 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IR-Lumineszenzdiode (850 nm) mit hoher Ausgangsleistung High Power Infrared Emitter (850 nm) Lead (Pb) Free Product - RoHS Compliant SFH 4550 Wesentliche Merkmale * * * * Infrarot LED mit hoher Ausgangsleistung Enger Abstrahlwinkel 3 Sehr hohe Strahlstarke Emissionswellenlange typ. 850 nm Features * * * * High Power Infrared LED Narrow emission angle 3 Very high radiant intensity Peak wavelength typ. 850 nm Anwendungen * Infrarotbeleuchtung fur CMOS Kameras * Sensorik * Datenubertragung Sicherheitshinweise Je nach Betriebsart emittieren diese Bauteile hochkonzentrierte, nicht sichtbare InfrarotStrahlung, die gefahrlich fur das menschliche Auge sein kann. Produkte, die diese Bauteile enthalten, mussen gema den Sicherheitsrichtlinien der IEC-Normen 60825-1 und 62471 behandelt werden. Applications * Infrared Illumination for CMOS cameras * Sensor technology * Data transmission Safety Advices Depending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1 and IEC 62471. Typ Type SFH 4550 1) Bestellnummer Ordering Code Q65110A1772 Strahlstarkegruppierung1) (IF = 100 mA, tp = 20 ms) Radiant Intensity Grouping1) Ie (mW/sr) 400 (typ. 700) gemessen bei einem Raumwinkel = 0.001 sr / measured at a solid angle of = 0.001 sr ATTENTION - Observe Precautions For Handling - Electrostatic Sensitive Device 2007-03-29 1 SFH 4550 Grenzwerte (TA = 25 C) Maximum Ratings Bezeichnung Parameter Betriebs- und Lagertemperatur Operating and storage temperature range Sperrspannung Reverse voltage Vorwartsgleichstrom Forward current Stostrom, tp = 10 s, D = 0 Surge current Verlustleistung Power dissipation Symbol Symbol Wert Value - 40 ... + 100 5 100 1.5 180 450 Einheit Unit C V mA A mW K/W Top , Tstg VR IF IFSM Ptot Warmewiderstand Sperrschicht - Umgebung bei RthJA Montage auf FR4 Platine, Padgroe je 16 mm2 Thermal resistance junction - ambient mounted on PC-board (FR4), padsize 16 mm2 each Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Wellenlange der Strahlung Wavelength at peak emission IF = 100 mA Spektrale Bandbreite bei 50% von Imax Spectral bandwidth at 50% of Imax IF = 100 mA Abstrahlwinkel Half angle Aktive Chipflache Active chip area Abmessungen der aktiven Chipflache Dimension of the active chip area Schaltzeiten, Ie von 10% auf 90% und von 90% auf 10%, bei IF = 100 mA, RL = 50 Switching times, e from 10% to 90% and from 90% to 10%, IF = 100 mA, RL = 50 Symbol Symbol peak Wert Value 850 Einheit Unit nm 35 nm 3 0.09 0.3 x 0.3 12 Grad deg. mm2 mm ns A LxB LxW tr , tf 2007-03-29 2 SFH 4550 Kennwerte (TA = 25 C) Characteristics (cont'd) Bezeichnung Parameter Durchlassspannung Forward voltage IF = 100 mA, tp = 20 ms IF = 1 A, tp = 100 s Sperrstrom Reverse current VR = 5 V Gesamtstrahlungsfluss Total radiant flux IF = 100 mA, tp = 20 ms Symbol Symbol Wert Value Einheit Unit VF VF IR 1.5 (< 1.8) 2.4 (< 3.0) V V not designed for A reverse operation 50 mW e typ Temperaturkoeffizient von Ie bzw. e, TCI IF = 100 mA Temperature coefficient of Ie or e, IF = 100 mA Temperaturkoeffizient von VF, IF = 100 mA Temperature coefficient of VF, IF = 100 mA Temperaturkoeffizient von , IF = 100 mA Temperature coefficient of , IF = 100 mA - 0.5 %/K TCV TC - 0.7 + 0.2 mV/K nm/K 2007-03-29 3 SFH 4550 Strahlstarke Ie in Achsrichtung1) gemessen bei einem Raumwinkel = 0.001 sr Radiant Intensity Ie in Axial Direction at a solid angle of = 0.001 sr Bezeichnung Parameter Symbol SFH 4550-DW Strahlstarke Ie min Radiant intensity Ie max IF = 100 mA, tp = 20 ms Strahlstarke Radiant intensity IF = 1 A, tp = 100 s 1) Werte Values SFH 4550-EW 630 1250 7000 SFH 4550-FW 1000 2000 9000 400 800 5000 Einheit Unit mW/sr mW/sr mW/sr Ie typ Nur eine Gruppe in einer Verpackungseinheit (Streuung kleiner 2:1) / Only one group in one packing unit (variation lower 2:1) Abstrahlcharakteristik Radiation Characteristics Irel = f () 40 30 20 10 0 1.0 OHL01718 50 0.8 0.6 60 0.4 70 0.2 80 90 100 1.0 0.8 0.6 0.4 0 20 40 60 80 100 120 0 2007-03-29 4 SFH 4550 Relative Spectral Emission Irel = f () 100 % OHL01714 Radiant Intensity Ie = f (IF) Ie 100 mA OHL01715 Single pulse, tp = 20 s 101 Max. Permissible Forward Current IF = f (TA), RthJA = 450 K/W 125 OHR00880 Ie I e (100 mA) 10 5 0 F mA 100 I rel 80 60 75 10-1 40 5 50 10-2 20 5 25 0 700 750 800 850 nm 950 10-3 0 10 5 10 1 5 10 2 mA 10 3 0 0 20 40 60 IF 80 C 100 T Forward Current IF = f (VF) Single pulse, tp = 20 s Permissible Pulse Handling Capability IF = f (), TA = 25 C, duty cycle D = parameter OHL01713 IF 10 A 0 1.6 IF A 1.4 1.2 1.0 0.8 0.6 OHF02505 D = TP t tP IF T 10 -1 5 D= 0.005 0.01 0.02 0.033 0.05 0.1 0.2 0.5 1 10 -2 5 10 -3 5 0.4 0.2 0 0.5 1 1.5 2 2.5 V 3 10 -4 VF 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2007-03-29 5 SFH 4550 Mazeichnung Package Outlines 9.0 (0.354) 8.2 (0.323) Area not flat 7.8 (0.307) 7.5 (0.295) 5.9 (0.232) 5.5 (0.217) Cathode o5.1 (0.201) 1.8 (0.071) 1.2 (0.047) 29 (1.142) 27 (1.063) 2.54 (0.100) spacing 0.8 (0.031) 0.5 (0.020) 0.6 (0.024) 0.4 (0.016) o4.8 (0.189) 5.7 (0.224) 5.1 (0.201) Chip position 0.6 (0.024) 0.4 (0.016) GEXY6271 Mae in mm (inch) / Dimensions in mm (inch). Empfohlenes Lotpaddesign Recommended Solder Pad Design Wellenloten TTW TTW Soldering Anode 4 (0.157) OHLPY985 Mae in mm (inch) / Dimensions in mm (inch). 2007-03-29 4.8 (0.189) 6 SFH 4550 Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering 300 C T 250 235 C ... 260 C 2. Welle 2. wave 200 1. Welle 1. wave 150 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling ca 200 K/s 5 K/s 2 K/s (nach CECC 00802) (acc. to CECC 00802) OHLY0598 10 s Normalkurve standard curve Grenzkurven limit curves 0 0 50 100 150 t 200 s 250 Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2007-03-29 7 |
Price & Availability of SFH4550
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |
