under stable conditions at 25 (room temperature): parameter min. typ. max. unit condition ccfl standard current(iscfl) 7.5 8 8.5 [ma] rms note 2 ccfl operation current(ircfl) 2.5 8 8.5 [ma] rms note 2 ccfl frequency(fcfl) 40 55 80 [khz] note 3,4 ccfl ignition voltage(vicfl, ta= 0) 1450 - - [volt] rms ccfl ignition voltage(vicf, ta= 25) 1100 - - [volt] rms note 5 ccfl operation voltage (vcfl) - 620 (@ 8ma) [volt] rms note 6 ccfl power consumption(pcfl) - 10 11 [watt] note 6 ccfl life time(ltcfl) 30000 40000 [hour] note 7 note 1: typ. are auo recommended design points. *1 all of characteristics listed are measured under the condition using the auo test inverter. *2 in case of using an inverter other than listed, it is recommended to check the inverter carefully. sometimes, interfering noise stripes appear on the screen, and substandard luminance or flicker at low power may happen. *3 in designing an inverter, it is suggested to check safety circuit very carefully. impedance of ccfl, for instance, becomes more than 1 [m ohm] when ccfl is damaged. *4 generally, ccfl has some amount of delay time after applying kick-off voltage. it is recommended to keep on applying kick-off voltage for 1 [sec] until discharge. *5 reducing ccfl current increases ccfl discharge voltage and generally increases ccfl discharge frequency. so all the parameters of an inverter should be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. note 2: it should be employed the inverter which has duty dimming , if ircfl is less than 3ma. note 3: ccfl discharge frequency should be carefully determined to avoid interference between inverter and tft lcd. note 4: the frequency range will not affect to lamp life and reliability characteristics. note 5: ccfl inverter should be able to give out a power that has a generating capacity of over 1,450 voltage. lamp units need 1,450 voltage minimum for ignition. note 6: the variance of ccfl power consumption is 10%. calculator value for reference (iscfl vcfl 2= pcfl) note 7: definition of life: brightness becomes 50%. the typical life time of ccfl is under the condition at 8 ma lamp current. www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 16/28 t150xg01 v4 6. signal characteristic 6.1 pixel format image following figure shows the relationship of the input signals and lcd pixel format. www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 17/28 t150xg01 v4 6.2 the input data format devshs og0 or5or4or3or2or1or0 ob0 og3 og4og1 og2 ob1 og5 ob5ob3 ob4ob2 or7 ob7 or6 ob6 og7og6 clkin+ rin0 +/- clkin- rsvd current cycle rin1 +/- rin2 +/- rin3 +/- note1 : please follow pswg. note2 : 8-bit in note3 : r/g/b data 7:msb, r/g/b data 0:lsb www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 18/28 t150xg01 v4 6.3 signal description the module using a pair of lvds receiver sn75lvds82(texas instruments) or compatible. lvds is a differential signal technology for lcd interface and high speed data transfer device. transmitter shall be sn75lvds83(negative edge sampling) or compatible . the first lvds port(rxoxxx) transmits odd pixels while the second lvds port(rxexxx) transmits even pixels. cwy20g-a0d1t (ptwo) or msb240420 (stm) pin no. symbol description 1 vdd power supply, 3.3v (typical) 2 vdd power supply, 3.3v (typical) 3 vss ground 4 vss ground 5 rin0- - lvds differential data input (r0-r5, g0) 6 rin0+ + lvds differential data input (r0-r5, g0) 7 vss ground 8 rin1- - lvds differential data input (g1-g5, b0-b1) 9 rin1+ + lvds differential data input (g1-g5, b0-b1) 10 vss ground 11 rin2- - lvds differential data input (b2-b5, hs, vs, de) 12 rin2+ + lvds differential data input (b2-b5, hs, vs, de) 13 vss ground 14 clkin- - lvds differential clock input 15 clkin+ + lvds differential clock input 16 vss ground 17 rin3- - lvds differential data input (r6-r7, g6-g7,b6-b7) 18 rin3+ - lvds differential data input (r6-r7, g6-g7,b6-b7) 19 vss ground 20 vss ground www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 19/28 t150xg01 v4 note1:start from left side note2: please follow pswg. v s s v d d www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 20/28 t150xg01 v4 6.4 interface timing 6.4.1 timing characteristics signal item symbol min typ max unit clock frequency clk 50 65 81 mhz horizontal active thd 1024 1024 1024 tclk clock timing hsync timing horizontal blanking thbl 30 320 1024 tclk horizontal period th 1054 1344 2048 tck vertical active tvd 768 768 768 th vsync timing vertical blanking tvbl 8 38 256 th vertical period tv 776 806 1024 th clock timing clock frequency clk 50 65 81 mhz hsync timing horizontal active thd 1024 1024 1024 tclk note: de mode only note: typical value refer to vesa standard www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 21/28 t150xg01 v4 6.4.2 timing digram www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 22/28 t150xg01 v4 www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 23/28 t150xg01 v4 6.5 power on/off sequence vin power and lamp on/off sequence is as follows. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vin is off. power sequence timing value parameter min. typ. max. unit t1 0.5 - 10 [ms] t2 30 40 50 [ms] t3 200 - - [ms] t4 100 - - [ms] t5 0 16 50 [ms] t6 - - 10 [ms] t7 1000 - - [ms] t7 t 5 t2 t3 valid data t1 10% 90% 10% 90% t4 t 6 power supply vdd lvds signal backlight on www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 24/28 t150xg01 v4 7. connector & pin assignment physical interface is described as for the connector on module.these connectors are capable of accommodating the following signals and will be following components . 7.1 tft lcd module 7.1.1 connector connector name / designation interface connector / interface card manufacturer stm/e&t type part number msb240420e/ 3804-e20n-06r mating housing part number hrs df14-20s-1.25c 7.1.2 pin assignment pin# signal name pin# signal name 1 vdd 2 vdd 3 vss 4 vss 5 rin0- 6 rin0+ 7 vss 8 rin1- 9 rin1+ 10 vss 11 rin2- 12 rin2+ 13 vss 14 clkin- 15 clkin+ 16 vss 17 rin3- 18 rin3+ 19 vss 20 vss www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 25/28 t150xg01 v4 7.2 backlight unit physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. connector name / designation lamp connector / backlight lamp manufacturer yeonho type part number 35001hs-02l mating type part number 35001wr-02l 7.2.1 signal for lamp connector connector no. pin no. input color function 1 hot1 pink high voltage upper cn1 2 cold1 white low voltage connector no. pin no. input color function 1 hot1 pink high voltage lower cn2 2 cold1 white low voltage www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 26/28 t150xg01 v4 8. reliability test environment test conditions are listed as following table. items required condition note temperature humidity bias (thb) ta= 50, 80%rh, 300hours high temperature operation (hto) ta= 50, 50%rh, 300hours low temperature operation (lto) ta= 0, 300hours high temperature storage (hts) ta= 60, 300hours low temperature storage (lts) ta= -20, 300hours vibration test (non-operation) acceleration: 1.5 g wave: random frequency: 10 - 200 - 10 hz sweep: 30 minutes each axis (x, y, z) shock test (non-operation) acceleration: 50 g wave: half-sine active time: 20 ms direction: x, y, z (one time for each axis) drop test height: 60 cm, package test thermal shock test (tst) -20 /30min, 60 /30min, 100 cycles 1 on/off test on/10sec, off/10sec, 30,000 cycles contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/ point. esd (electro static discharge) air discharge: 15kv, 150pf(330 ) 1sec 8 points, 25 times/ point. 2 altitude test operation:10,000 ft non-operation:30,000 ft note 1: the tft-lcd module will not sustain damage after being subjected to 100 cycles of rapid temperature change. a cycle of rapid temperature change consists of varying the temperature from -2 0 to 6 0 , and back again. power is not applied during the test. after temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on. note 2: according to en61000-4-2 , esd class b: some performance degradation allowed. no data lost. self-recoverable. no hardware failures. www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 27/28 t150xg01 v4 9. shipping label the shipping label format is shown as below. www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 28/28 t150xg01 v4 10. mechanical characteristics www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation product specification document version 0.1 29/28 t150xg01 v4 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of T150XG01-V4

	To Download T150XG01-V4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .