 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Rectifier diode 1SR139-600 Applications General rectification Dimensions (Unit : mm) Features 1) Cylindrical mold. (MSR) 2) High reliability. Construction Silicon diffused junction Taping specifications (Unit : mm) Absolute maximum ratings (Ta=25C) Parameter Symbol Absolute peak reverse voltage VRMS Reverse voltage (repetitive peak) VR Average rectified forward current Io Forward current surge peak (60Hz / 1cyc) IFSM Junction temperature Tj Storage temperature Tstg Limits 750 600 1 40 150 -40 to +150 Unit V V A A C C Electrical characteristics (Ta=25C) Parameter Symbol VF Forward voltage Reverse current IR Min. - Typ. - Max. 1.1 10 Unit V A Conditions IF=1.0A VR=600V www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.01 - Rev.D 1SR139-600 Electrical characteristics curves Data Sheet 1 Ta=75C 100000 Ta=150C 10000 Ta=75C Ta=125C 100 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) 0.1 Ta=150C Ta=25C Ta=-25C REVERSE CURRENT:IR(nA) FORWARD CURRENT:I F(A) Ta=125C 1000 10 0.01 100 Ta=25C 10 Ta=-25C 1 0 100 200 300 400 500 600 0 5 10 15 20 25 30 0.001 0 200 400 600 800 1000 1200 1 REVERSE VOLTAGE : V R(V) VR-IR CHARACTERISTICS FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS REVERSE VOLTAGE:V R(V) VR-Ct CHARACTERISTICS 950 FORWARD VOLTAGE:V F(mV) REVERSE CURRENT:IR(nA) Ta=25C IF=1A n=30pcs 300 250 200 150 100 50 0 VF DISPERSION MAP IR DISPERSION MAP AVE:30.86nA Ta=25C VR=600V n=30pcs 50 45 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 40 35 30 25 20 15 10 5 0 AVE:18.1pF Ta=25C f=1MHz VR=0V n=10pcs 940 930 920 AVE:926.8mV 910 900 Ct DISPERSION MAP 150 RESERVE RECOVERY TIME:trr(us) 2 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1 IFSM DISRESION MAP trr DISPERSION MAP AVE:1.869us Ta=25 IF=0.5A IR=1A Irr=0.25*IR n=10pcs 100 PEAK SURGE FORWARD CURRENT:I FSM(A) PEAK SURGE FORWARD CURRENT:I FSM(A) Ifsm 100 1cyc 8.3ms Ifsm 8.3ms 8.3ms 1cyc 50 50 AVE:64.0A 0 0 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 100 10000 TRANSIENT THAERMAL IMPEDANCE:Rth (/W) Mounted on epoxy board IF=0.5A 2 PEAK SURGE FORWARD CURRENT:I FSM(A) Ifsm t IM=1mA DC FORWARD POWER DISSIPATION:Pf(W) time(ms) 100 td=300us Rth(j-a) D=1/2 Sin(=180) 1 1000 50 Rth(j-l) 10 Rth(j-c) 0 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 1 0.001 0.01 0.1 1 10 100 1000 0 0 1 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS 2 TIME:t(s) Rth-t CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.01 - Rev.D 1SR139-600 0.02 3 2.5 2 DC 1.5 1 0.5 0 Sin(=180) D=1/2 T 0A 0V t Io VR D=t/T VR=300V Tj=150C AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 2.5 2 1.5 1 Sin(=180) 0.5 0 0 25 50 75 100 125 150 0 25 50 75 3 0A 0V DC D=1/2 Data Sheet Io t T VR D=t/T VR=300V Tj=150C REVERSE POWER DISSIPATION:PR (W) Sin(=180) D=1/2 0.01 DC 0 0 100 200 300 400 500 600 REVERSE VOLTAGE:V R(V) VR-PR CHARACTERISTICS AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 100 125 150 AMBIENT TEMPERATURE:Ta() Derating Curve"(Io-Ta) CASE TEMPARATURE:Tc() Derating Curve"(Io-Tc) 30 ELECTROSTATIC DISCHARGE TEST ESD(KV) 25 20 15 10 5 0 C=200pF R=0 C=100pF R=1.5k AVE:3.70kV AVE:10.6kV ESD DISPERSION MAP www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.01 - Rev.D Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of 1SR139-60010
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |