![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PCS1P2860A Multi-Output Clock Synthesizer Features * Generates multiple clock outputs from an inexpensive 25MHz crystal or external reference clock * Frequency outputs: o 25MHz Reference clock o 125MHz o 127MHz * Zero ppm frequency synthesis error for all CLK outputs * 3.3V 5%V Supply Voltage * Low jitter design * Packaged in 16-pin TSSOP * Compatible with CY22393XC-MZ2 * Advanced CMOS process Product Description The PCS1P2860A is a Precision multi-PLL based frequency synthesizer. Six Clock outputs are generated using an inexpensive 25MHz Crystal or external reference clock. The outputs consist of 25MHz Refout, 127MHz and four 125MHz clocks. SHUTDOWNB signal tri-states all the clocks when enabled. The device operates from a Supply Voltage of 3.3V 5%V. The device is available in a 16-pin TSSOP JEDEC package. Application PCS1P2860A is targeted for use in high-end multimedia, communications and consumer applications. Block Diagram AVDD VDD SHUTDOWNB 4 CLKIN / XIN 125MHz Crystal Oscillator PLL XOUT 127MHz 25MHz GND (c)2010 SCILLC. All rights reserved. JANUARY 2010 - Rev. 1 Publication Order Number: PCS1P2860/D PCS1P2860A Pin Diagram 125MHz VDD AGND XIN XOUT REFOUT 125MHz 125MHz 1 2 3 4 5 6 7 8 16 15 14 SHUTDOWNB NC AVDD NC NC GND 125MHz 127MHz PCS1P2860A 13 12 11 10 9 Pin Description Pin # Pin Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 125MHz VDD AGND XIN XOUT REFOUT 125MHz 125MHz 127MHz 125MHz GND NC NC AVDD NC SHUTDOWNB Pin Type Output Power Power Input Output Output Output Output Output Output Power 125MHz Clock Output. Connect to +3.3V. Pin Description Connect to ground. Crystal connection or external reference frequency input. It can be connected to a 25MHz Fundamental mode crystal. Connection to crystal. If using an external reference clock, this pin must be left unconnected. 25MHz Reference Clock output. 125MHz Clock Output. 125MHz Clock Output. 127MHz Clock Output. 125MHz Clock Output. Connect to ground. No connection. No connection. Connect to +3.3V. No connection. Output Enable bit. When this pin is made HIGH, all clocks are enabled. Tri-states all clocks when this pin is LOW. Power Input Rev. 1 | Page 2 of 6 | www.onsemi.com PCS1P2860A Absolute Maximum Ratings Symbol VDD VIN TSTG Ts TJ TDV Parameter Rating -0.5 to +4.6 -0.5 to VDD+0.3 -65 to +150 260 125 2 Unit V C C C KV Power Supply Voltage relative to Ground Input Voltage relative to Ground (Input Pins) Storage temperature Max. Soldering Temperature (10 sec) Junction Temperature Static Discharge Voltage (As per JEDEC STD22- A114-B) Note: These are stress ratings only and are not implied for functional use. Exposure to absolute maximum ratings for prolonged periods of time may affect device reliability. Operating Conditions Parameter VDD / AVDD Operating Voltage TA CL CIN Operating Temperature (Ambient Temperature) Load Capacitance Input Capacitance 5 Description Min 3.135 0 Typ 3.3 Max 3.465 70 15 Unit V C pF pF DC Electrical Characteristics Symbol Parameter VDD / AVDD VIH VIL IIH IIL VOH VOL IOZ ICC IDD ZOUT Operating Voltage Input High Voltage Input Low Voltage Input HIGH current Input LOW current Output High Voltage Output Low Voltage Output Leakage Current Static Current Dynamic Current Nominal output impedance Conditions Min 3.135 2.2 GND-0.3 Typ 3.3 Max 3.465 VDD+0.3 1.0 30 50 Units V V V A A V VIN = VDD VIN = GND VDD = 3.135, IOH = -12mA VDD = 3.135, IOL = 12mA Three-state outputs CLKIN and SHUTDOWNB Pins pulled low No Load, All Clocks on 2.4 0.4 10 5.5 35 30 V A mA mA Rev. 1 | Page 3 of 6 | www.onsemi.com PCS1P2860A AC Electrical Characteristics Symbol CLKIN / XIN Input Frequency Pin 6 CLK OUT 1 tLH Parameter Min Typ 25 25 125 127 Max Unit MHz Output Frequency Pin 1,7,8,10 Pin 9 MHz Rising edge slew rate (Measured from 20% to 80%) Falling edge slew rate (Measured from 80% to 20%) Peak-to-peak Period Jitter @ VDD/2 Synthesis Error (Output Frequency) 1.1 1.3 1.7 2 300 0 V/nS V/nS pS ppm 55 3 % mS tHL 1 1 TPJ 1 tD Output Duty Cycle @ VDD/2 PLL Lock Time from Power-Up 45 50 tLOCK NOTE: 1. CL= 15pF for outputs < 100MHz; CL = 10pF for outputs > 100MHz; Typical Crystal Specifications Fundamental AT cut parallel resonant crystal Nominal frequency Frequency tolerance Operating temperature range Storage temperature Load capacitance(CP) Shunt capacitance ESR 25MHz 50 ppm or better at 25 C -25 to +85 C C -40 to +85 C C 18pF 7pF maximum 25 Note: Note: CL is Load Capacitance and Rx is used to prevent oscillations at overtone frequency of the Fundamental frequency. Typical Crystal Interface Circuit R Crystal Rx CL CL CL = 2*(CP - CS), Where CP = Load capacitance of crystal CS = Stray capacitance due to CIN, PCB, Trace etc. Rev. 1 | Page 4 of 6 | www.onsemi.com PCS1P2860A Package Information 16-lead Thin Shrunk Small Outline Package (4.40-MM Body) 8 1 PIN 1 ID E H 9 16 A Seating Plane L C e D A1 B D A2 Dimensions Symbol Min A A1 A2 B C D E e H L 0.020 0 0.002 0.031 0.007 0.004 0.193 0.169 0.026 BSC 0.252 BSC 0.030 8 0.50 0 Inches Max 0.043 0.006 0.041 0.012 0.008 0.201 0.177 0.05 0.80 0.19 0.09 4.90 4.30 Millimeters Min Max 1.20 0.15 1.05 0.30 0.20 5.10 4.50 0.65 BSC 6.40 BSC 0.75 8 Rev. 1 | Page 5 of 6 | www.onsemi.com PCS1P2860A Ordering Information Part Number PCS1P2860AG-16TR Marking 1P28 60A Package 16-Pin TSSOP, TAPE & REEL, Green Temperature 0 to +70 C C A "microdot" placed at the end of last row of marking or just below the last row toward the center of package indicates Pb-free. Licensed under US patent #5,488,627 and #5,631,920. Note: This product utilizes US Patent #6,646,463 Impedance Emulator Patent issued to PulseCore Semiconductor, dated 11-11-2003. are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes ON Semiconductor and without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. U.S Patent Pending; Timing-Safe and Active Bead are trademarks of PulseCore Semiconductor, a wholly owned subsidiary of ON Semiconductor. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative |
Price & Availability of PCS1P2860A
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |