![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
package schematic photo scr optocouplers 8/6/02 page 1 of 10 ?2002 fairchild semiconductor corporation H11C1 h11c2 h11c3 h11c4 h11c5 h11c6 description the h11c series consists of a gallium-arsenide infrared emitting diode optically coupled with a light activated silicon control led recti?r in a dual-in-line package features high ef?iency, low degradation, liquid epitaxial led underwriters laboratory (ul) recognized ?file #e90700 vde recognized (file #94766) ?ordering option .300. (e.g., H11C1.300) 200v/400v peak blocking voltage high isolation voltage - 5300v ac (rms) applications low power logic circuits telecommunications equipment portable electronics solid state relays interfacing coupling systems of different potentials and impedances. 10 a, t 2 l compatible, solid state relay 25 w logic indicator lamp driver 200 v symmetrical transistor coupler (H11C1, h11c2, h11c3) 400 v symmetrical transistor coupler (h11c4, h11c5, h11c6) 6 1 6 1 6 1 cathode anode 1 2 3 anode cathode 4 5 6 gate n/c
8/6/02 page 2 of 10 ? 2002 fairchild semiconductor corporation photo scr optocouplers H11C1 h11c2 h11c3 h11c4 h11c5 h11c6 parameter symbol device value units total device storage temperature t stg all -55 to +150 c operating temperature t opr all -55 to +100 c lead solder temperature t sol all 260 for 10 sec c emitter continuous forward current i f all 60 ma reverse voltage v r all 6 v forward current - peak (1 s pulse, 300 pps) i f(pk) all 3.0 a led power dissipation p d all 100 mw derate above 25 c 1.33 mw/ c detector power dissipation (ambient) p d all 400 mw derate linearly above 25 c ambient 5.3 mw/ c power dissipation (case) p d all 1w derate linearly above 25 c case 13.3 mw/ c peak reverse gate voltage v gr all 6 v rms on-state current i dm (rms) all 300 ma peak on-state current (100 s, 1% duty cycle) i dm (peak) all 10 a surge current (10ms) i dm (surge) all 5 a peak forward voltage v dm H11C1, h11c2, h11c3 200 v peak forward voltage v dm h11c4, h11c5, h11c6 400 v 8/6/02 page 3 of 10 ? 2002 fairchild semiconductor corporation photo scr optocouplers H11C1 h11c2 h11c3 h11c4 h11c5 h11c6 *typical values at t a = 25 c electrical characteristics (t a = 25 c unless otherwise speci ed.) individual component characteristics parameter test conditions symbol device min typ* max unit emitter input forward voltage i f = 10 ma v f all 1.2 1.5 v reverse leakage current v r = 3 v i r all 10 a capacitance v f = 0 v, f = 1.0 mhz c j all 50 pf detector off-state voltage r gk = 10k ? , t a = 100 c, i d = 50a v dm H11C1, h11c2, h11c3 200 v r gk = 10k ? , t a = 100 c, i d = 150a h11c4, h11c5, h11c6 400 reverse voltage r gk = 10k ? ,t a = 100 c, i r = 50a v rm H11C1, h11c2, h11c3 200 v r gk = 10k ? ,t a = 100 c, i r = 150a h11c4, h11c5, h11c6 400 on-state voltage i tm = 300 ma v tm all 1.2 1.3 v off-state current v dm = 200v, t a = 100 c, i f = 0 ma, r gk = 10k ? i dm H11C1, h11c2, h11c3 50 a v dm = 400v, t a = 100 c, i f = 0 ma, r gk = 10k ? h11c4, h11c5, h11c6 150 reverse current v rm = 200 v, t a = 100 c, i f = 0 ma, r gk = 10k ? i rm H11C1, h11c2, h11c3 50 a v rm = 400 v, t a = 100 c, i f = 0 ma, r gk = 10k ? h11c4, h11c5, h11c6 150 transfer characteristics (t a = 25 c unless otherwise speci ed.) characteristics test conditions symbol device min typ* max units input current to trigger v ak = 50 v, r gk = 10 k ? i ft H11C1,h11c2, h11c4, h11c5 20 h11c3, h11c6 30 ma v ak = 100 v, r gk = 27 k ? H11C1,h11c2, h11c4, h11c5 11 h11c3, h11c6 14 coupled dv/dt, input to output ( gure 8) dv/dt all 500 v/s 8/6/02 page 4 of 10 ? 2002 fairchild semiconductor corporation photo scr optocouplers H11C1 h11c2 h11c3 h11c4 h11c5 h11c6 *typical values at t a = 25 c note 1. for this test, led pins 1 and 2 are common, and scr pins 4, 5 and 6 are common. isolation characteristics characteristic test conditions symbol min typ* max units isolation voltage (t = 1 min.) (note 1) v iso 5300 v isolation resistance (note 1) (v i-o = 500 vdc) r iso 10 11 ? isolation capacitance (note 1) (f = 1 mhz, v i-o = 0) c i-o 0.8 pf 8/6/02 page 5 of 10 ? 2002 fairchild semiconductor corporation photo scr optocouplers H11C1 h11c2 h11c3 h11c4 h11c5 h11c6 figure 1. led forward current vs. forward voltage figure 3. input trigger current vs. temperature figure 4. off-state current vs. temperature figure 2. trigger current vs anode-cathode voltage forward voltage - vf (v) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 forward current - if (ma) 0.1 1 10 100 ta = 100 ? c ta = 2 5 ? c ta = -40 ? c v ak , anode-cathode voltage (v) 110 100 i ft , normal i z ed trigger current 0.1 1 10 100 r gk = 300 ohm r gk = 1k r gk = 10k normalized to v ak = 50v r gk = 10k t a = 25 o c r gk = 27k r gk = 56k t a , ambient temperature ( o c) -60 -40 -20 0 20 40 60 80 100 i ft , input trigger current, normalized 0.1 1 10 r gk = 300 ohm r gk = 1k r gk = 10k r gk = 27k r gk = 56k normalized to t a = 25 o c r gk = 10k v ak = 50v t a , ambient temperature ( o c) 0 20406080 100 i dm , off- s tat e for ward curre nt, normal ized 0.1 1 10 100 1000 o c normalized to t a = 25 v ak = 50v v ak = 400v v ak = 200v v ak = 50v 8/6/02 page 6 of 10 ? 2002 fairchild semiconductor corporation photo scr optocouplers H11C1 h11c2 h11c3 h11c4 h11c5 h11c6 figure 5. forward blocking voltage, v dm vs. temperature t a , ambient temperature ( o c) 0 20406080 100 v dm , forward blocking voltage (v) 300 350 400 450 500 550 600 650 700 r gk = 10k, 20k r gk = 50k r gk = 100k on-state voltage - vtm (v) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 on-state current - itm (ma) 1 10 100 1000 figure 6. on-state characteristics figure 7. holding current, i h vs. temperature ta = 100 ? c ta = 25 ? c t a , ambient temperature ( o c) -60 -40 -20 0 20 40 60 80 100 i h , holding current ( a) 10 100 1000 10000 r gk = 300 ohm r gk = 1k r gk = 10k r gk = 27k r gk = 56k 8/6/02 page 7 of 10 ? 2002 fairchild semiconductor corporation photo scr optocouplers H11C1 h11c2 h11c3 h11c4 h11c5 h11c6 typical applications 10a, t 2 l compatible, solid state relay use of the h11c4 for high sensitiv- ity, 5300 v isolation capability, provides this highly reliable solid state relay design. this design is compatible with 74, 74s and 74h series t 2 l logic systems inputs and 120v ac (H11C1, h11c2, h11c3) or 220v ac (h11c4, h11c5, h11c6) loads up to 10a. 25w, logic indicator lamp driver the high surge capability and non-reactive input characteris- tics of the h11c allow it to directly couple, without buffers, t 2 l and dtl logic to indicator alarm devices, without danger of introducing noise and logic glitches. 200v/400v symmetrical transistor coupler use of the high voltage pnp portion of the h11c provides a 400v transistor capable of conducting positive and negative signals with current transfer ratios of over 1%. this function is useful in remote instrumentation, high voltage power supplies and test equipment. care should be taken not to exceed the h11c 400mw power dissipation rating when used at high voltages. +5v 470 ? " coil" h11 cx 56k 100 ? 47 ? 47 ? sc14 6d 0. 1 f lo ad " cont act" 120 va c (H11C1, h11c2, h11c3) 220 vac ( h11 c4, h11 c5, h11 c6) in506 0 (4) 120 va c (H11C1, h11c2, h11c3) 220 vac ( h11 c4, h11 c5, h11 c6) logic +5v 56k 470 ? h11cx 0.1 f 100 ? input i ndicator lamp output input h11 cx fig. 8 coupled dv /dt - test circuit tp + h11c4 - vp h exponential oscilloscope 10 k ? ramp gen. 100 ? +100 vac vp = 800 volts tp = .010 seconds f = 25 hertz t a = 25 c dv / dt .63 vp vp 8/6/02 page 8 of 10 ? 2002 fairchild semiconductor corporation photo scr optocouplers H11C1 h11c2 h11c3 h11c4 h11c5 h11c6 package dimensions (through hole) package dimensions (surface mount) package dimensions (0.4 lead spacing) recommended pad layout for surface mount leadform 0.100 (2.54) typ 0.020 (0.51) min 0.350 (8.89) 0.330 (8.38) 0.270 (6.86) 0.240 (6.10) pin 1 id. 0.022 (0.56) 0.016 (0.41) 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.115 (2.92) 0.300 (7.62) typ 0 to 15 0.154 (3.90) 0.100 (2.54) seating plane 0.016 (0.40) 0.008 (0.20) lead coplanarity : 0.004 (0.10) max 0.270 (6.86) 0.240 (6.10) 0.350 (8.89) 0.330 (8.38) 0.300 (7.62) typ 0.405 (10.30) max 0.315 (8.00) min 0.016 (0.40) min 2 5 pin 1 id. 0.016 (0.41) 0.008 (0.20) 0.100 (2.54) typ 0.022 (0.56) 0.016 (0.41) 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.165 (4.18) 4 3 0.020 (0.51) min 1 6 seating plane 0.016 (0.40) 0.008 (0.20) 0.070 (1.78) 0.045 (1.14) 0.350 (8.89) 0.330 (8.38) 0.154 (3.90) 0.100 (2.54) 0.200 (5.08) 0.135 (3.43) 0.004 (0.10) min 0.270 (6.86) 0.240 (6.10) 0.400 (10.16) typ 0 to 15 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) typ 0.070 ( 1.78 ) 0.060 ( 1.52 ) 0.030 ( 0.76 ) 0.100 ( 2.54 ) 0.295 ( 7.49 ) 0.415 ( 10.54 ) note all dimensions are in inches (millimeters) 8/6/02 page 9 of 10 ? 2002 fairchild semiconductor corporation photo scr optocouplers H11C1 h11c2 h11c3 h11c4 h11c5 h11c6 ordering information note all dimensions are in inches (millimeters) option order entry identi?r description s .s surface mount lead bend sd .sd surface mount; tape and reel w .w 0.4" lead spacing 300 .300 vde 0884 300w .300w vde 0884, 0.4" lead spacing 3s .3s vde 0884, surface mount 3sd .3sd vde 0884, surface mount, tape and reel carrier tape specifications 4.0 0.1 1.55 0.05 user direction of feed 4.0 0.1 1.75 0.10 7.5 0.1 16.0 0.3 12.0 0.1 0.30 0.05 13.2 0.2 4.85 0.20 0.1 max 10.30 0.20 9.55 0.20 1.6 0.1 life support policy fairchild s products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. disclaimer fairchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. 8/6/02 page 10 of 10 ? 2002 fairchild semiconductor corporation photo scr optocouplers H11C1 h11c2 h11c3 h11c4 h11c5 h11c6 |
Price & Availability of H11C1
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |