|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CTQ Vishay Electro-Films Thin Film Center-Tapped Resistors CHIP RESISTORS FEATURES Product may not be to scale * Center tap feature * Chip size: 0.030 inches square * Resistance range total: 10 to 1M * Resistor material: Tantalum nitride, self-passivating * Moisture resistant * Quartz substrate * Low shunt capacitance < 0.1pF I V The CTQ series resistor chips offer a wide resistance range with lower shunt capacitance than can be offered with the silicon based resistors but only at a lower power level. The CTQ offers the designer flexibility in use as either a single value resistor or as two resistor with a center tap feature. The CTQs six bonding pads allows the user increased layout flexibility. The CTQs are manufactured using Vishay Electro-Films (EFI) sophisticated thin film equipment and manufacturing technology. The CTQs are 100% electrically tested and visually inspected to MIL-STD-883. APPLICATIONS The CTQ center-tapped resistor chips are used mainly in feedback circuits of amplifiers where ratio matching, low shunt capacitance and tracking between two resistors is critical. For low values, the resistance of the six bonding pad configuration can vary, depending on the method of measurement used. Vishay EFI measures low-value resistors by the four-wire Kelvin technique. RA RB V V I TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES Tightest Standard Tolerance Available 0.5% 0.1% PROCESS CODE CLASS H* CLASS K* 132 130 131 102 100 101 *MIL-PRF-38534 25ppm/C 50ppm/C 100ppm/C 10 25 100 360K 620K 1M STANDARD ELECTRICAL SPECIFICATIONS PARAMETER TCR tracking between halves (RA, RB) Center tap ratio, RA/R : Tolerance Noise, MIL-STD-202, Method 308 100 - 250k < 100 or > 251k Moisture resistance, MIL-STD-202, Method 106 Stability, 1000 hours, + 125C, 30mW Operating temperature range Thermal shock, MIL-STD-202, Method 107, Test condition F High temperature exposure, + 150C, 100 hours Dielectric voltage breakdown Insulation resistance Operating voltage DC power rating at + 70C (derated to zero at + 175C) 5 x rated power short-time overload, + 25C, 5 seconds *5ppm/C for R < 100. 20ppm/C for R < 20 2ppm/C* 1 1% standard - 35dB typical - 20dB typical 0.5% maximum R/R 0.25% maximum R/R - 55C to + 125C 0.1% maximum R/R 0.2% maximum R/R 400V 1012 minimum 200V 60mW 0.25% maximum R/R VISHAY ELECTRO-FILMS * FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 * GERMANY +49.9287.710 FAX: +49 9287.70435 * ISRAEL +972.3.557.0945 FAX: +972.3.558.9121 * ITALY + 39.2.300.11911 FAX: +39.2.300.11999 * JAPAN +81.42.729.0661 FAX: +81.42.729.3400 * SINGAPORE +65.788.6668 FAX: +65.788.0988 * SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 * UK +44 191 514 8237 FAX: +44 1953 457 722 * USA: (401) 738-9150 FAX: (401) 738-4389 www.vishay.com 82 Document Number: 61030 Revision 07-Aug-01 CTQ Thin Film Center-Tapped Resistors DIMENSIONS in inches 0.030 Vishay Electro-Films CHIP RESISTORS 0.026 0.030 STANDARD CONFIGURATION Six locations. All pads 0.005 x 0.005 inches TYPICAL RANGE 10 - 26.9 TYPICAL RANGE 27 - 99 TYPICAL RANGE 100 - 1M SCHEMATIC RT = R A + R B RA RB MECHANICAL SPECIFICATIONS in inches PARAMETER Chip size Chip thickness Chip substrate material Resistor material Bonding pad size Number of pads Pad material Backing OPTIONS: Alphanumeric part marking, up to six characters Gold bonding pads, 15kA minimum Center-tap ratio tolerances to 0.05% 1 to 10 ohm values available Contact Applications Engineer 0.030 x 0.030 0.002 (0.762 x 0.762 0.05mm) 0.010 0.003 (0.254 0.05mm) Quartz Tantalum Nitride, self-passivating 0.005 x 0.005 (0.127 x 0.127mm) 6 10kA minimum aluminum None, lapped quartz ORDERING INFORMATION Example: 100% visualled, 10k, 1%, 100ppm/C TCR, Aluminum Pads, Class H P/N: W CTQ 101 1000 INSPECTION PRODUCT PROCESS RESISTANCE /PACKAGING FAMILY CODE VALUE W = 100% visually inspected See Process Code Use first 4 parts per MIL-STD-883 table significant digits loaded in matrix tray of resistance (Rt) X = Sample, visually inspected loaded in matrix trays (4% AQL) 1 MULTIPLIER CODE D = 0.0001 C = 0.001 B = 0.01 A = 0.1 0=1 1 = 10 2 = 100 3 = 1000 4 = 10000 F TOLERANCE CODE B =0.1% C =0.2% D = 0.5% F = 1.0% G = 2.0% H = 2.5% J = 5.0% K = 10% M = 20% L = 25% VISHAY ELECTRO-FILMS * FRANCE +33.4.93.37.28.24 FAX: +33.4.93.37.27.31 * GERMANY +49.9287.710 FAX: +49 9287.70435 * ISRAEL +972.3.557.0945 FAX: +972.3.558.9121 * ITALY + 39.2.300.11911 FAX: +39.2.300.11999 * JAPAN +81.42.729.0661 FAX: +81.42.729.3400 * SINGAPORE +65.788.6668 FAX: +65.788.0988 * SWEDEN +46.8.594.70590 FAX: +46.8.594.70581 * UK +44 191 514 8237 FAX: +44 1953 457 722 * USA: (401) 738-9150 FAX: (401) 738-4389 Document Number: 61030 Revision 07-Aug-01 www.vishay.com 83 |
Price & Availability of CTQ |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |