![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HD74HC299 8-bit Universal Shift/Storage Register (with 3-state outputs) REJ03D0609-0200 (Previous ADE-205-488) Rev.2.00 Jan 31, 2006 Description The HD74HC299 features multiplexed inputs/outputs to achieve full 8-bit data handling in a single 20-pin package. Due to the large output drive capability and 3-state feature, this device is ideally suited for interfacing with bus lines in a bus oriented system. Two function select inputs and two output control inputs are used to choose the mode of operation as listed in the function table. Synchronous parallel loading is accomplished by taking both function select lines S0 and S1 high. This places the 3-state outputs in a high impedance state, which permits data applied to the input/output lines to be clocked into the register. Reading out of the register can be done while the outputs are enabled in any mode. A direct overriding clear input is provided to clear the register whether the outputs are enabled or disabled. Features * * * * * * High Speed Operation High Output Current: Fanout of 15 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 A max Low Quiescent Supply Current: ICC (static) = 4 A max (Ta = 25C) Ordering Information Part Name HD74HC299FPEL HD74HC299RPEL Package Type SOP-20 pin (JEITA) SOP-20 pin (JEDEC) Package Code (Previous Code) PRSP0020DD-B (FP-20DAV) PRSP0020DC-A (FP-20DBV) Package Abbreviation FP RP Taping Abbreviation (Quantity) EL (2,000 pcs/reel) EL (1,000 pcs/reel) Note: Please consult the sales office for the above package availability. Rev.2.00 Jan 31, 2006 page 1 of 8 HD74HC299 Function Table Inputs Mode Clear L L H H H H H H H Function Select S0 S1 X L L X L L X X L H L H H L H L H H Output Control Clock G1 G2 L L X L L X L L X L L L L L L L L L L L X X Serial SL X X X X X X H L X SR X X X X H L X X X A/QA L L QA0 QA0 H L QBn QBn a B/QB L L QB0 QB0 QAn QAn QCn QCn b Inputs/Outputs C/QC L L QC0 QC0 QBn QBn QDn QDn c D/QD L L QD0 QD0 QCn QCn QEn QEn d E/QE L L QE0 QE0 QDn QDn QFn QFn e F/QF L L QF0 QF0 QEn QEn QGn QGn f G/QG L L QG0 QG0 QFn QFn QHn QHn g H/QH L L QH0 QH0 QGn QGn H L h Outputs QA' L L QA0 QA0 H L QBn QBn a QH' L L QH0 QH0 QGn QGn H L h Clear Hold Shift Right Shift Left Load Notes: 1. a to h; the level of steady-state input at inputs A through H, respectively. These data are loaded into the flipflop outputs are isolated from the input/output terminals. 2. QA0 to QH0; the level of QA through QH, respectively, before the indicated steady-state input conditions were established. transition of the clock. 3. QAn to QHn; the level of QA through QH, respectively, before the most-recent 4. ; When one or both output controls are high the eight input/output terminals are disabled to the highimpedance state, however, sequential operation or clearing of the register is not affected. 5. When clear is low, outputs of QA' and QH' are low, in spite of other inputs. Pin Arrangement S0 Output controls G1 G2 G/QC E/QE C/QC A/QA QA Clear 1 2 G S0 S1 SL G/QG E/QE C/QC A/QA QA Clear SR QH H/QH F/QF D/QD B/QB CK 20 VCC 19 S1 18 Shift left SL 3 4 5 6 7 8 9 17 QH 16 H/QH 15 F/QF 14 D/QD 13 B/QB 12 Clock 11 Shift right SR GND 10 (Top view) Rev.2.00 Jan 31, 2006 page 2 of 8 HD74HC299 Logic Diagram Sift right serial-input S1 Sift left serial-input S0 D Q D Q D Q D Q D Q D Q D Q D Q Clear Clock G1 G2 C C CLR C C CLR C C CLR C C CLR C C CLR C C CLR C C CLR C C CLR Q/A A/QA B/QB C/QC D/QD E/QE F/QF G/QG QH H/QH Absolute Maximum Ratings Item Supply voltage range Input / Output voltage Input / Output diode current Output current VCC, GND current Power dissipation Storage temperature Symbol VCC VIN, VOUT IIK, IOK IO ICC or IGND PT Tstg Ratings -0.5 to 7.0 -0.5 to VCC +0.5 20 35 75 500 -65 to +150 Unit V V mA mA mA mW C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Recommended Operating Conditions Item Supply voltage Input / Output voltage Operating temperature Input rise / fall time*1 Symbol VCC VIN, VOUT Ta tr, tf Ratings 2 to 6 0 to VCC -40 to 85 0 to 1000 0 to 500 0 to 400 Unit V V C ns Conditions VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V Notes: 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. Rev.2.00 Jan 31, 2006 page 3 of 8 HD74HC299 Electrical Characteristics Item Input voltage Symbol VCC (V) VIH 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 4.5 6.0 6.0 6.0 6.0 Ta = 25C Min Typ Max 1.5 -- -- 3.15 -- -- 4.2 -- -- -- -- 0.5 -- -- 1.35 -- -- 1.8 1.9 2.0 -- 4.4 4.5 -- 5.9 6.0 -- 4.18 -- -- 5.68 -- -- 4.18 -- -- 5.68 -- -- -- 0.0 0.1 -- 0.0 0.1 -- 0.0 0.1 -- -- 0.26 -- -- 0.26 -- -- 0.26 -- -- 0.26 -- -- 0.5 -- -- -- -- 0.1 4.0 Ta = -40 to+85C Unit Test Conditions Min Max 1.5 -- V 3.15 -- 4.2 -- -- 0.5 V -- 1.35 -- 1.8 1.9 -- V Vin = VIH or VIL IOH = -20 A 4.4 -- 5.9 -- 4.13 -- IOH = -4 mA QA' & QH' Outputs 5.63 -- IOH = -5.2 mA 4.13 -- IOH = -6 mA A/QA thru H/QH Outputs IOH = -7.8 mA 5.63 -- -- 0.1 V Vin = VIH or VIL IOL = 20 A -- 0.1 -- 0.1 -- 0.33 IOH = 4 mA QA' & QH' Outputs -- 0.33 IOH = 5.2 mA -- 0.33 IOH = 6 mA A/QA thru H/QH Outputs IOH = 7.8 mA -- 0.33 -- 5.0 A Vin = VIH or VIL, Vout = VCC or GND -- 1.0 A Vin = VCC or GND -- 40 A Vin = VCC or GND, Iout = 0 A VIL Output voltage VOH VOL Off-state output current Input current Quiescent supply current IOZ Iin ICC Rev.2.00 Jan 31, 2006 page 4 of 8 HD74HC299 Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Item Maximum clock frequency Propagation delay time Symbol VCC (V) fmax 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 -- Min -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 100 20 17 5 5 5 50 10 9 80 16 14 -- -- -- -- -- -- -- Ta = 25C Typ Max -- 5 -- 25 -- 29 -- 190 -- 38 -- 32 -- 220 -- 44 -- 37 -- 190 -- 38 -- 32 -- 220 -- 44 -- 37 -- 160 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 5 32 27 160 32 27 -- -- -- -- -- -- -- -- -- -- -- -- 60 12 10 75 15 13 10 Ta = -40 to +85C Unit Test Conditions Min Max -- 4 MHz -- 20 -- 23 -- 240 ns Clock to QA' or QH' -- 48 -- 41 -- 275 ns Clear to QA' or QH' -- 55 -- 47 -- 240 ns Clock to QA - QH -- 48 -- 41 -- 275 ns Clear to QA - QH -- 55 -- 47 -- 200 ns -- -- -- -- -- 125 25 21 5 5 5 65 13 11 100 20 17 -- -- -- -- -- -- -- 40 34 200 40 34 -- -- -- -- -- -- -- -- -- -- -- -- 75 15 13 95 19 16 10 tPLH tPHL tPHL tPLH tPHL tPHL Output enable time tZH tZL tHZ tLZ tsu Output disable time Setup time ns ns Select Hold time th ns Select Removal time trem ns Clear Pulse width tw ns Output rise/fall time tTLH tTHL ns A/QA thru H/QH outputs ns QA' & QH' outputs Input capacitance Cin pF Rev.2.00 Jan 31, 2006 page 5 of 8 HD74HC299 Test Circuit VCC G1 Input See Function Table VCC Output G G2 S1 S0 SR Clock SL Clear QH' CL = 50 pF QA' Output CL = 50 pF A/QA to H/QH Output 1 k CL = 50 pF TEST t PLH / t PHL t ZH/ t HZ t ZL / t LZ S1 OPEN GND VCC S1 OPEN GND VCC Pulse Generator Zout = 50 Input Pulse Generator Zout = 50 Note : 1. CL includes probe and jig capacitance. Waveforms * Waveform - 1 tf 90 % 50 % 10 % tr 90 % 50 % VCC 0V VCC 50 % Clock th t rem Clear 50 % 0V t su VCC SR or SL 50 % 50 % 0V t su VCC S0 or S1 50 % 50 % 0V tPLH, tPHL QA', QH' QA, QH 90 % 50 % 10 % tPHL, tPLH 90 % 50 % 10 % t PHL VOH 50 % VOL tTLH, tTHL tTHL, tTLH Note : 1. Input pulse : PRR 1 MHz, Zo = 50 , tr 6 ns, tf 6 ns Rev.2.00 Jan 31, 2006 page 6 of 8 HD74HC299 * Waveform - 2 tr 90 % 50 % 10 % 90 % 10 % tf VCC 0V Clock tr S0, S1 10 % tf 90 % 50 % 90 % 50 % 10 % VCC 50 % 50 % 0V VIH t su th A to H 50 % 50 % VIL VOH QA to QH VOL A to H enabled A to H disabled A to H enabled QA to QH disabled A to H disabled QA to QH enabled QA to QH disabled QA to QH enabled Note : 1. Input pulse : PRR 1 MHz, Zo = 50 , tr 6 ns, tf 6 ns * Waveform - 3 90 % 50 % tf tr 90 % 50 % 10 % t ZL 10 % t LZ 50 % t ZH t HZ 90 % VCC 0V VOH G1, G2 Waveform - A 10 % VOL VOH VOL Waveform - B 50 % Notes : 1. Input waveform : PRR 1 MHz, duty cycle 50%, tr 6 ns, tf 6 ns 2. Waveform- A is for an output with internal conditions such that the output is low except when disabled by the output control. 3. Waveform- B is for an output with internal conditions such that the output is high except when disabled by the output control. 4. The output are measured one at a time with one transition per measurement. Rev.2.00 Jan 31, 2006 page 7 of 8 HD74HC299 Package Dimensions JEITA Package Code P-SOP20-5.5x12.6-1.27 RENESAS Code PRSP0020DD-B Previous Code FP-20DAV MASS[Typ.] 0.31g *1 D 11 F NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. 20 bp E HE Index mark Reference Symbol *2 c Dimension in Millimeters Min Nom 12.60 5.50 Max 13.0 Terminal cross section ( Ni/Pd/Au plating ) 1 Z e *3 D E A2 A1 0.00 10 bp x M L1 0.10 0.20 2.20 A bp b1 c c 1 0.34 0.40 0.46 0.15 0.20 0.25 A HE 0 7.50 7.80 1.27 8 8.00 y e x y A1 L 0.12 0.15 0.80 0.50 1 Detail F Z L L 0.70 1.15 0.90 JEITA Package Code P-SOP20-7.5x12.8-1.27 RENESAS Code PRSP0020DC-A Previous Code FP-20DBV MASS[Typ.] 0.52g *1 D F 11 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" @ DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT @ INCLUDE TRIM OFFSET. 20 bp *2 HE E Index mark Reference Symbol c Dimension in Millimeters Min Nom 12.80 7.50 Max 13.2 Terminal cross section ( Ni/Pd/Au plating ) 1 Z e *3 D E A2 10 bp x M L1 A1 A bp b1 c c 1 0.10 0.20 0.30 2.65 0.34 0.40 0.46 0.20 0.25 0.30 A HE 0 10.00 10.40 1.27 8 10.65 A1 y L e x y Z 0.12 0.15 0.935 0.40 1 Detail F L L 0.70 1.45 1.27 Rev.2.00 Jan 31, 2006 page 8 of 8 Sales Strategic Planning Div. Keep safety first in your circuit designs! Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 205, AZIA Center, No.133 Yincheng Rd (n), Pudong District, Shanghai 200120, China Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 http://www.renesas.com Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 (c) 2006. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .5.0 |
Price & Availability of HD74HC299
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |