 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AND412HG Ultra Bright LED Lamps: Type 3 Weight: 0.31g Unit: mm AND412HG 5.90.3 InGaN High Intensity Blue Green Light Emission * RoHS Compliant * 5 mm (T1-3/4) Package * Available on tape and reel * Peak wavelength (lp = 505nm) high bright emission * All plastic mold type, clear colorless lens * Low drive current: 1 to 20 mA DC * Excellent On-Off contrast ratio * Fast response time, capable of pulse operation * High power intensity - suitable for indoor/outdoor applications * High reliability Maximum Ratings (Ta = 25C) Characteristics Forward Current Reverse Voltage Power Dissipation Symbol IF VR PD TOpr TSig 5.00.2 1.00.2 1.5 MAX. 0.65 MAX. 25.4 MIN. 1.0 MIN. 8.60.3 Rating 30 5 120 -40 to 85 -40 to 100 Unit mA V mW C C 0.5 2.54 Operating Temperature Range Storage Temperature Range Electro-Optical Characteristics (Ta = 25C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Symbol VF IR IV lP l ld 2 q 1/2 Test Condition IF = 20 mA VR = 5V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum - - 1250.0 - - 500 - Typical 3.5 - 2200.0 505 40 - 12 Maximum 4.0 10 - - - 510 - Unit V A mcd nm nm nm degree Precaution Please be careful of the following: 1. Soldering temperature: 260 C max. Soldering time: 5 sec. max. Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is recommended to use wrist band or antistatic gloves when handling these LEDs. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 7/18/07 AND412HG InGaN High Intensity Blue Green Light Emission Ultra Bright LED Lamps: Type 3 IF - VF 50 Ta = 25C IV - VF Luminous Intensity IV (mcd) 3.2 3.4 3.6 3.8 4.0 4.2 Forward Current IF (mA) 40 Ta = 25C 10000 30 20 10 1000 500 .01 3.0 1 3 5 10 30 50 100 300 500 Forward Voltage VF (V) Forward Current IF (mA) IV - TC 200 Relative Luminous Intensity - Wavelength IF = 20 mA Ta = 25C Relative Luminous Intensity Relative Luminous Intensity -20 0 20 40 60 80 100 100 50 75 50 20 10 25 0 350 400 450 500 550 600 Wavelength (nm) Case Temperature TC (C) Radiation Pattern 40 10 0 Ta = 25C 20 30 40 50 60 70 80 90 0 0.2 0.4 0.6 0.8 0 0 IF - Ta 20 30 40 50 60 70 80 90 10 Allowable Forward Current IF (mA) 30 20 20 20 40 60 80 Ambient Temperature Ta (C) 100 Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 7/18/07 |
Price & Availability of AND412HG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |