![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SGC-6389Z Product Description Sirenza Microdevices' SGC-6389Z is a high performance SiGe HBT MMIC amplifier utilizing a Darlington configuration with a patented active-bias network. The active bias network provides stable current over temperature and process Beta variations. Designed to run directly from a 5V supply, the SGC-6389Z does not require a dropping resistor as compared to traditional Darlington amplifiers. The SGC-6389Z product is designed for high linearity 5V gain block applications that require small size and minimal external components. It is internally matched to 50 ohms. 50-4000 MHz Active Bias Silicon Germanium Cascadable Gain Block Pb RoHS Compliant & Green Package Gain & Return Loss 30 S21 20 10 VD = 5V, ID = 84mA Gain (dB) 0 -10 -20 -30 0 Bias Tee Data, ZS = ZL = 50 Ohms, TL = 25C S22 S11 Product Features * Single Fixed 5V Supply * No Dropping Resistor Required * Patented Self Bias Circuitry * Gain = 12.8 dBm at 1950 MHz * P1dB = 18.6 dBm at 1950 MHz * OIP3 = 34.5 dBm at 1950 MHz * Robust 1000V ESD, Class 1C HBM Applications * PA Driver Amplifier * Cellular, PCS, GSM, UMTS, WCDMA * IF Amplifier * Wireless Data, Satellite Frequency 850 MHz 1950 MHz* 2400 MHz 850 MHz 1950 MHz* 2400 MHz 850 MHz 1950 MHz* 2400 MHz 1950 MHz* 1950 MHz* 1950 MHz* Min. 14.8 11.3 Typ. 16.3 12.8 11.9 19.5 18.6 18.2 36.0 34.5 33.5 12.5 11.5 3.7 5.0 74 84 60 94 4.5 Max. 17.8 14.3 0.5 1 1.5 2 2.5 3 3.5 4 Frequency (GHz) Symbol G Parameters Small Signal Gain Units dB P1dB Output Power at 1dB Compression dBm 17.6 OIP3 IRL ORL NF VD ID Rth, j-l Output Third Order Intercept Point Input Return Loss Output Return Loss Noise Figure Device Operating Voltage Device Operating Current Thermal Resistance (junction to lead) VD = 5.0V Bias Tee Data ID = 84mA TL = 25C ZS = ZL = 50 Ohms dBm dB dB dB V mA C/W 32.5 9.0 8.5 Test Conditions: OIP3 Tone Spacing = 1MHz, Pout per tone = 0 dBm * Test results at 1950 MHz measured with Application Circuit The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2007 Sirenza Microdevices, Inc.. All worldwide rights reserved. 303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 1 http://www.sirenza.com EDS-104747 Rev B SGC-6389Z 0.05-4.0 GHz Cascadable MMIC Amplifier Typical RF Performance at Key Operating Frequencies (Bias Tee Data) Symbol G OIP3 P1dB IRL ORL S12 NF Parameter Small Signal Gain Output Third Order Intercept Point Output Power at 1dB Compression Input Return Loss Output Return Loss Reverse Isolation Noise Figure VD = 5V TL = 25C ID = 84mA ZS = ZL = 50 Ohms Unit dB dBm dBm dB dB dB dB 50 18.4 36.0 20.7 17.5 15.5 20.5 2.8 100 18.0 36.5 20.4 23.0 21.0 20.0 2.6 Frequency (MHz) 1950* 500 850 17.6 35.5 19.9 21.5 22.0 21.0 2.9 16.3 36.0 19.5 15.5 15.5 21.5 3.3 12.8 34.5 18.6 12.5 11.5 19.5 3.7 2400 11.9 33.5 18.2 12.0 12.0 19.0 4.0 3500 9.4 30.5 16.5 10.5 10.0 18.5 4.7 Test Conditions: OIP3 Tone Spacing = 1MHz, Pout per tone = 0 dBm * Test results at 1950 MHz measured with Application Circuit Typical Performance with Bias Tees, VD = 5V, ID = 84mA OIP3 vs. Frequency (0dBm/tone, 1MHz spacing) 38 36 34 32 25C 23 21 P1dB vs. Frequency P1dB (dBm) OIP3 (dBm) 19 17 15 13 25C -40C 85C 30 28 0 0.5 -40C 85C 1 1.5 2 2.5 3 3.5 0 0.5 1 1.5 2 2.5 3 3.5 Frequency (GHz) Frequency (GHz) Absolute Maximum Ratings Parameter Max Device Current (ICE) Max Device Voltage (VCE) Max. RF Input Power* (See Note) Max. Junction Temp. (TJ) Operating Temp. Range (TL) Max. Storage Temp. *Note: Load condition, ZL = 50 Ohms Absolute Limit 120 mA 6.5 V +18 dBm +150C -40C to +85C +150C Reliability & Qualification Information Parameter ESD Rating - Human Body Model (HBM) Moisture Sensitivity Level Rating Class 1C MSL 1 This product qualification report can be downloaded at www.sirenza.com Caution: ESD sensitive Appropriate precautions in handling, packaging and testing devices must be observed. Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: IDVD < (TJ - TL) / RTH, j-l TL=TLEAD 303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 2 http://www.sirenza.com EDS-104747 Rev B SGC-6389Z 0.05-4.0 GHz Cascadable MMIC Amplifier Typical Performance with Bias Tees, VD = 5V, ID = 84mA Noise Figure vs. Frequency 6 5.5 5 4.5 Current vs. Voltage 100 90 80 70 60 25C -40C 85C NF (dB) 4 3.5 3 2.5 2 0 0.5 1 1.5 2 2.5 3 3.5 25C 85C Id (mA) 50 40 30 20 10 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Frequency (GHz) Vd (V) |S21| vs. Frequency 20 18 16 25C -40C 85C |S11| vs. Frequency 0 -5 S11 (dB) -10 -15 -20 -25 -30 0 0.5 1 1.5 2 2.5 Frequency (GHz) 3 3.5 4 25C -40C 85C Gain (dB) 14 12 10 8 6 0 0.5 1 1.5 2 2.5 3 3.5 4 Frequency (GHz) |S12| vs. Frequency 0 -5 S12 (dB) -10 -15 -20 -25 -30 0 0.5 1 1.5 2 2.5 3 3.5 4 Frequency (GHz) 25C -40C 0 -5 -10 S22 (dB) -15 -20 -25 -30 0 0.5 1 |S22| vs. Frequency 85C 25C -40C 85C 1.5 2 2.5 Frequency (GHz) 3 3.5 4 303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 3 http://www.sirenza.com EDS-104747 Rev B SGC-6389Z 0.05-4.0 GHz Cascadable MMIC Amplifier Basic Application Circuit Vs Application Circuit Element Values Reference Designator 100-1000MHz 1000-2200MHz 1uF 1000pF C3 L1 C1 C2 C3 L1 1000pF 100pF 100pF 100nH 6.8pF 6.8pF 6.8pF 39nH 4 RF IN C1 1 SGC-6389Z 3 C2 RF OUT 2 Part Identification Marking & Pinout 1 2 3 Pin # Function Description Part / Evaluation Board Ordering Information Part Number Description Reel Size Devices / Reel 1 RF IN RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation Connection to ground. Use via holes as close to the device ground leads as possible to reduce ground inductance and achieve optimum RF performance SGC-6389Z Lead Free, RoHs Compliant 100-1000 MHz Evaluation Board 13" N/A N/A 3000 N/A N/A 2,4 GND SGC-6389Z-EVB1 SGC-6389Z-EVB2 1000-2200 MHz Evaluation Board 3 RF output and bias pin. This pin requires the use of an RF OUT / external DC blocking capacitor chosen for the frequency of DCBIAS operation. 303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 4 http://www.sirenza.com EDS-104747 Rev B SGC-6389Z 0.05-4.0 GHz Cascadable MMIC Amplifier SOT-89 PCB Pad Layout Dimensions in inches [millimeters] Notes: 1. Provide a large ground pad area under device pins 2 and 4 with several platedthrough holes placed as shown. 2. 1-2 ounce finished copper thickness is recommended. 3. RF I/O lines are 50 RF IN RF Out SOT-89 Nominal Package Dimensions Dimensions in inches [millimeters] A link to the SOT-89 package outline drawing with full dimensions and tolerances may be found on the product web page at www.sirenza.com. 303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 5 http://www.sirenza.com EDS-104747 Rev B |
Price & Availability of SGC-6389Z
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |