sparkle power inc. a leading power supply web site: manufacturer com www.sparklepower. input characteristics input range: 90 ~ 264vac (rms), full range input frequency: 47 ~ 63hz input current: max 6a (rms) @ 115vac, 3a (rms) @ 230vac inrush current: no damage . u specification ? temperature range: operating: 0c ~ +50c; storage & shipping: -20c ~ +80c ? humidity : 85% on operating, 95% on storage ? dielectric withstand: primary frame ground 1800v ac for 2 second ? efficiency : typical up to 85 % . ? rise time: less than 20ms ? hold-up time: 17ms minimum at nominal input voltage ? power good signal: power on delay time 100 ~ 500ms, off delay 1ms minimum (ttl and cmos compatible) ? leakage current: less than 3.5ma at 264vac, 50hz ? mtbf: 100,000 hours on maximum load at +25c ? dimensions (lxwxh): 140x150x86mm / 5.5x5.9x3.4inch SPI400A8BB (80 plus, rohs compliant) 400 watts atx power supply features ? complied with atx and atx12v standard ? active power factor correctio n (pfc) meet en61000-3-2 ? high efficiency and reliability ? compatible with european union directive 2002/95/ec (restriction on hazardous substances). ? remote on/off function ? internal 12v dc fan included ? noise killer (thermal fan speed control function) ? low noise and ripple ? output over voltage, short circu it, and over cu rrent protection ? 100% hi-pot, ate, and burn-in tested ? re-settable power shut down ? complies with fcc part 15 subpart j class b 115vac operation, and cispr 22 class b at 230vac operation ? approved by cul/ul60950-1 2 nd tuv en60950-1 2 nd , cb 60950-1 2 nd re p ort , fcc , emc sparkle power inc. main office 1000 rock avenue san jose, ca 95131 tel: 408-519-8888 fax: 408-519-9999 e-mail: info@sparklepower.com sparkle power inc. los angeles office 17071 green drive city of industry, ca 91745 tel: 626-839-7180 fax: 626-839-3395 output characteristics output voltage minimum load normal load maximum load load reg. ripple & noise +3.3v 0.1a 10.5a 21a 5% 50mv p-p +5v 0.2a 7.5a 20a 5% 50mv p-p +12v1 0.1a 5.5a 16a 5% 120mv p-p +12v2 0.5a 4.0a 16a 5% 120mv p-p -12v 0.0a 0.25a 0.5a 10% 120mv p-p -5v 0.0a 0.15a 0.3a 10% 50mv p-p +5vsb 0.0a 1.25a 3.0a 5% 50mv p-p * +3.3v and +5v total output not exceed 130w. * total output for this subject power supply is 400w
|