spec no: dsai9804 rev no: v.3 date: apr/02/2009 page: 1 of 7 approved: wynec checked: allen liu drawn: s.m.wu erp : 1201004515 3.5x2.8mm surface mount smd chip led preliminary spec attention observe precautions for handling electrostatic discharge sensitive devices part number: AAAF3528QBFSEJ3ZGW blue hyper red green features z outstanding material efficiency. z low power consumption. z can produce any color in visible spectrum, including white light. z suitable for all smt assembly and solder process. z available on tape and reel. z package: 1500pcs / reel . z moisture sensitivity level : level 4. z rohs compliant. description the blue source color devices are made with algainn on al 2 o 3 substrate light emitting diode. the hyper red device is based on light emitting diode chip made from algainp. the green source color devices are made with ingan on sapphire light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti-electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3.specifications are subject to change without notice. 4.the device has a single mounting surface. the device must be mounted according to the specifications. red
spec no: dsai9804 rev no: v.3 date: apr/02/2009 page: 2 of 7 approved: wynec checked: allen liu drawn: s.m.wu erp : 1201004515 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 the optical centerline value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 AAAF3528QBFSEJ3ZGW blue (algainn) white diffused 110 200 hyper red (algainp) 900 1700 green (ingan) 480 900 120 symbol parameter device typ. max. units test conditions peak peak wavelength blue hyper red green 461 640 515 nm i f =20ma d [1] dominant wavelength blue hyper red green 465 625 525 nm i f =20ma ? 1/2 spectral line half-width blue hyper red green 25 25 30 nm i f =20ma c capacitance blue hyper red green 100 27 45 pf v f =0v;f=1mhz v f [2] forward voltage blue hyper red green 3.3 2.2 3.3 4 2.8 4.1 v i f =20ma i r reverse current blue hyper red green 10 10 10 ua v r =5v parameter blue hyper red green units power dissipation 120 140 123 mw dc forward current 30 50 30 ma peak forward current [1] 150 150 150 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsai9804 rev no: v.3 date: apr/02/2009 page: 3 of 7 approved: wynec checked: allen liu drawn: s.m.wu erp : 1201004515 AAAF3528QBFSEJ3ZGW blue
spec no: dsai9804 rev no: v.3 date: apr/02/2009 page: 4 of 7 approved: wynec checked: allen liu drawn: s.m.wu erp : 1201004515 hyper red
spec no: dsai9804 rev no: v.3 date: apr/02/2009 page: 5 of 7 approved: wynec checked: allen liu drawn: s.m.wu erp : 1201004515 green
spec no: dsai9804 rev no: v.3 date: apr/02/2009 page: 6 of 7 approved: wynec checked: allen liu drawn: s.m.wu erp : 1201004515 AAAF3528QBFSEJ3ZGW reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) tape dimensions (units : mm)
spec no: dsai9804 rev no: v.3 date: apr/02/2009 page: 7 of 7 approved: wynec checked: allen liu drawn: s.m.wu erp : 1201004515 packing & label specifications AAAF3528QBFSEJ3ZGW
|
