emc choke coil type: PFN1316 please refer to the sales offices on our website for a representative near you www.sumida.com 1/1 product description ? 18.5mm 14.5mm max.(l w), 20.5mm max. height . ? in addition to the typical versions of parameters shown here, custom parameters are available to meet your exact requirements. feature ? iron dust core is used to realize better dc saturation characteristics and higher noise absorption effect. ? less leakage magnetic flux . ? ideally used as normal mode chokes emi suppression in power supplies or signal lines. ? elimination for impulse noise. ? rohs compliance dimensions (mm) specification impedance [min.] part name. inductance ( h) [min.] at 1khz d.c.r.(m ) [max.] (at20 ) rated current (a) 1 PFN1316np-nm29a 21 43 544 t 5mhz 1180 t 10mhz 1245 t 20mhz 5.4 PFN1316np-nm39a 37 58 1245 t 5mhz 2070 t 7mhz 950 ? t 15mhz 2.9 1. rated current: the dc current at which the temperature rise is t 40 .(ta 20 ). solder no solder dip adhesive 16.5 max. 10.0 18.5 max. 10.5 14.5 max. / # : 20.5 max. 0.65 max.
|