|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
to : specification of fujitsu tft-lcd module FLC26XGC6R approval this product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, person al use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter ?high safety requir ed use?), including without limita tion, nuclear reaction control in nuclear facility, aircraft flight control, air traffic cont rol, mass transport control, medical life support system, missile launch control in weapon system. if customer?s product possibly falls under the category of high safety required use, please consult with our sales representatives in charge before such use. in addition, fdtc shall not be liable against the customer and/or any third party for any claims or damages arising in connection with the high safety required use of the product without permission . specification no. : tech bes lcd-00185 issue date : jan. 31, 2003 issued by : f.yamada fujitsu display technologies corporation date by tentative www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
? 1 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative revision history revision date prepared checked approved summary 01a jan. 31, 2003 s.hayashimoto f. ya m a d a 1st issue ? 31 20030131 s.hayashimoto f. ya m a d a www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 2 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative table of contents 1 ?d applications 2 } product name and model name 2-1.product name 2-2.model name 3 ?d overview 4 ?d configuration 5 ?d mechanical specifications 6 ?d absolute maximum rating 7 ?d recommended operating conditions 8 ?d electrical specifications 9 ?d optical specifications 10 } interface specifications 10-1.signal descriptions and data assignment of lvds 10-2.digitizer sensor board interface 10-3. color data assignment 10-4. input signal timing 10-5. correspondence between data and display position 10-6.power supply sequence 10-7.shut down time 11 } front-light specifications 11-1.pin configuration for front-light 11-2.cold cathode fluorescent tube specification 11-3.life 12 } appearance specifications 12-1.zone 12-2.bright spots 12-3.test condition 12-4.specification 13 ?d environmental specifications 14 ?d indications 15 } packaging 16 ?d warranty 17 } precautions 18 } precautions for use 19 } miscellaneous 3 3 3 3 3 4 5 5 6 8 13 14 16 16 17 18 20 20 21 21 21 21 21 22 22 22 22 22 24 25 25 26 26 29 29 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 3 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative 1. application this specification is applied to the 10.4-inch xga supported tft-lcd module. 2 ?d product name and model name 2?1 product name : lcd module 2?2 model name : ?e?k?b?q?u?w?f?b?u?q 3. overview this lcd module has a tft active matrix type liquid crystal panel 1024x ?r?i rgb ?j?? 768 pixels, and diagonal size of 26cm. this lcd has a rgb interface for xga and can display 262,144 colors under non-interlaced mode. this lcd module can display under the bright ligh t very clearly, also can display plainly in the dark place due to the front light. it has built-in edge type front-light with 1 ccfl which is driven by external inverter for this front-light. the power supply of this lcd module is +3.3v dc ?????????????? . (it is not included with the power source for front lig ht and digitizer unit.) the timing control signal consists of data-enab signal only. it is possible to display freely within regulation. the interface uses ?k?u?c?r interface. this lcd module installs the digitizer unit of electromagnetic induction tablet device. 4. configuration this lcd module consists of a reflected color tft-lcd pane l on which tft driver ics are mounted, a bezel, a ccfl front-light, digitize r unit for tablet device, and lvds interface pcb. the inverter for the front-light is not included. figure 4-1 shows a block diagram of this lcd module. ? ? www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 4 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative ? ? ? 0.<9, ? ? ? ? ? ? 36*2 ?0(.9(4 ? 5. mechanical specifications table 5-1 shows the mechanical specifications of this lcd module. table 5-1 mechanical specifications item specifications unit remark dimensions 235.6 x 173.2 x 6.8 mm display resolution (1024 x 3) x 768 ? display dot area 210.432 x 157.824 mm dot pitch (0.0685 x 3) x 0.2055 mm ?o???????? aspect ratio 1:1 ? weight 330 max ?? edge type front-light is used. ( ? 1.8 ccfl x 1) without inverter. for details on dimensions, see dimensional outline drawing. (at page 32,33,34:figure 19-1,2,3) fg ?| sg short ? ?i separated ?j lvds circuit interface circuit ?c?b / ?c?b converter bias supply data driver color tft-lcd pannel 1024?~3(rgb)?~768 5=,9;,9 ?*09*<0; gate driver 65;963 ?:0.5(3 ? ? ?57<; e ? ? ? ?? ? ? ? ? ? power supply ? ?{?r?d?r?u ?c?b dc front light ?i ccfl ?j digitizer unit digitizer controller interface circuit. 0.0;0a,9 ? 65;963 ?:0.5(3 ? www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 5 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative 6. absolute maximum rating table 6-1 shows the absolute maximum rating of this lcd module. table 6-1 absolute maximum rating item symbol condition min. typ. max. unit supply voltage (3.3v) v cc ta=25oc ?0.3 ? 4.0 v input signal voltage(lvds) v in ?0.3 ? vcc+0.3 v 7. recommended operating conditions table 7-1 shows the recommended operating conditions of this lcd module. table 7-1 recommended operating conditions item symbol min. typ. max. unit supply voltage v cc 3.0 3.3 3.6 v ripple voltage (vcc) + rp ? ? 100 mv www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 6 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative 8. electrical specifications table 8-1 shows the electrical specifications of this lcd module. figure 8-1 shows the measurement circuit. figure 8-2 shows the equiva lent circuit of the logic signal input area. table 8-1 electrical specifications item symbol condition min. typ. max. unit differential-input voltage (+) + ih ? ? 100 mv differential-input voltage ( ) + il + cm=+1.2v 100 ? ? mv supply current cc ? 195 325 ma supply rush current s cc ? ? 1.7 a supply rush current duration (excess 1.2a) ) s cc v cc =+3.3v v ss =0v ta=25 ? ck=65mhz frame frequency =60hz ? ? 1 ms ccfl turn on voltage + s f l =65khz,ta=25 ? c l =22pf ? 1100 1200 vrms f l =65khz,ta=0 ? ? ? 1200 vrms lighting voltage + l f l =65khz,i l =5marms ? 630 ? vrms lighting frequency 50 65 80 khz recommended lighting frequency 5 l v l =630vrms, i l =5ma ? ? ? khz front light tube current l v l =630vrms f l =65khz 4.0 5.0 6.0 marms measurement circuit is based on figure 8-1. figure 8-1 measurement circuit logic analog driver dc/dc converter v cc gnd a c gnd icc ?h l lcd module v cc c l v s front-light v l www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 7 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative figure 8-2 equivalent circuit of logic signal input lvds receiver differential in p ut 100 in0 in1 in2 clkin ds90cr583(national semiconductor) or equivalent in0 in1 in2 clkin internal circuit fuse gnd v cc fg ?i frame ground ?j beads 100pf 4.7 f 2 fuse?????..kab3202102na29 1.0a ? ? ? ? ? ? ? ? ? ? (matsuo electric co., ltd.) or equivalent beads.?.???.mpz2012 s331a t000 (tdk co., ltd.) or equivalent internal circuit 1.0a ?i 0 ???j 1 f 2 0.1 f 10 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 8 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative 9. optical specifications table 9-1 shows the optical specif ications of this lcd module. table 9-1 optical specifications specification item symbol condition min. typ. max. unit front light note 55 ?\ ?\ ?n?e?e 4,6,8,10 horizontal visual angle ?? ?k?c?q ?? ?t?c?c = 0?? 45 ?\ ?\ ?n?m 1,2,6,7,8,10 55 ?\ ?\ ?n?e?e 4,6,8,10 ?? ?t 70 ?\ ?\ ?n?m 1,2,6,7,8,10 55 ?\ ?\ off 4,6,8,10 vertical visual angle ?? ?c cr???q ?? ?k?c?q = 0?? 40 ?\ ?\ deg on 1,2,6,7,8,10 ?? ?k?c?q?c?t?c?c ??0?? ?? s ??25?? (30) 40 ?\ ?\ ?n?e?e 3,6 contrast ratio ?b?q ?? ?k?c?q?c?t?c?c ??0?? (16) 18 ?\ ?n?m 1,2,6,8,10 ta=25?? ?| 15 30 ???? response time (on) ?ib?w?j ?? ???? ?? ?k?c?q, ?t?c?c =0?? ta=0?? ?| 50 100 ???? ta=25?? ?| 10 25 ???? response time (off) ?iw?b?j ?? ?????? ?? ?k?c?q, ?t?c?c =0?? ta=0?? ?| 50 100 ???? on 1,2,6,9,10 reflectivity r ?? ?k?c?q?c?t?c?c ??0?? ?? s ??25?? (13) 15 ?\ ?? ?n?e?e 3,6 brightness i (30) 35 cd/m 2 ?n?m 1,2,6 brightness uniformity ??h 65 ?\ ?\ ?? ?n?m 1,2,6,12 ?\ (0.32) ?\ ?| off 5 ?? (0.283) 0.313 (0.343) ?| on 1,2,6 ?\ (0.35) ?\ ?| off 5 w ?? (0.299) 0.329 (0.359) ?| on 1,2,6 ?| off 5 r ?i0.45?c0.31?j typ. on 1,2,6 ?| off 5 g ?i0.32?c0.41?j typ. on 1,2,6 ?| off 5 chromaticity r g b ???c?? ?? ?k?c?q?c?t?c?c =0?? ?u ?b?b =3.3v, ?h ?k =5marms b ?i0.21?c0.24?j typ. on 1,2,6 lcd panel type ?s?e?s color display mode normally black ?u?` pannel technology ?l?u?`-r none off optimum viewing angle top (12 o?fclock direction) on 11 display color ?q?u?q?c?p?s?s?i6-bit color?j surface treatment none (front-light prism surface) ?e specified value is measured in 15 ?` 20 minutes after lighting on. ?e all items without ?brightness uniformity? are measured at the center of display board. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 9 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative note 1) brightness is measured by cs-1000 ?i minolta co., ltd. ?j , bm-5a ?i topcon co., ltd. ?j ,or equivalent. field ???q???c interval ?? 500 ???? note 2) this lcd module?s specifications of visual angle, contrast ratio, brightness, brightness uniformity, and chromaticity are measured in the dark condition (under 1lu??). note 3) definition of reflectivity all-directional ring light irradiation it is measured by cm-512m3?i minolta co., ltd. ?j or equivalent. ?x ?{ top ?i12 o ? clock direction?j ?k?b?c module ?w ?| left (?x o ? clock direction) ?x ?| bottom (6 o ? clock direction) ?w ?{ right ?i3 o ? clock direction?j *?o?? ?? s illumination light (ring light source) www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 10 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative note 4) measuring method of reflective viewing angle note 5) measuring method of chromaticity at reflection it is measured by lcd-7000 all-directional diffusion irradiation (otsuka electronics co., ltd) it is measured by cm- 2022(minolta co., ltd). note 6) definition of viewing angle (1) based on figure 9-2. ??? ?? u ???o???c?? d ???o???c?? l ???o???c?? r ???o?? figure 9-2 definition of viewing angle (1) *0 ?? (front) ?? u y+ top (12 o?clock direction) lcd module x- left (9 o?clock direction) y- bottom (6 o ? clock direction) x+ right (3 o?clock direction) ?? ?c ?? ?k ?? ?q ?6+<3, ? lens light source ?6+<3, ? lens light d 65 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 11 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative note 7) definition of viewing angle (2) based on figure 9-3. figure 9-3 definition of viewing angle (2) note 8) definition of contrast ratio (cr) determined by formula (1) based on figure 9-4 voltage-brightness characteristics. ?k w (brightness at white) = ?k ?a (brightness at black) ?c?c (1) 0 figure 9-4 voltage-brightness characteristics note 9) definition of response time based on figure 9-5. figure 9-5 definition of response time display surface dis p la y surface panel drive voltage ?m?u?n brightness ?m l ?n white l b 0 black l w ?? max ?? typ ?? min ?? l,r,u,d =0?? drive signal of lcd panel non-select status ? select status non-select status 3(*2 ? ?? on ?? off ? ?,:765:, ?;04, off response time /0;, ? black ? ? ? ? ? relative brightnes ? ? www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 12 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative note 10) contrast ratio and response measurement system based on figure 9-6. figure 9-6 contrast ratio and response time measurement system note 11) definition of optimum viewing angle figure 9-7 definition of viewing angle drive and measurement system y + y - x + z + z - x - brightness meter or luminance colorimeter (with luminosity correction function) ?? 10 ?i - ?j ?i + ?j 0 6 o?clock ?? v iewing angle ?? ? 12 o?clock max contrast ratio www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 13 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative note 12) definition of brightness uniformity brightness uniformity is defi ned by the following formula. brightness art measured at the following 9 points ( ?@?`?h ) on the display area that is shown in figure 9-8. brightness uniformity ?f ?o?imin. brightness ?@?`?h?j?^?ima x. brightness ?@?`?h?j?p?~?p?o?o?m???n note) each measurement point ( ?@?`?h ) defines the center spot of view of brightness meter. the tolerance of measurement position is ?} 3mm. figure 9-8 measurement points 10. interface specifications ? ? ? ? ? ? ? ? ? dot ? ? ? ? ? ? y ? cn-1 lcd interface cn-2 power source of front light cn-3 digitizer unit interface ? ? ? ? ? t ? ? it shows from backside. 1 14 cn-1 cn-3 cn-2 1 14 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 14 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative 10-1 signal descriptions and data assignment of lcd table 10-1 shows the signal description of lcd (cn1). table 10-2 shows the lvds data assignment. table 10-1 interface signals (cn1) pin no. symbol function 1 vcc ? 3.3v power supply 2 vcc 3.3v power supply 3 vss gnd 4 vss gnd 5 ?h?m?o?| lvds signal ?h?m?o?| 6 ?h?m?o?{ lvds signal ?h?m?o?{ 7 ?h?m?p?| lvds signal ?h?m1?| 8 ?h?m?p?{ lvds signal ?h?m?p?{ 9 ?h?m?q?| lvds signal ?h?m?q?| 10 ?h?m?q?{ lvds signal ?h?m?q?{ 11 ?b?k?j?h?m?| lvds signal clkin ?| 12 ?b?k?j?h?m?{ lvds signal clkin ?{ 13 ?u?r?r gnd 14 ?u?r?r gnd ? connector : ?c?e?p?x?k?|?p?s?o?|?p?g ? conformed connector : ?c?e?p?x?f?|?p?s?r?|?p?b producer : hirose electric co., ltd. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 15 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative table 10-2 lvds data assignment transmitter pin assignment input from graphic contoller output to lcd module graphic controller input signal pin no. sn75lvds84 (ti) ds90cr563 (ns) pin no. sn75lvds84 (ti) ds90cr563 (ns) lcd connector pin assignment red 0 (lsb) 44 d0 txin0 red 1 45 d1 txin1 red 2 47 d2 txin2 red 3 48 d3 txin3 41 y1m txout0?| 5 (in0?|) red 4 1 d4 txin4 red 5 (msb) 3 d5 txin5 green 0(lsb) 4 d6 txin6 40 y2p txout0?{ 6 (in0?{) green 1 6 d7 txin7 green 2 7 d8 txin8 green 3 9 d9 txin9 green 4 10 d10 txin10 39 y2m txout1?| 7 (in1?|) green 5(msb) 12 d11 txin11 blue 0 (lsb) 13 d12 txin12 blue 1 15 d13 txin13 38 y1p txout1?{ 8 (in1?{) blue 2 16 d14 txin14 blue 3 18 d15 txin15 blue 4 19 d16 txin16 35 y3m txout2?| 9 (in2?|) blue 5 (msb) 20 d17 txin17 hrsvd 22 d18 txin18 vrsvd 23 d19 txin19 enab 25 d20 txin20 34 y3p txout2?{ 10 (in2?{) 33 clkoutm txclk out?| 11 (clkin?|) ck 26 clkin txclk in 32 clkoutp txclk out?{ 12 (clkin?{) www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 16 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative 10-2 digitizer unit interface (cn-3) table 10-3 shows the digitizer unit interface data assignment. table 10-3 digitizer unit interface data assignment pin name in/out function 1 gnd ground 2 pws1 out auxiliary port1 3 pws2 out auxiliary port2 4 pws3 out auxiliary port3 5 pws4 out auxiliary port4 6 pdct out pen detect signal 7 dsr in data set ready signal 8 cts in clear to send signal 9 txd out serial data output signal 10 rxd in serial data input signal 11 slp in sleep signal 12 res in reset 13 vcc power supply (3.3 volt) 14 gnd ground ~ ? connector on su-001: df19l-14p-1h / hirose electric co., ltd ~ ? mating connector (corresponding connector) : df19l-14s-1c / hirose electric co., ltd txd serial data output signal to be connected to host?s rxd rxd serial data input signal to be connected to host?s txd cts clear to send signal to be connected to host?s rts for plug & play dsr data set ready signal to be connected to host?s dtr for plug & play pcdt pen detect output signal this is set ?high? while pen device detects pen or eraser. leave this open if host does not use. slp sleep input signal when set ?high?, pen device stops and goes into sleep mode keep this ?low? if sleep mode is not needed. res reset pen device stops operating when res is set ?low?. input ?system power on reset? signal. pws1:4 auxiliary port leave this pen. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 17 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative 10-3 color data assignment table 10-4 shows the color data assignment. table 10-4 color data assignment input data?i?o?f?k???? level?c?p?f?g?????? level?j color/ brightness r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic color black blue green cyan red magenta yellow white ?o ?o ?o ?o ?p ?p ?p ?p ?o ?o ?o ?o ?p ?p ?p ?p ?o ?o ?o ?o ?p ?p ?p ?p ?o ?o ?o ?o ?p ?p ?p ?p ?o ?o ?o ?o ?p ?p ?p ?p ?o ?o ?o ?o ?p ?p ?p ?p ?o ?o ?p ?p ?o ?o ?p ?p ?o ?o ?p ?p ?o ?o ?p ?p ?o ?o ?p ?p ?o ?o ?p ?p ?o ?o ?p ?p ?o ?o ?p ?p ?o ?o ?p ?p ?o ?o ?p ?p ?o ?o ?p ?p ?o ?o ?p ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p ?o ?p red black darker ? brighter ? red 0 1 2 ?f ?f ?f 61 62 63 ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?p ?f ?f ?f ?o ?p ?p ?o ?p ?o ?f ?f ?f ?p ?o ?p ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o green black darker ? brighter ? green 0 1 2 ?f ?f ?f 61 62 63 ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?p ?f ?f ?f ?o ?p ?p ?o ?p ?o ?f ?f ?f ?p ?o ?p ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o blue black darker ? brighter ? blue 0 1 2 ?f ?f ?f 61 62 63 ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?o ?o ?o ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?o ?f ?f ?f ?p ?p ?p ?o ?o ?p ?f ?f ?f ?o ?p ?p ?o ?p ?o ?f ?f ?f ?p ?o ?p note.1) definition of gray scale:color (n) ?c ?n? indicates gray scale level. larger number means brighter level. note.2) data; 1:high, 0:low note 3) color data consist of 6 bit red, green and blue data of odd and even number pixel data. total data number is 36 signals. this modu le is able to display 262,144 colors because each red, green and blue data is controlled independently. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 18 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative 10-4 input signal timing table 10-5 and figure 10-3 shows the input signal timing at lvds transmitter. table 10-5 timing characteristics (ta=0~50 ? c, vcc=3.30.3v) item symbol min. typ. max. unit remark period tc 15.15 15.38 28.5 ns frequency fc 35 65 66 mhz ?? ?b =1/?s ?b duty tch/tc 45 50 55 ?? *1 high time tclkh 6 ?? ?? ns low time tclkl 6 ?? ?? ns rise time tclkr ?? ?? 5.0 ns dclk signal (clock) fall time tclkf ?? ?? 5.0 ns setup time tset 3.0 ?? ?? ns (65mhz) dclk-data timing hold time thold 7.0 ?? ?? ns (65mhz) horizontal period th 1320 1344 1566 dclk signal frequency fh 38.6 48 60 khz display period thd 1024 1024 1024 dclk *2 vertical period tv 772 806 868 th 16.67ms signal frequency fv 59.998 59.998 59.998 hz display period tvd ?? 768 ?? th *2 enab signal data-enab timing tdn ?? 0 ?? dclk *3 *1)?clock must be input while the power is on. *2)?horizontal display position is spec ified by the rise of enab signal only. the data latched at falling edge of dclk after rise of enab is displayed at the left edge of the display area. ?vertical display position is specified by the rise of ?l ? enab after ?h? level continuation over 2 horizon period. the data latched at the rise of enab is di splayed at the top line of the display area. *3) ?if high time enab does not synchronize with the effectiv e data period, the display position does not fit to the display area. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/ ? 19 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC26XGC6R 1 2 3 4 a b c c title draw. no. ? tech bes lcd-00185 fujitsu display technologies corporation tentative figure 10-3 input signal timing chart tdn=0clk tdn=0clk 0001 0003 ? ? ? ? y ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? a b ck 0.5v cc ck enab r0-r5 g0-g5 b0-b5 tc tset thold tck tck valid data center of input signal?f 0.5v cc v il (max) : 0.3v cc (v) v ih (min) : 0.7v cc (v) v il (max) : 0.3v cc (v) v ih (min) : 0.7v cc (v) duty(a, b) : 50?}5% th thd r0-r5 g0-g5 b0-b5 enab |