for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com freq. multipliers - active - smt 5 5 - 42 general description features functional diagram output power: +4 dbm sub-harmonic suppression: >25 dbc ssb phase noise: -142 dbc/hz single supply: 5v@ 52 ma 24 lead 4x4 mm smt package: 16 mm 2 electrical specifi cations, t a = +25 c, vcc= 5v typical applications active multiplier for x band applications: ? fiber optic ? point-to-point radios ? military radar the hmc443lp4 & HMC443LP4E are active miniature x4 frequency multipliers utilizing ingap gaas hbt technology in 4x4 mm leadless surface mount packages. power output is +4 dbm typical from a 5v supply voltage and varies little vs. input power, temperature and supply voltage. suppression of undesired fundamental and sub-harmonics is >25 dbc typical with respect to output signal level. the low additive ssb phase noise of -142 dbc/hz at 100 khz offset helps the user maintain good system noise performance. the hmc443lp4 & HMC443LP4E are ideal for use in lo multiplier chains allowing reduced parts count vs. traditional approaches. parameter min. typ. max. units frequency range, input 2.45 - 2.80 ghz frequency range, output 9.8 - 11.2 ghz input power range -15 +5 dbm output power 1 4 dbm sub-harmonic suppression 25 dbc input return loss 15 db output return loss 8db ssb phase noise (100 khz offset) pin= 0 dbm -142 dbc/hz supply current (icc) 52 69 ma hmc443lp4 / 443lp4e smt gaas hbt mmic x4 active frequency multiplier, 9.8 - 11.2 ghz output v04.0210
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com freq. multipliers - active - smt 5 5 - 43 output power vs. temperature @ -10 dbm drive level output power vs. supply voltage @ -10 dbm drive level output power vs. drive level input return loss vs. temperature output return loss vs. temperature smt gaas hbt mmic x4 active frequency multiplier, 9.8 - 11.2 ghz output v04.0210 -2 -1 0 1 2 3 4 5 6 7 8 9.6 9.8 10 10.2 10.4 10.6 10.8 11 11.2 11.4 +25 c +85 c -40 c output power (dbm) output frequency ( ghz ) -30 -25 -20 -15 -10 -5 0 1 1.5 2 2.5 3 3.5 4 +25 c +85 c -40 c return loss (db) frequency (ghz) -2 -1 0 1 2 3 4 5 6 7 8 9.6 9.8 10 10.2 10.4 10.6 10.8 11 11.2 11.4 vcc=4.5v vcc=5.0v vcc=5.5v output power (dbm) output frequency ( ghz ) -16 -14 -12 -10 -8 -6 -4 -2 0 8 9 10 11 12 13 14 15 +25 c +85 c -40 c return loss (db) frequency (ghz) -2 -1 0 1 2 3 4 5 6 7 8 9.6 9.8 10 10.2 10.4 10.6 10.8 11 11.2 11.4 -20 dbm -15 dbm -10 dbm -5 dbm 0 dbm +5 dbm output power (dbm) output frequency ( ghz ) hmc443lp4 / 443lp4e
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com freq. multipliers - active - smt 5 5 - 44 output spectrum ssb phase noise performance, fout= 10.5 ghz hmc443lp4 / 443lp4e smt gaas hbt mmic x4 active frequency multiplier, 9.8 - 11.2 ghz output v04.0210 -60 -50 -40 -30 -20 -10 0 10 0 2 4 6 8 101214161820222426 output power (dbm) frequency (ghz) -160 -140 -120 -100 -80 -60 -40 -20 0 10 2 10 3 10 4 10 5 10 6 10 7 pin= 0dbm pin= -10dbm ssb phase noise (dbc/hz) offset frequency (hz)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com freq. multipliers - active - smt 5 5 - 45 absolute maximum ratings outline drawing typical supply current vs. vcc vcc (v) icc (ma) 4.5 51 5.0 52 5.5 54 rf input (vcc = +5v) +20 dbm vcc +5.5v channel temperature 135 c continuous pdiss (t=85 c) (derate 7.6 mw/c above 85 c) 500 mw thermal resistance (r th ) (junction to ground paddle) 130.8 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c note: multiplier will operate over full voltage range shown above. electrostatic sensitive device observe handling precautions notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative. 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. part number package body material lead finish msl rating package marking [3] hmc443lp4 low stress injection molded plastic sn/pb solder msl1 [1] h443 xxxx HMC443LP4E rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h443 xxxx [1] max peak refl ow temperature of 235 c [2] max peak refl ow temperature of 260 c [3] 4-digit lot number xxxx package information smt gaas hbt mmic x4 active frequency multiplier, 9.8 - 11.2 ghz output v04.0210 hmc443lp4 / 443lp4e
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com freq. multipliers - active - smt 5 5 - 46 pin description pin number function description interface schematic 1, 2, 5 - 14, 17, 18, 20 - 24 n/c the pins are not connected internally; however, all data shown herein was measured with these pins connected to rf/dc ground externally. 3rfin rf input needs to be dc blocked only if there is an external dc voltage applied to rf in. 4, 15 gnd all ground leads and ground paddle must be soldered to pcb rf/dc ground. 16 rfout multiplied output. ac coupled. no external dc blocks necessary. 19 vcc supply voltage 5v 0.5v. smt gaas hbt mmic x4 active frequency multiplier, 9.8 - 11.2 ghz output v04.0210 hmc443lp4 / 443lp4e
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com freq. multipliers - active - smt 5 5 - 47 evaluation pcb item description j1 - j3 pcb mount sma connector c1 1,000 pf capacitor, 0603 pkg. u1 hmc443lp4 / HMC443LP4E x4 active multiplier pcb [2] 104610 eval board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 the circuit board used in the fi nal application should be generated with proper rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 106137 [1] smt gaas hbt mmic x4 active frequency multiplier, 9.8 - 11.2 ghz output v04.0210 hmc443lp4 / 443lp4e
|
