View P0430WQLB-T_2485465.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 docum e nt no.: t e ntative pr oduct specification module name: P0430WQLB-T issue date: 2009/06/02 v ersion: 1.7 note: 1. the information contained h e rein may be ch ange without pr ior notice. i t is th er efor e adv i sable to co ntact chi mei el corp. befo re d e s i gned y our prod uct b a sed on this specif i cation . 2. this tentative pr oduct specificati on is for ref e ren ce, some item or setting may b e changed for ev alu a tion . customer appr oved by customer appr oved by cmel pd division eng division qa dept for more informa tion: az displa ys, inc. 75 columbia, aliso viejo, ca 92656 http://www .azdispla ys.com
2 document no.: reversion history version date page description ver.1.0 ver.1.1 ver.1.2 ver.1.3 ver.1.4 ver.1.5 ver.1.6 ver.1.7 2007/12/26 2008/03/19 2008/04/08 2008/07/21 2008/09/24 2008/10/02 2008/11/21 2009/06/02 all 10,11,12 15,16,17 18 10 14 19 20 9,10,11 3 18 19 9 9,10,11 19 21 tentative specification was first issued add ic initial register setting modify pin assignment change external dimension change typical luminance add system diagram add reliability test add package drawing modify electro-optical characteristic add weight of mechanical data add test and measurement conditions modify package drawing modify life time modify electro-optical characteristic change cie and gamma add handling, storage, panel id label naming rule and warranty
3 document no.: 1. purpose: this documentation defines general product specification for oled module supplied by cmel. the information described in this techni cal specification is te ntative. please contact cmel?s representative while your product is modified. 2. general description: driving mode: active matrix color mode: full color (16m color) driver ic: hx5116, cog assembly interface: 8bit serial rgb a nd 24bit parallel rgb interface application: portable dvd, pmp, gps, photo frame etc. rohs compatible 3. mechanical data: no. items specification unit 1 diagonal size 4.3 inch 2 resolution 480 x rgb x 272 3 pixel pitch 198 x 198 um 4 active area 95.0 x 53.8 mm 5 outline area 103.5 x 67 mm 6 thickness 3.15 mm 7 weight 54 g 4. absolute maximum ratings: absolute ratings of environment va l u e item symbol min. max. unit note storage temperature t st -40 +85 oc (1) operating ambient temperature t op -20 +60 oc (2) note (1) the storage duration for both critical temperature (-40 & 85 ) meet reliability test criteria. (2) the operating duration for both critical temperature (-20 & 60 ) meet reliability test criteria.
4 document no.: 5. electrical characteristic: dc characteristic dc characteristics (unless otherwise specified, voltage referenced to vss = 0v, vcc = 1.5 to 3.6v, t a = -20 to 70c) parameter symbol test condition min. typ. max. unit system power supply pins of the logic block vcc - 1.5 - 3.6 v booster reference supply voltage range vci - 3.0 - 3.6 v ddvdh output voltage 1 ddvdh set cp1x=0 4.9 5.1 5.3 v ddvdh output voltage 2 ddvdh set cp1x=1 5.8 6.0 6.2 v vgam1out output voltage 1 vgam1out set cp1x=0 4.7 4.8 4.9 v vgam1out output voltage 2 vgam1out set cp1x=1 5.7 5.8 5.9 v gate driver high output voltage vgh - +3 - +8 v gate driver low output voltage vgl - -8 - -3 v oled diode refer voltag e arref - -8 - +8 v logic high output voltage voh iout=-400a 0.8 * vcc - vcc v logic low output voltage vol iout=400a 0 - 0.2 * vcc v logic high input voltage vih 0.8 * vcc - vcc v logic low input voltage vil - 0 - 0.2 * vcc v logic input current iil/iih no pull up or pull low -1 - 1 a pull high resistance rh pull up pins 600 900 1200 k ? pull low resistance rl pull low pins 600 900 1200 k ? high output current ioh s1~s107, vo=4.9v vs. 4v 50 - - a low output current iol s1~s107, vo=0.1v vs. 1v - - -50 a output leakage current ioz - -1 - 1 a output voltage offset vos s1~s107, vo=0.1v~ddvdh-0.1v 10 mv output voltage deviation vod s1~s107, vo=0.1v~ddvdh-0.1v 10 mv analog standby current istb vci=3.0v, stand by mode - 10 ua analog operating current ivci vci=3.0v, s1~s160 no load - 20 ma logic pins input capacitance cin - - 5 7.5 pf
5 document no.: ac characteristic ac electrical characteristics
6 document no.: clock and data input waveforms define the hsync to vsync timing for rgb mode
7 document no.: 5.2.2 480rgb x 272 serial rgb interface 5.2.2 480rgb x 272 parallel rgb interface
8 document no.: serial rgb horizontal data format parallel rgb horizontal data format digital rgb vertical data format
9 document no.: 6. electro-optical characteristic: items symbol min typ. max unit remark operating luminance l 136 160 184 cd/m 2 (1)(5) power consumption pon 700 950 mw 30% pixels on (1) maximum current icc 220 302 ma (1) response time tres 50 us (2) ciex (white) wx 0.23 0.28 0.33 - (5) ciey (white) wy 0.25 0.30 0.35 - (5) ciex (red) rx 0.615 0.655 0.695 - (5) ciey( red) ry 0.300 0.340 0.380 - (5) ciex (green) gx 0.195 0.235 0.275 - (5) ciey( green) gy 0.610 0.650 0.690 - (5) ciex (blue) bx 0.100 0.140 0.180 - (5) ciey( blue) by 0.105 0.145 0.185 - (5) viewing angle va 160 170 degree (3) contrast cr 5000:1 10000:1 (4) operation lifetime ltop 30000 hrs (1)(6) note: measuring surrounding: dark room surrounding temperature: 25 o c 1. test condition: a. ar_vdd= 5.2v +/-0.03v, ar_vss= -4.8v +/-0.03v b. ic initial register setting: 24-bit parallel rgb (de) ver. 5 index_out(0x04); parameter_out(0x23); //s et display mode 24-bit parallel rgb (de) index_out(0x05); parameter _out(0x82); //set display mode index_out(0x07); parameter_out(0 x0f); //set driver capability index_out(0x34); parameter_out (0x18); //set display timing index_out(0x35); parameter_out (0x28); //set display timing index_out(0x36); parameter_out (0x16); //set display timing index_out(0x37); parameter_out (0x01); //set display timing index_out(0x02); parame ter_out(0x02); //otp on
10 document no.: index_out(0x0a); paramete r_out(0x8a); //vghvgl=+/-6v index_out(0x09); parameter _out(0x26); //vgam1out=4.95v index_out(0x10); paramete r_out(0x7a); //set r slop index_out(0x11); paramete r_out(0x78); //set g slop index_out(0x12); paramete r_out(0x75); //set b slop index_out(0x13); parame ter_out(0x00); //set r_0 index_out(0x14); parame ter_out(0x02); //set r_10 index_out(0x15); parame ter_out(0x00); //set r_36 index_out(0x16); parame ter_out(0x01); //set r_80 index_out(0x17); parame ter_out(0x01); //set r_124 index_out(0x18); parame ter_out(0x01); //set r_168 index_out(0x19); parame ter_out(0x01); //set r_212 index_out(0x1a); parame ter_out(0x04); //set r_255 index_out(0x1b); parame ter_out(0x00); //set g_0 index_out(0x1c); parame ter_out(0x07); //set g_10 index_out(0x1d); parame ter_out(0x03); //set g_36 index_out(0x1e); parame ter_out(0x03); //set g_80 index_out(0x1f); parame ter_out(0x05); //set g_124 index_out(0x20); parame ter_out(0x05); //set g_168 index_out(0x21); parame ter_out(0x03); //set g_212 index_out(0x22); parame ter_out(0x0a); //set g_255 index_out(0x23); parame ter_out(0x00); //set b_0 index_out(0x24); parame ter_out(0x03); //set b_10 index_out(0x25); parame ter_out(0x01); //set b_36 index_out(0x26); parame ter_out(0x00); //set b_80 index_out(0x27); parame ter_out(0x00); //set b_124 index_out(0x28); parame ter_out(0x00); //set b_168 index_out(0x29); parame ter_out(0x00); //set b_212 index_out(0x2a); parame ter_out(0x01); //set b_255 index_out(0x06); parameter _out(0x03); //set display on ar_vdd= +5.2v ar_vss= -4.8v 8-bit serial rgb (de) ver. 5 index_out(0x04); parameter_out(0x21); //s et display mode 8-bit serial rgb (de) index_out(0x05); parameter _out(0x82); //set display mode index_out(0x07); parameter_out(0 x0f); //set driver capability index_out(0x34); parameter_out (0x48); //set display timing
11 document no.: index_out(0x35); parameter_out (0x78); //set display timing index_out(0x36); parameter_out (0x42); //set display timing index_out(0x37); parameter_out (0x01); //set display timing index_out(0x02); parame ter_out(0x02); //otp on index_out(0x0a); paramete r_out(0x8a); //vghvgl=+/-6v index_out(0x09); parameter _out(0x26); //vgam1out=4.95v index_out(0x10); paramete r_out(0x7a); //set r slop index_out(0x11); paramete r_out(0x78); //set g slop index_out(0x12); paramete r_out(0x75); //set b slop index_out(0x13); parame ter_out(0x00); //set r_0 index_out(0x14); parame ter_out(0x02); //set r_10 index_out(0x15); parame ter_out(0x00); //set r_36 index_out(0x16); parame ter_out(0x01); //set r_80 index_out(0x17); parame ter_out(0x01); //set r_124 index_out(0x18); parame ter_out(0x01); //set r_168 index_out(0x19); parame ter_out(0x01); //set r_212 index_out(0x1a); parame ter_out(0x04); //set r_255 index_out(0x1b); parame ter_out(0x00); //set g_0 index_out(0x1c); parame ter_out(0x07); //set g_10 index_out(0x1d); parame ter_out(0x03); //set g_36 index_out(0x1e); parame ter_out(0x03); //set g_80 index_out(0x1f); parame ter_out(0x05); //set g_124 index_out(0x20); parame ter_out(0x05); //set g_168 index_out(0x21); parame ter_out(0x03); //set g_212 index_out(0x22); parame ter_out(0x0a); //set g_255 index_out(0x23); parame ter_out(0x00); //set b_0 index_out(0x24); parame ter_out(0x03); //set b_10 index_out(0x25); parame ter_out(0x01); //set b_36 index_out(0x26); parame ter_out(0x00); //set b_80 index_out(0x27); parame ter_out(0x00); //set b_124 index_out(0x28); parame ter_out(0x00); //set b_168 index_out(0x29); parame ter_out(0x00); //set b_212 index_out(0x2a); parame ter_out(0x01); //set b_255 index_out(0x06); parameter _out(0x03); //set display on ar_vdd= +5.2v ar_vss= -4.8v
12 document no.: 2. response time test condition 100% 90% 10% t r tf time 3. viewing angle test condition: 4. contrast luminance with all pixels white cr = luminance with all pixels black 5. optical tester: ca210 6. brightness of 30% power consumption. op erating life time is defined when the luminance has decayed to less than 50% of the initial measured luminance before life test.
13 document no.: 7. system diagram: hx5116 hosts sda scl n cs n reset dclk vsync hsync de db (24bit) db(24bit) serial interface rgb interface
14 document no.: 8. pin assignment: pin symbol i/o description remarks 1 tp1 i touch panel p1 2 tp2 i touch panel p2 3 tp3 i touch panel p3. 4 tp4 i touch panel p4 5 ar_vss i negative voltage for oled 6 ar_vss i negative voltage for oled 7 test1_vs open cmel test pin, it must be open. 8 ar_vdd i positive voltage for oled 9 ar_vdd i positive voltage for oled 10 test2_vd open cmel test pin, it must be open. 11 arref i/o panel refers voltage of the regulato r arref or external input voltage. (-8v~+8v) 12 vgl i/o low voltage output of regulator vgl or external input voltage. (-3v~-8v) 13 vgh i/o high voltage output of regulator vgh or external input voltage. (+3v~+8v) 14 lvo i/o negative output voltage of the booster2. (-8.5v) 15 c22n 16 c22p i/o connect to the step-up circuit, capac itors according to the step-up factor. leave this pin open if the internal step-up circuit is not used. 17 hvo i/o positive output voltage of the booster2. (8.5v) 18 c21p 19 c21n i/o connect to the step-up circuit, capac itors according to the step-up factor. leave this pin open if the internal step-up circuit is not used. 20 c11n 21 c11p 22 c12n 23 c12p i/o connect to the step-up circuit, 4cap acitors according to the step-up factor. leave this pin open if the internal step-up circuit is not used. 24 pvss p charge pump ground pin, it must connect to external ground. 25 ddvdh i/o output voltage of t he booster1. (5.1v/6.0v) 26 vssa p analog ground pin. it must connect to external ground. 27 vssa p analog ground pin. it must connect to external ground. 28 vci p a power supply for the analog circuit. (3.0v~3.6v) 29 vci p a power supply for the analog circuit. (3.0v~3.6v) 30 vgam1out i/o output voltage of t he vgam1out regulator and used positive power of source driver. (4.8v/5.8v) 31 vddd i/o internal logic voltage input or output pin vdc_enb=0, vddd is output, please connect to 1uf capacitor. vdc0 vddd status 0 1.8v normal display
15 document no.: 1 2.5v otp program vdc_enb=1, vddd is input. (i nput range = 1.6v~2.75v) 32 vcc p a power supply for the digital circuit. (1.5v~3.6v) 33 vssd p digital ground pin. it must connect to external ground. 34 nreset i reset pin. setting either pin low initializes the lsi. must be reset after power is supplied. (normally pull high) 35 ncs i serial interface chip enable pin. (normally pull high) 36 scl i serial interface clock input pin. (normally pull high) 37 sda i serial interface data line. (normally pull high) 38 de i data enable: when vsync+hsync+de mode, de=h: data enable, de=l : data disable (black). (normally pull low) 39 vsync i frame synchronizing signal. if vspl=0: active low. if vspl=1: active high. 40 hsync i line synchronizing signal. if hspl=0: active low. if hspl=1: active high. 41 dclk i dot clock signal. if dpl=0: data are input on the rising edge of dotclk. if dpl=1: data are input on the falling edge of dotclk. 42 d27 43 d26 44 d25 45 d24 46 d23 47 d22 48 d21 49 d20 50 d17 51 d16 52 d15 53 d14 54 d13 55 d12 56 d11 57 d10 58 d07 59 d06 i digital data input. dx0 is lsb and dx7 is msb. (normally pull low) 1. if parallel rgb input mode is used , d0x, d1x, and d2x indicate r, g, and b data in turn. 2. if serial rgb or rgbd or ccir601 or ccir656 input mode is selected, only d07~d00 are us ed, and others short to gnd. dx7~dx0 has 8-bit width, respectively to compose 16,777,216 color and 256 gray scale of 1 pixel.
16 document no.: 60 d05 61 d04 62 d03 63 d02 64 d01 65 d00 66 test3_w open cmel test pin, it must be open. 67 ar_vdd i positive voltage for oled 68 ar_vdd i positive voltage for oled 69 ar_vss i negative voltage for oled 70 ar_vss i n egative voltage for oled 71 test4_p open cmel test pin, it must be open.
17 document no.: 9. external dimension:
18 document no.: 10. reliability test: no item specification 1 high temp. storage 85 , 240hr 2 low temp. storage -40 , 240hr 3 high temp. operation 60 , 240hr 4 low temp. operation -20 , 240hr 5 high temp./ high hum. storage 85 , 85 % rh, 120 hr 6 high temp./ high hum. operation 60 , 90 % rh, 240hr 7 thermal shock storage -40 , 30 min. --> 85 , 30 min., 100 cycles (1) contact discharge mode: +/- 2kv, 3 times/fpc pin 8 esd (2) air discharge mode: +/- 8 kv, 10 times/central area drop 1 corner, 3 sides, 6 faces, 1 time for each; height: follow ista standard. 9 packing test follow ista standard, 1.14grms test axis: x, y, z test and measurement conditions all measurements shall not be started until th e specimens attain to temperature stability. the degradation of polarizer is ignored for item 1, 5 & 6. the test pattern at operating conditio n is 30%p.c. alternating pictures. evaluation criteria no damage to glass or encapsulation no drastic change to display defects / mura follow product specification luminance: within +/-50% of initial value current consumption: within +/-50% of initial value
19 document no.: 11. handling: do not scratch the surface of the pol arizer film as it is easily damaged. when cleaning the display surface, use soft cl oth with solvent (as recommended below) and wipe lightly ethyl alcohol isopropyl alcohol do not wipe the display surface with dry or hard materials that damage the polarizer surface. since this oled panel is made of glass, dropping the module or banging it against hard objects may cause cracks or fragmentation. do not disassemble the oled module as it may cause permanent damage. hold oled very carefully when placing o led module into the system housing. do not excessive stress or pressure to oled module. 12. storage: storing in a polyethylene bag with the opening sealed. placing in a dark place where ne ither exposure to direct sunlig ht nor any fluorescent light is permitted and keep at room temperature & room humidity. storing with no contact with polarizer surface. it is recommended to store them in th e inner container which we delivered. 13. panel id label naming rule single format example:
20 document no.: 14. package:
21 document no.: 15. warranty warranty term is 12 months of reliability char acteristics of quality level after the outgoing date in chi mei el corporation. chi mei el corporation could compensate fo r defectives, which happen within warranty term under condition that products should be stored or be used as specified under normal condition within the contents of specification. otherwise, it is unable to compensate for defectives when below items happen: (1) defectives happen by customer?s mistake such as careless hand ling or design change, etc. (2) defectives caused by natural uncontrolled disaster. (3) the direct and/or indirect damage cau sed by unapproved or di sagreed use behavior, condition, environment, which is over or not belong to the produc t specification or other related technique document published by cmel. after 12 months of warranty term, all re placement for defectives will be charged.

▲Up To Search▲

Price & Availability of P0430WQLB-T

	To Download P0430WQLB-T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .