![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number : EN8708 CPH6528 SANYO Semiconductors DATA SHEET CPH6528 Applications * PNP / NPN Epitaxial Planar Silicon Transistor Push-Pull Circuit Applications MOSFET gate drivers, relay drivers, lamp drivers, motor drivers. Features * * Composite type with a PNP / NPN transistor contained in one package, facilitating high-density mounting. Ultrasmall package permitting applied sets to be small and slim. Specifications ( ) : PNP Absolute Maximum Ratings at Ta=25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Mounted on a ceramic board (600mm2!0.8m) 1unit Conditions Ratings (--30)40 (--30)30 (--)5 (--)700 (--)1.4 0.6 150 --55 to +150 Unit V V V mA A W C C Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Symbol ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO Conditions VCB=(--)30V, IE=0A VEB=(--)4V, IC=0A VCE=(--)2V, IC=(--10)50mA VCE=(--)2V, IC=(-)50mA VCB=(--)10V, f=1MHz IC=(--)200mA, IB=(-)10mA IC=(--)200mA, IB=(-)10mA IC=(--)10A, IE=0A IC=(--)1mA, RBE= IE=(--)10A, IC=0A (--30)40 (-)30 (--)5 (200)300 (520)540 (4.7)3.3 (-110)85 (--220)190 (--)0.9 (--)1.2 Ratings min typ max (--)100 (--)100 (500)800 MHz pF mV V V V V Unit nA nA Marking : EL Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 80906 / 22006EA MS IM TB-00002078 No.8708-1/5 CPH6528 Package Dimensions unit : mm 7018-006 0.4 0.15 Electrical Connection 6 5 4 6 5 4 0.6 0.2 0.6 1.6 2.8 0.05 1 2 3 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 Top view 1 0.95 2 2.9 3 0.7 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 SANYO : CPH6 0.2 0.9 -mA 40mA --700 IC -- VCE -A mA 30m --25 [PNP] A --20m A --15m A --10m 7mA ---5mA 700 IC -- VCE A 15m A 20mA [NPN] 5mA 10 mA 7mA --600 600 Collector Current, IC -- mA Collector Current, IC -- mA --50 30m --500 500 3mA 2mA 1mA --400 --1mA --200 50m --300 300 A --3mA --2mA 400 200 400A 200A --500A --100 0 0 100 IB=0A --100 --200 --300 --400 --500 --600 --700 --800 --900 --1000 0 0 IB=0A 100 200 300 400 500 600 700 800 900 1000 Collector-to-Emitter Voltage, VCE -- mV --800 --700 IT05049 IC -- VBE Collector-to-Emitter Voltage, VCE -- mV 800 700 IT05082 [PNP] VCE= --2V IC -- VBE [NPN] VCE=2V Collector Current, IC -- mA Collector Current, IC -- mA --600 --500 --400 600 500 400 300 200 100 0 Ta=7 5 C 25C --25C --300 --200 --100 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT05050 0 0.2 0.4 0.6 Ta=7 5 0.8 --25C C 25C 1.0 IT05083 Base-to-Emitter Voltage, VBE -- V Base-to-Emitter Voltage, VBE -- V No.8708-2/5 CPH6528 1000 7 5 hFE -- IC Ta=75C 25C [PNP] VCE= --2V 1000 hFE -- IC Ta=75C 25C --25C [NPN] VCE=2V 7 DC Current Gain, hFE DC Current Gain, hFE 2 3 5 7 --100 2 3 5 7--1000 IT05051 --25C 3 2 5 3 100 7 5 3 --1.0 2 2 3 5 7 --10 100 1.0 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05084 Collector Current, IC -- mA --1000 7 VCE(sat) -- IC Collector Current, IC -- mA 1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 1.0 2 3 5 7 10 2 3 5 7 100 2 3 [PNP] IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV VCE(sat) -- IC [NPN] IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 C 75 --100 7 5 3 2 2 Ta= 5C 5 --2 C 7 Ta= 5 C 2 --10 --1.0 2 3 5 7 --10 2 5C --2 5 C 3 5 7 --100 2 3 5 7--1000 IT05054 5 7 1000 IT05085 Collector Current, IC -- mA 3 2 VCE(sat) -- IC Collector Current, IC -- mA 1000 7 [PNP] IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV VCE(sat) -- IC [NPN] IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 5 3 2 --1000 7 5 3 2 --100 7 5 3 2 --10 --1.0 100 7 5 3 2 C 75 7 Ta= 5C 5 C --2 = Ta C 25 C 25 5 C --2 2 3 5 7 --10 2 3 5 7 --100 2 3 Collector Current, IC -- mA --10 7 5 7--1000 IT05055 10 1.0 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05086 VBE(sat) -- IC Collector Current, IC -- mA 10 7 [PNP] IC / IB=20 Base-to-Emitter Saturation Voltage, VBE(sat) -- V VBE(sat) -- IC [NPN] IC / IB=20 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 5 3 2 5 3 2 --1.0 7 5 3 2 Ta= --25C 75C 25C 1.0 7 5 3 2 Ta= --25C 25C 75C --0.1 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 Collector Current, IC -- mA 5 7--1000 IT05056 0.1 1.0 2 3 5 7 10 2 3 5 7 100 2 3 Collector Current, IC -- mA 5 7 1000 IT05087 No.8708-3/5 CPH6528 10 Cob -- VCB [PNP] f=1MHz 10 Cob -- VCB [NPN] f=1MHz Output Capacitance, Cob -- pF Output Capacitance, Cob -- pF 2 3 5 7 2 3 5 IT05053 7 7 5 5 3 3 2 2 0.1 --1.0 --10 1.0 1.0 2 3 5 7 10 2 3 5 IT05088 Collector-to-Base Voltage, VCB -- V 1000 fT -- IC Collector-to-Base Voltage, VCB -- V 1000 [PNP] VCE= --10V Gain-Bandwidth Product, fT -- MHz fT -- IC [NPN] VCE=10V Gain-Bandwidth Product, fT -- MHz 7 7 5 5 3 3 2 2 100 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 Collector Current, IC -- mA 3 2 1.0 5 7--1000 IT05052 100 1.0 2 3 5 7 10 2 3 5 7 100 2 3 ASO ICP=1.4A Collector Current, IC -- mA 0.7 5 7 1000 IT05089 [PNP/NPN] PC -- Ta [PNP/NPN] Collector Dissipation, PC -- W Collector Current, IC -- A 7 5 3 2 0.1 7 5 3 2 IC=0.7A DC 1m 0.6 M 10 s 0 s ou 10 op er 0.5 nt ed 50 0m on s 0 s ms 10 ac 0.4 er am ati ic on bo 0.3 ar d (6 00 m 0.2 m2 ! 0.01 0.1 Ta=25C Single pulse For PNP, minus sign is omitted. Mounted on a ceramic board (600mm2!0.8mm) 1unit 2 3 5 7 1.0 2 3 5 7 10 2 3 5 0. 8m m 0.1 0 0 20 40 60 80 100 120 )1 un it 160 140 Collector-to-Emitter Voltage, VCE -- V IT10759 Ambient Temperature, Ta -- C IT10000 No.8708-4/5 CPH6528 Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2006. Specifications and information herein are subject to change without notice. PS No.8708-5/5 |
Price & Availability of CPH6528
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |