![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CFPV-7 Low Power Miniature SMD VCXO ISSUE 4 - draft; 4 OCTOBER 2004 Delivery Options VoL: <10% Vs Tri-state control (6 pad package only) Control Input Logic `0' (< 30% Vs) will put the output in the tri-state mode Control Input Logic `1' (> 70% Vs) or left unconnected will enable the output `Active High' is standard but a version with `Active Low' can be supplied on request Please contact our sales office for current leadtimes Description Voltage controlled crystal oscillator (VCXO) with crystal packed into its own holder Grounded crystal enclosure acts like a shield and provides low EMI Non PLL based design ensures low jitter 3.3V or 5V supply voltage CMOS, PECL, SINE or LVDS Output Single Ended or Differential PECL Output (option) Load: 50 to Vs-2V Duty Cycle @ 50%: 40/60% Rise & Fall Time (20%-80%): < 0.5ns typ. VoH: 2.4V typ. @Vs=3.3V VoL: 1.5V typ. @Vs=3.3V Tri-state control The output is enabled if tri-state control is:a) Left open circuit b) Connected to GND c) Connected to a voltage <(Vs-1.65V) = PECL logic low The output is disabled if tri-state control is:a) Connected to Vs b) Connected to a voltage >(Vs-0.96V) = PECL logic high When disabled, pad 5 goes low and pad 4 goes high. The tri-state control pad has an internal 75k pull down to GND resistor RoHS Compliance Parts with the suffix `LF' on the part number are fully comliant with the European Union directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Note: The RoHS compliant parts are suitable for assembly using both Lead-free solders (see Lead-free Reflow soldering profile) and Tin / Lead solders (see Tin / Lead Reflow soldering profile) SURFACE MOUNT VCXOs Standard Frequencies 8.192, 20.0, 24.576, 32.768, 34.368, 38.88, 39.3216, 44.736, 50.0, 51.84, 52.0, 61.44, 63.8976, 77.76, 80.0, 82.3341, 140.0, 155.52MHz Sine Output (option) Frequency Range Load: 50 Level: can be specified up to +8dBm Harmonics: < -20dBc 2.0 to 170MHz Package Outline 4-pad (style 578) or 6-pad (style 579) Industry Standard, Glass Epoxy laminate (FR4) based with standard Tin/Lead solder finish end terminations and High Temperature Plastic cover LVDS Output (option) Load: 100 differential +10pF each output to GND Diff. output voltage: 250mV min. 400mV max. Duty Cycle @ 50%: 40/60% Rise & Fall Time (20 to 80%): <0.5ns typ. Tri-state control (6 pad package only) Control Input Logic `0' (0.8V) will put the output in tri-state mode Control Logic'1' (>2.0V) will enable the output Supply Current 3.3V 5% (option) 5.0V 5% (option) Supply Voltage Ranging from typ. 10mA @ 2MHz/3.3V CMOS to typ. 80mA @ 170MHz/5V PECL, at nominal load. Contact sales office for specific values Frequency Stability CMOS Output (option) Load: 15pF nom. Duty Cycle @ 50%: 40/60% Rise & Fall Time (20 to 80%): < 2ns typ. VoH: >90% Vs Fax: +44 (0)1460 72578 Fax: +1 919 941 9371 Fax: +86 755 8826 5990 All causes stability (including calibration, temperature, supply, load, reflow and ageing) can be specified down to 30ppm, 0 to 70C or 50ppm, -40 to 85C. Please specify operating condition; Temperature Range, Lifetime, etc. Europe Tel: +44 (0)1460 270200 Americas Tel: +1 919 941 9333 Asia Tel: +86 755 8826 5991 Website: www.cmac.com Control Voltage Range Output type All causes stability Temperature range Lifetime Package style RoHS compliance Other requirements 1.65V 1.35V (Vs = 3.3V) 2.5V 2.0V (Vs = 5.0V) Frequency Pulling >60ppm standard, other values on request Positive Transfer Function Modulation Bandwidth > 10kHz Input Impedance >100k Linearity (MIL-PRF-55310) < 10% Outline in mm - (4 pad) (Style 578) Tri-state / Enable Control and Differential Output are not available in this package. 0.2 14.10.1 Pad Connections 1. Voltage Control 2. GND 3. Output 4. +Vs 9.100.1 5.90.2 SURFACE MOUNT VCXOs Jitter (rms, typ. @ 155.52 MHz) 12kHz to 5MHz 12kHz to 20MHz 12kHz to 80MHz 0.18ps 0.36ps 0.72ps Phase Noise (typ. @ 155.52MHz) 100Hz 1kHz 10kHz >100Hz -75dBc/Hz -105dBc/Hz -130dBc/Hz -145dBc/Hz 0.1 A 1.4 2.54 2.54 2 0.2 3.5 A 4 3 1.0 Solder pad layout 5.08 2.54 8.128 9.100.1 5.90.2 0.2 3.5 A 6 54 1.0 Solder pad layout 5.08 1.27 2.54 1 Marking Model number Frequency Environmental Specification Storage: -40 to 100C Vibration: IEC 60068-2-6 Test Fc Procedure B4, 10 - 60Hz 0.75mm displacement, 60 - 500Hz, 98.1m/s2 (10gn) acceleration, 30 minutes in each of three mutually perpendicular planes at 1 octave per minute Shock: IEC 60068-2-27 Test Ea, 981m/s2 (100gn) acceleration for 6ms duration, 3 shocks in each direction along three mutually perpendicular axes Soldering: SMD product, suitable for Convection Reflow soldering. Peak temperature 230C. Maximum time 200C, 90 secs. Sealing: Non hermetic package Marking: Label resistant to all common solvents 1.27 Outline in mm - (6 pad) (Style 579) Pad Connections 1. Voltage Control 2. Enable/Tri-state control 3. GND 4. Output 1 5. Output 2 6. +Vs 1.4 0.2 14.10.1 0.1A 2.54 1 2.54 23 Solder Conditions For typical soldering conditions, please see the relevant page in the Application Notes Minimum Order Information Required Frequency Supply voltage Europe Tel: +44 (0)1460 270200 Americas Tel: +1 919 941 9333 Asia Tel: +86 755 8826 5991 Fax: +44 (0)1460 72578 Fax: +1 919 941 9371 Fax: +86 755 8826 5990 Website: www.cmac.com 8.128 Lead Free Reflow Soldering Profile * 300 Time above 217C: 60 to 150 secs Time 25C to Peak Temp: 480 sec max Peak Temp +0 260C -5 C 20 to 40 sec 200 150C to 200C m ax o Co o ld n, w 60 to 180 seconds cm se C/ 6 100 50 3 C/ se c ax SURFACE MOUNT VCXOs Tin / Lead Reflow Soldering Profile * 300 Time above 183C: 60 to 150 secs Time 25C to Peak Temp: 360 sec max Peak Temp +0 240C -5 C 10 to 30 sec 200 100C to 150C m ax o Co o ld n, w 60 to 120 seconds cm se C/ 6 100 50 3 C/ se c ax *Note: These profiles were used during the qualification testing of the product and therefore represent worst case conditions. They are not recommended for use by the customer in the actual assembly of these parts. Europe Tel: +44 (0)1460 270200 Americas Tel: +1 919 941 9333 Asia Tel: +86 755 8826 5991 Fax: +44 (0)1460 72578 Fax: +1 919 941 9371 Fax: +86 755 8826 5990 Website: www.cmac.com |
Price & Availability of CFPV-7
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |