 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Fiber Optic LAN Components Connectorized PIN Plus Preamplifier FEATURES * Prealigned SC Connector sleeve * Data rates > 1GHz * PIN detector and preamplifier in a TO-46 heremtic package * 5V or 3.3V operation * GaAs PIN detector and BiCMOS preamplifier * Differential Output for low noise Preliminary HFD3381-002 The HFD3381-002 is a high-performance 850nm GaAs detector and preamplifier packaged for high-speed data communications. The product is designed for ease of use by the module designer or manufacturer in IEEE 802.3z (1.25Gbps Ethernet), ANSI 10625 (1.062 Gbps Fibre Channel) and ATM XXX, (622Mbps) communications standards. The HFD3381-002 converts optical power into an electrical signal that is used in fiber optic communications and other applications. As the light increases, the output voltage increases, limiting at input powers above -10dBm. The differential output is designed to be AC coupled into a data amplifier. The pre-aligned and lensed package with an industry standard SC style connector sleeve, allows for "drop in" assembly to reduce manufacturing cost. The Honeywell HFD3381-002 is designed to interface with 50/125 and 62.5/125mm multimode fiber. Honeywell Preliminary Fiber Optic LAN Components Connectorized PIN Plus Preamplifier ABSOLUTE MAXIMUM RATINGS Parameter Storage Temperature Case Operating Temperature Lead Solder Temperature Power Supply Voltage Incident Optical Power Rating -40 to +85C 0 to +70C 260C, 10 sec. 6V 0 dBm average, +4 dBm peak Preliminary HFD3381-002 NOTICE Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. ELECTRO-OPTICAL CHARACTERISTICS (Vcc=5V, 0C 35 200 3500 0.3 1200 300 -24 30 35 6 7 8 760 850 Notes: 1. 2. 3. Pin refers to the total optical power at the face of the fiber optic cable input to the HFD3381-002. Responsivity measured with source wavelength of 850nm, 125MHz square wave, Pin=20W peak, Rload=50. The output voltage increases as received light power increases, up to approximately -15dBm. The preamplifier is designed to limit the electrical output signal above this optical input level, and does not introduce signal distortion until the average input power exceeds 0dBm. Bandwidth is measured with a small signal sinusoidal light source with 50 W average power, Rload=50. RMS input referred optical noise is obtained by measuring the RMS output referred noise, then dividing by the responsivity. PSRR is measured from 300KHz to 1GHz by injecting a - 20dB electrical signal on the Vcc pin. The nominal value at 100MHz is recorded. No external bypass components are assumed. An external Vcc filter network will greatly increase the PSRR. Measured at the 50% level of output pulses using 0.5 GHz square wave with <200 ps rise time. Rise and fall times are measured with source wavelength of 850nm, 125MHz square wave, with optical rise and fall times < 200ps, Pin=20W peak, Rload=50. 1. 5. NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product 6. 2 Honeywell * Preliminary For application help: call 1-800-537-6945 Fiber Optic LAN Components Connectorized PIN Plus Preamplifier FIGURE 1: INTERNAL SCHEMATIC DIAGRAM OF THE HFD3381-002 Vcc Preliminary HFD3381-002 Inverted Output Non-Inverted Preamplifier PIN Internal Limiting Amplifier Ground FIGURE 2: RECOMMENDED INTERFACE CIRCUIT FOR THE HFD3381-002 HFD3381 R Vcc C1 Ground Inverted Output 50 ohm transmission line Non-Inverted Output 50 ohm transmission line C2 C2 Limiting Amplifier or Test Equipment Input Input R=10= C1 = 10 nF C2 = Data rate dependant (22nF for rates > 1Gbps For application help: call 1-800-537-6945 Preliminary Honeywell * 3 Fiber Optic LAN Components Connectorized PIN Plus Preamplifier ORDER GUIDE Catalog Listing HFD3381-002 Description Connectorized PIN Plus Preamplifier Preliminary HFD3381-002 SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-367-6786 (USA) 1-800-737-3360 (Canada) +49 (0) 89 35813310 (Germany) +65 3546768 (Singapore) +44 (0) 118 981 9511 (UK) 1-972-470-4271 (International) FAX 1-972-470-4326 (Customer Response Center) 1-972-470-4549 (Fax on demand) +49 (0) 89 3599971 (Germany) +65 35436775 (Singapore) +44 (0) 118 981 7513 (UK) INTERNET http://www.Honeywell.com/sensing opto@micro.honeywell.com MOUNTING DIMENSIONS (for reference only) in./(mm) PINOUT Number 1* 2 3 4 Function VCC Inverted Output Ground Non Inverted Output * Aligned with the Receptacle notch WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Commencing with the date of shipment, Honeywell's warranty runs for 18 months. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally and through our literature, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Preliminary Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 006697-1-EN IL50 GLO 797 Printed in USA 11/29/00 Honeywell Inc. Optoelectronics Facility 830 East Arapaho Road Richardson, Texas 75081 Honeywell Control Systems Ltd. Zodiac House Calleva Park Aldermaston, Berkshire RG7 8HW England Helping You Control Your World |
Price & Availability of HFD3381-002
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |