View PT6903_4512608.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PT6903 High Brightness LED Driver
DESCRIPTION
PT6903 is a PFM high brightness LED driver control IC. It allows efficient operation of driver current up to 1.0A output, and the input range is from 7V to 36V. Moreover, PT6903 controls the internal MOS at a modulated switch frequency up to 800KHz. PT6903 drives a single or multiple series LEDs at a constant-current control method; thus, providing constant current light output and enhanced reliability. PT6903 has linear and PWM dimming functions. Output current to an LED string can be programmed to any value between its minimum value to its maximum value at the linear dimming control input of PT6903. PT6903 provides a low-frequency PWM dimming input that can accept an external control signal with a duty cycle of 0~100% and a frequency between 100Hz and a few KHz. PT6903 integrates more protection functions. The reliability of LEDs and device can be promoted by these protection functions. PT6903 provides over current protection when output short-circuit or LEDs current rises up about two times setting current. PT6903 must be power-up again if over current protection happens. PT6903 also provides over temperature protection. There are two ways to protect LEDs and device when temperature rises up to limited level. One is internal thermal-shutdown function. If internal temperature rises up about 135, PT6903 will turn off switch. It will turn-on again when internal temperature falls down about 115. Another is temperature compensation function. This function is only used for SOP8 package. An NTC thermistor temperature monitoring circuit can be used to LD pin. When system temperature rises up to some limited level, the voltage on LD pin will fall under 240mV and LED current will fall under setting value. This function can reduce the temperature of system effectively.
FEATURES
* * * * * * * * >90% efficiency Wide input voltage range: 7V to 36V Constant current driver Applications up to 1.0A Linear & PWM dimming Thermal shutdown protection Over current protection Internal 40V power NMOS switch
APPLICATIONS
* DC/DC LED driver * Low voltage industrial LED lighting * Low voltage halogen replacement LEDs * Decorative LED lighting
BLOCK DIAGRAM
Tel: 886-66296288Fax: 886-29174598 http://www.princeton.com.tw2F, 233-1, Baociao Road, Sindian, Taipei 23145, Taiwan
PT6903
TYPICAL APPLICATION
V1.1
2
PT6903
ORDER INFORMATION
Valid Part Number PT6903-S PT6903 Package Type 8 Pins, SOP, 150 MIL 5 Pins, TO252 Top Code PT6903-S PT6903
PIN CONFIGURATION
8 PINS, SOP 5 PINS, TO252
PIN DESCRIPTION
Pin Name RT CS GND SW VIN PWMD VDD LD Description Fixed off-time setting resistor LED string current sense Ground Internal switch Positive input supply voltage PWMD dimming & enable input Internal regulated voltage Linear dimming Pin No. SOP-8 TO252 1 1 2 2 3 3 4 4 5 5 6 7 8
V1.1
3
PT6903 IMPORTANT NOTICE
Princeton Technology Corporation (PTC) reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and to discontinue any product without notice at any time. PTC cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a PTC product. No circuit patent licenses are implied. Princeton Technology Corp. 2F, 233-1, Baociao Road, Sindian, Taipei 23145, Taiwan Tel: 886-2-66296288 Fax: 886-2-29174598 http://www.princeton.com.tw
V1.1
4

▲Up To Search▲

Price & Availability of PT6903

	To Download PT6903 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .