 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| no. 3284ltd-7625-2 june 30 , '99 liquid crystal display module technical data sx16h003-zza (note) 1. this document may, wholly or partially, be subject to change without notice. 2. all rights are reserved ; no one is permitted to reproduce or duplicate, in any from, the whole or part of this document without hitachi's permission. 3. no one is permitted to explain contents of this document to third parties without hitachi's permission. 4. hitachi will not be held responsible for any damage to the user that may result from accidents or any other reasons during operation of the user's unit according to this document, any previous reports or oral discussions. 5. circuitry and other examples described herein are meant merely to indicate the characteristics and performance of hitachi's products. hitachi assumes no responsibility for any intellectual property claims or other problems that may result from applications based on the examples described herein. 6. no license is granted by implication or otherwise under any patents or other rights of any third party or hitachi, ltd. 7. life support applications : hitachi's products are not authorized for use in life support systems.
displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 2-1/1 record of revision date sheet no. summary june 30, '99 3284ltd - 7625 -2 page 5-2/4 added specification 5.2.2 electrical characteristics resistance between terminal x1-x2 : t.b.d 400 ~ 1050 w y1-y2 : t.b.d 20 0 ~ 550 w insulance resistance x-y : t.b.d 20m min (operation voltage 25v dc) linearity added measurement condition (see note 1) 5.2.3 mechanical characteristics pen input pressure : t.b.d 80g max (15g typ) 5.2.4 optical characteristics transparency : 81% typ 80% min 3283ltd - 7625 -2 page 9-1/1 9. dimensional outline chenged dimensional outline for t/s (168.7) (165.3) 3284ltd - 7625 - 2 june 30, '99 3-1/1 3. mechanical data (1) part name (2) module size (3) dot pitch (4) number of dots (5) duty (6) lcd (7) viewing direction (8) backlight (9) power consumption (total) (10) weight (11) power supply voltage (12) touch panel sx16h003-zza 173.0(w) mm 70.0 (h) mm 8.5 max (d) mm 0.0775(w) mm 0.224(h) mm 640 3 (r,g,b)(w) 240 (h) dots 1/242 film type (negative type) 6 o'clock cold cathode fluorescent lamp (cfl) 1 (1.1w typ) except inverter (140)g typ 3.3v only resistance type displays, hitachi, ltd. sh. no. page date displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 4-1/2 4. absolute maximum ratings 4. 1 electrical absolute maximum ratings (lcm) item note 1 disp off, flm, cl1, cl2, d0 ~ d7 note 2 make certains you are grounded when handling lcm vss=0v:standard power supply for logic contrast adjustment voltage input voltage input current static electricity symbol vdd-vss vcon-vss vi ii - min 0 0 -0.3 0 - max 6.0 vdd vdd+0.3 1 - unit v v v a - comment note 1 note 2 4. 2 electrical absolute maximum ratings (touch panel) item voltage current specification (7vdc) (max) (35ma) (max) note displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 4-2/2 4. 3 environmental absolute maximum ratings item note 1 ta < 40 c : 85%rh max. ta>40 c : absolute humidity must be lower than the humidity of 85%rh at 40 c. note 2 ta at -20 c ---------- <48h, at 60 c ---------- <168h note 3 background color changes slightly depending on ambient temperature. this phenomenon is reversible. note 4 when lcm will be operated at 5c. the life time of cfl will be reduced need to make sure of value of il and characteristics of inverter, also the response time at 5c will be slower. note 5 this module should be operated normally after finish the test. note 6 the module has not mounting hole. it should be fixed by the may of sandwiching-like method. (fig.1) ambient temperature humidity vibration shock corrosive gas operating min 5 c note 1 - - not acceptable max 40 c 2.45 m/s 2 (0.25g) 29.4 m/s 2 (3g) storage min -20 c note 1 - - not acceptable max 60 c 11.76 m/s 2 (1.2g) 490 m/s 2 (50g) note 5 note 5 comment note 2, 3, 4 without condensation 1 hour max note 6 xyz directions 11ms note 6 lcm supporting material base lcm rubber fig. 1 3284ltd - 7625 - 2 june 30, '99 5-1/4 5. electrical characteristics 5. 1 electrical characteristics of lcd item vss=0v power supply voltage vdd vcon vi i dd icon(note5) iin (note2) vcon fflm contrast adjustment vdd-vss=3.3v - "h" level "l" level vdd-vss=3.3v vcon=0.8 ~ 2.8v vin=vddorvss ta= 5 c, f= 0 ta=25 c, f= 0 ta=40 c, f= 0 - voltage (note 1) input voltage for logic circuits (note 2) power supply current (note 4) input leak current contrast adjustment voltage (note 6) frame frequency (note 7) symbol condition min typ max unit 3.15 0.8 0.8vdd 0 - - - (1.5) - - 6 0 3.30 - - - (20) - - (2.0) (2.0) (2.0) 7 0 3.45 2.8 vdd 0.2vdd (30) (20) 1.0 - - (2.5) 8 0 v v v ma v hz m a (note 1) in proportion as the vcon voltage decrease the brightness will increase. (note 2) disp off, flm, cl1, cl2, d0 ~ d7 (note 3) fflm=70hz, ta=25 c, display pattern:checker pattern. (note 4) rush current of power on : 1a(pk) 1ms + 0.15a(pk) 20ms (note 5) vcon (note 6) recommended contrast adjustment voltage fluctuates about 0.3v by each module. temperature compensation circuit is included in lcm. (only typ values) (note 7) need to make sure of flickering and rippling of display when setting the frame frequency in your set. displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 5-2/4 5. 2 electrical characteristics of touch panel item operating voltage operating current specification 5vdc 10 ~ 25ma 5.2.1 operating condition item resistance between terminal insulance resistance specification 20 0 ~ 5 50 w 5.2.2 electrical characteristics linearity chattering x1-x2 y 1-y2 x-y x y 400 ~ 1050 w 20m w min 1.5% max 1.5% max 10msec max operating voltage 25v dc condition see note 1 note item pen input pressure surface hardness specification 2h min 5.2.3 mechanical characteristics 80g max (15g typ) note jis k 5400 item transparency specification 5.2.4 optical characteristics 80% min note displays, hitachi, ltd. sh. no. page date displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 5-3/4 in fig.1, when the dc5v is impressed between the "x" directional electrode and "y" directional of table alternatery, the voltage between the depressed point and the reference surface shall be the output voltage (eox and eoy). as shown in fig.2, measure the point on 10mm grid enclosed by the positions "a" and "b", which are located at the inside of visible area the specified distance away from the edge, has been depressed. when the output voltage corresponding to every measurement position is plotted as shown in fig.3, the difference between the voltage enclosed by the positions "a" and "b" and the output voltage at the same position shall be " d ex" (or " d ey") and the electric potential difference "eabx" (or "eaby") between "a" and "b" shall be defined as the linearity. linecarity of transparent table (x)=( d ex/eabx) 100% linecarity of transparent table (y)=( d ey/eaby) 100% note 1 : definition of linearity transparent enductive layer "y" axis "x" axis busber 5v < fig.1 > < fig.2 > 10mm e bx e a x a b measuring position d ex measured value e by e a y a b measuring position d ey measured value < fig.3 > a measured value shall be a maximum value in absolute value tolerance when evey point on a grid shown in fig.4 has been pressed. < hitting conditions > measurement of linearity load : 80g measuring jig : 0.8 rresin pen measuring area : 15 6 < fig.4 > 3284ltd - 7625 - 2 june 30, '99 5-4/4 5. 3 electrical characteristics of backlight item (note 1) please design your lamp driving circuit (inverter) according to the above specifications, and inform hitachi of it. (note 2) starting discharge voltage is increased when lcm is operating at lower temperature. please check the characteristics of your inverter before applying to your set. (note 3) average life time of cfl will be decreased when lcm is operating at lower temperature. (note 4) under lower driving frequency of an inverter, a certain backl ight system (cfl & cfl reflection sheet) may generate a sound noise. before designing the inverter, please consider the driving frequency and the noise. (note 5) when il is over 3.0ma, it may cause uneven contrast near cfl location, due to heat dispersion from cfl. (note 6) absolute maximum ratings voltage of cfl cable for this module is as follows. vcfl side : 2kv vss side : 300v this inverter design shall not exceed the rated voltage. (note 7) we suggest that the lamp current can not be lower than the standard of cas set, or it will cause low brightness. lamp voltage frequency lamp current (1lamp) (note7) starting discharge voltage symbol vl fl il vs (note 2) min - - (0.7) (1400) typ (560) (60) - (1.9) max - - (3.0) - unit vrms khz vrms ma note ta=25c ta=25c ta=5c displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 6 -1/3 6.1 optical characteristics of lcd 6. optical characteristics item ta=25 c (backlight on) (measurement condition : hitachi standard) note 1) ~ 7) : see next page. viewing area contrast ratio response time (rise) response time (fall) color tone (primary color) symbol f 2- f 1 k tr tf x y red x y x y x y green blue white condition q =0 , k > 2.0 f =0 , q =0 f =0 , q =0 f =0 , q =0 f =0 , q =0 min - - - - - - - - - - - - typ (40) (30) (250) (200) (0.55) (0.34) (0.29) (0.55) (0.17) (0.22) (0.29) (0.37) max - - - - - - - - - - - - unit deg - ms ms - - - - - - - - note 1),2) 3),5),6) 4) 4) 7) displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 6-2/3 note 1. definition of q and f (normal) viewing direction note 3. definition of contrast "k" note 2. definition of viewing angle f 1 and f 2 x y ( q =180 ) y' ( q =0 ) x' z f 1 f 2 q k = brightness on non-selected area (b2) brightness on selected area (b1) k 2.0 f 1 f 2 f 1<0 < f 2 contrast ratio k vs viewing angle f f f =0 sensor back light brightness : bm-7 aperture : 1 distance : 0.4m note 4. definition of optical response time note 5. hitachi will not do 100% inspection for minimum value. minimum value is for reference. note 6. hitachi will do sampling inspection for minimum value. note 7. the lcd driving voltage should be adjusted at the voltage where the peak contrast is obtained. non-selective state selective state non-selective state 100% 90 % 1 0 % tr rise time tf fa ll time displays, hitachi, ltd. sh. no. page date b1 b2 operation voltage (b1) (di="h") (b2) (di="l") f =0 ,q =0 3284ltd - 7625 - 2 june 30, '99 6-3/3 6.2 optical characteristics of backlight item note typ max unit min brightness rise time brightness uniformity - - - (60) 5 - - - 30 cd/m 2 minute % (il=1.9ma) note 1),2) il=1.9ma brightness 80% undermentioned note 1),3) measurement condition : hitachi standard) cfl : initial, ta=25 c display data should be all "on" the lcd driving voltage should be adjusted at the voltage where the peak contrast is obtained, when set pattern is all "q". (note 1) measurement after 10 minutes from cfl operating. average value of 9 points (note 3). (note 2) brightness control : 100% (note 3) measurement of the following 9 places on the display. x=40 x=120 x=200 p1 p4 p7 p2 p5 p8 p3 p6 p9 y=320 y=960 y=1600 (note 4) definition of the brightness tolerance. max brightness or min brightness - average brightness average brightness 100 displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 7-1/1 7. block diagram displays, hitachi, ltd. sh. no. page date cn2 vcfl vss cfl buffer power supply circuit lcd panel column driving circuit x1 x240 timing circuit buffer cn1 flm cl1 cl2 disp off d0~d7 vdd vss vcon 3284ltd - 7625 - 2 june 30, '99 8 -1/6 8. interface timing chart 8.1 timing chart displays, hitachi, ltd. sh. no. page date flm cl1 cl2 d7 d6 d0 cl1 flm r b g y1 y9 y1917 g r b y2 y10 y1918 r b g y7 y15 y1919 g r b y8 y16 y1920 d1 x1 x2 x240 dummy data x239 (reduction) (242+n) t x1 x2 dummy data d0~d7 t 30ns min 30ns min 3284ltd - 7625 - 2 june 30, '99 8 -2/6 8.2 interface timing specification item symbol min typ max unit ns ns ns ns ns ns ns ns ns ns 30 100 50 100 6 0 30 4 0 2 0 80 2 0 twhcl1 tcyc twcl2 tscl1 thcl1 tr, tf tdsu tdh tfs tfh cl1 pulse width "h" clock cycle time cl2 pulse width clock set up time clock hold time clock rise fall time data set up time data hold time "flm" set up time "flm" hold time vdd=3.3 0.15v, vss=0v, vcon=0.8~2.8v, ta=+5 c ~+40 c 0.9vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd measurement point 0.9vdd 0.1vdd do~d7 cl2 cl1 flm tfh tfs twhcl1 tr tf twhcl2 tr tf tscl1 thcl1 twcl2 tcyc tdh tdsu 0.1vdd displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 8 -3/6 8.3 power on / off sequence symbol min max unit m s m s m s ns ns m s m s m s m s 10 0 200 200 0 0 0 20 2 0 tdld tch tldh tdor tdof tdlcr tdlcf tdlcs tvh comment (note 1) (note 2) 10 0 (note 1) please keep the specified sequence because wrong sequence may cause permanent damage to the lcd panel. (note 2) hitachi recommends you to use disp off function. display quality may deteriorate if you don't use disp off function. vdd tdld tdld tch tch tdlcr tdlcf tdlcs tdlcs tldh tldh tdor tdof tvh cl1 vcon disp off 3.15v 3.15v 0.8 vdd 0.8 vdd 0.8 vdd 0.2 vdd displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 8.4 power supply for lcm vcfl vss cfl vcon vdd vss c2 + - +3.3v c1 + - stabilized +3.3v r1 r2 vr lcm displays, hitachi, ltd. sh. no. page date 8 -4/6 displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 8 -5/6 8.5 input data allocation table data signal y x 1 2 3 4 5 138 139 140 141 142 143 144 145 238 239 240 d 7 d 6 d 5 d 4 d 3 d 2 d 1 d 0 d 7 d 6 d 5 d 4 d 4 d 3 d 2 d 1 d 0 1 2 3 4 5 6 7 8 9 10 11 12 1 9 1 6 1 9 1 7 1 9 1 8 1 9 1 9 1 9 2 0 r r r r r r r r r r r r r r r r g g g g g g g g g g g g g g g g b b b b b b b b b b b b b b b b r r r r r r r r r r r r r r r r g g g g g g g g g g g g g g g g b b b b b b b b b b b b b b b b r r r r r r r r r r r r r r r r g g g g g g g g g g g g g g g g b b b b b b b b b b b b b b b b r r r r r r r r r r r r r r r r g g g g g g g g g g g g g g g g b b b b b b b b b b b b b b b b g g g g g g g g g g g g g g g g b b b b b b b b b b b b b b b b r r r r r r r r r r r r r r r r g g g g g g g g g g g g g g g g b b b b b b b b b b b b b b b b r : red g : green b : blue displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 8 -6/6 8.6 internal pin connection cn1 hirose : fh12a-24s-0.5sh (suitable fpc : t0.3 0.05mm, 0.5mm pitch) pin no. signal level function 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 flm vss cl1 vss cl2 vdd vss d0 d1 d2 d3 d4 d5 d6 d7 vdd vcon vss y2 x1 y 1 x 2 h first line marker h : on / l : off gnd power supply for logic contrast adjust gnd analog signal form digitizer - - - - h / l - h / l h / l - - - - h l h l gnd data latch gnd data shift power supply for logic gnd display data cfl jst housing : bhr-02vs-1 (suitable connector : jst sm02(4.0)b-bhs-1) contact pin : sbh-001t-p0.5 pin no. signal level function 1 2 vss vcfl - gnd for cfl - power supply for cfl disp off vss display data 3284ltd - 7625 - 2 june 30, '99 10-1/4 10.1 appearance inspection condition visual inspection should be done under the following condition. (1) the inspection should be done in a dark room. (2) the cfl should be lighted with the prescribed inverter. (3) the distance between eyes of an inspector and the lcd module is 25cm. (4) the viewing zone is shown the figure. viewing angle < 25 10. appearance standard 10.2 definition of zone a zone : the effective display area specified at page 9-1/1 of this document. b zone : area between the dots display area and the effective display are (a zone) line specified at page 9-1/1 of this document. 25 eye 25 eye lcd bezel dots area effective display area a zone b zone displays, hitachi, ltd. sh. no. page date 10.3 appearance specification (1) lcd appearance *) if the problem related to this section occurs about this item, the responsible persons of both party (customer and hitachi) will discuss the matter in detail. item distinguished one is not acceptable (to be judged by hitachi standard) same as above same as above average diameter d (mm) d < 0.2 0.2 < d < 0.3 0.3 < d < 0.5 0.5 < d maximum acceptable number ignored 12 3 none filamentous (line shape) l < 2.0 l < 3.0 l < 2.5 0.03 < w < 0.05 0.05 < w < 0.1 w < 0.03 length l (mm) width w (mm) maximum acceptable number ignored 6 1 round (dot shape) maximum acceptable number average diameter d (mm) minimum space 0.2 < d < 0.3 d < 0.2 0.3 < d < 0.4 0.4 < d the total number ignored 10 5 none 10 mm 3 0 mm filamentous + round = 10 those wiped out easily are acceptable criteria applied zone to be judged by hitachi standard same as above a a a, b a, b a a a a scratches no. dent wrinkles in polarizer bubbles stains, foreign materials dark spot color tone color uniformity l c d 3284ltd - 7625 - 2 june 30, '99 10-2/4 displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 10-3/4 item d < 0.25 0.25 11. precaution in design 11. 1 mounting precaution 3284ltd - 7625 - 2 june 30, '99 11-1/3 (1) when assembling the touch panel and your case, please refer to the figure below. 11.3 power on sequence input signals should not be applied to lcd module before power supply voltage is applied and reaches to specified voltage (3.0 0.15v). if the above sequence is not kept, c-mos lsis of lcd module may be damaged due to latch up phenomenon. 11.4 handling precautions (1) since the polarizer on the top, and the aluminum plate on the bottom tend to be easily damaged, they should be handled with full care so as not to get them touched, pushed or rubbed by a piece on glass, tweezers and anything else which are harder than a pencil lead 3h. (2) as the adhesives used for adhering upper/lower polarizers and aluminum plate are made of organic substances which will be deteriorated by a chemical reaction with such chemicals as acetone, tuluene, ethanole and isopropylalcohol. the following solvents are recommended for use : normal hexane please contact us when it is necessary for you to use chemicals other than the above. 11.2 precautions against electrostatic discharge as this module contains c-mos lsis, it is not strong against electrostatic discharge. make certain that the operator's body is connected to the ground through a list band etc. and don't touch i/f pins directly. (2) the clearance between the touch panel and the case shall be designed so that the case edge never presses the input screen when it is deformed by heat or other causes. (3) the case shall be designed not to touch the tail portion (fpc for touch panel). lcm case tape touch panel case cushion insulated area (>2.0) effective area transparent area case opening displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 11-2/3 (3) lightly wipe to clean the dirty surface with absorbent cotton or other soft material like chamois, soaked in the recommended chemicals without scrubbing it hardly. always wipe the surface horizontally or vertically. never give a wipe in a circle. to prevent the display su rface from damage and keep the appearance in good state, it is sufficient, in general, to wipe it with absorbent cotton. (4) immediately wipe off saliva or water drop attached on the display area because it may cause deformation or faded color. (5) fogy dew deposited on the surface may cause a damage, stain or dirt to the polarizer. when you need to take out the lcd module from some place at low temperature for test, etc. it is required to be warmed them up to be temperature higher than room temperature before taking them out. (6) touching the display area or i/f pins with bare hands or contaminating them are prohibited, because the stain on the display area and poor insulation between terminals are ofte n caused by being touched with bare hands. (some cosmetics are detrimental to polarizers.) (7) in general, the glass is fragile so that it, especially on its periphery, tends to be cracked or chipped in handling. please do not give the lcd module sharp shocks caused by falling etc. (8) maximum pressure to the surface must be less than 1.96 10 4 pa (0.2kgf/cm 2 ). and if the pressure area is less than 1cm 2 , maximum pressure must be less than 1.96n (0.2kgf). (9) since the metal width is narrow on these locations (see page 9-1/2), please be careful with handling. (10) top sheets shall be cleaned gently using a soft cloth such as those used for glasses. hard wiping accumulated dust will leave scars on the surface even using a cloth. 11.5 operation precaution (1) using a lcm module beyond its maximum ratings may result in its permanent destruction. lcm module's should usually be used under recommended operating conditions shown in chapter 5. exceeding any of these conditions may adversely affect its reliability. (2) response time will be extremely delayed at lower temperature than the specified operating temperature range and on the other hand lcd's shows dark blue color at higher temperature. however those phenomena do not mean defects of the lcd module. those phenomena will disappear in the specified operating temperature range. (3) if the display area is pushed hard during operation, some display patterns will be abnormally displayed. displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 11-3/3 displays, hitachi, ltd. sh. no. page date (4) a slight dew depositing on terminals may cause electrochemical reaction which leads to terminal open circuit. please operate the lcd module under the relative condition of 40 c 85%rh. (5) resistance renge : your controller shall be set up to allow the resistance range of touch panel specified in our cas. (6) pointed position of touch panel may shift owing to a change in resistance of touch panel depending on the operation condition. to compensate this shift, the set shall be given a calibration function. (7) input shall be made with a stylus pen (polyacetal, r0.8). chances are very high that use of a metal piece including a ball point pen or sharp edge will impair accuracy. (8) the touch panel is an auxiliary input device. the system shall be designed to have other input device. 11.6 storage in case of storing lcd module for a long period of time (for instance, for years) for the purpose of replacement use, the following precautions necessary. (1) store the lcd modules in a dark place ; do not expose them to sunlight or ultraviolet rays. (2) keep the temperature between 10 c and 35 c at normal humidity. (3) store the lcd modules in the container which is used for shipping from us. (4) no articles shall be left on the surface over an extended period of time. 11.7 safety the lcd modules include cold cathode fluorescent lamp (cfl). cfl contains a small amount of mercury. please follow local ordinances or regulations for disposal. wear finger cots or gloves whenever handling or assembling a touch panel because its glass edges are sharp. 3284ltd - 7625 - 2 june 30, '99 12-1/2 12.1 lot mark lot mark is consisted of 4 digits for production lot and 6 or 7 digits for production control. 12. designation of lot mark year figure in lot mark 1999 2000 2001 2002 2 1 0 9 9 0 4 1 week month year digits for production control week figure in lot mark 1 ~ 7 4 3 2 1 (day in calender) 5 8 ~ 14 15 ~ 21 22 ~ 28 29 ~ 31 month figure in lot mark jan. 01 month figure in lot mark feb . 02 mar . 03 apr . 04 may 05 june 06 july 07 aug . 08 sep . 09 oct . 10 nov. 11 dec. 12 displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 12-2/2 12.2 revision rev no. item lot no. production control no. a 00001 ~ 12.3 location of lot mark either label a or label b is being attached on the back side of lcm. label a sx16h003-zza 9041tn00001 warning high voltage rev. made in lot no. production control no. rev no. note 1 label b note 1 : japan or taiwan sx16h003-zza 9041tn00001 rev. made in lot no. production control no. rev no. note 1 warning high voltage 52 00 0h 6 k 1 1 200001 displays, hitachi, ltd. sh. no. page date 3284ltd - 7625 - 2 june 30, '99 13-1/1 13. precaution for use (1) a limit sample should be provided by the both parities on an occasion when the both parties agree to its necessity. judgment by a limit sample shall take effect after the limit sample has been established and confirmed by the both parties. (2) on the following occasions, the handling of the problem should be decided through discussion and agreement between responsible persons of the both parties. (1) when a question is arisen in the specifications. (2) when a new problem is arisen which is not specified in the specifications. (3) when an inspection specification change or operating condition change by customer is reported to hitachi, and some problem is arisen in the specification due to the change. (4) when a new problem is arisen at the customer's operating set for sample evaluation (3) regarding the treatment for maintenance and repairing, both parties will discuss it in six month later after latest delivery of this product. the precaution that should be observed when handling lcm have been explained above. if any points are unclear or if you have any requests, please contact hitachi. displays, hitachi, ltd. sh. no. page date |
Price & Availability of SX16H003ZZA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |