|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
RB886CS Diodes Schottky barrier diode RB886CS Applications High frequency detection External dimensions (Unit : mm) Land size figure (Unit : mm) 0.55 0.60.05 0.90.05 1.00.05 Features 1) Ultra small mold type. (VMN2) 2) Low Ct and high detection efficiency. 0.45 0.160.05 VMN2 Construction Silicon epitaxial planar 0.156 0.350.1 0.370.03 Structure ROHM : VMN2 dot (year week factory) + day Taping specifications (Unit : mm) 40.1 20.05 1.55 0.20.05 1.750.1 3.50.05 0.45 1.10.05 0.5 0.70.05 20.05 4.00.1 0.52 Absolute maximum ratings (Ta=25C) Parameter Symbol VR Reverse voltage IF Average rectified forward current Junction temperature Tj Storage temperature Tstg Limits 5.0 10 125 -40 to +125 Unit V mA Electrical characteristics (Ta=25C) Parameter Symbol 8.00.2 Forward voltage Reverse current Capacitance between terminals VF IR Ct Min. - Typ. 0.53 Max. 0.35 120 0.80 Unit V A pF Conditions IF=1.0mA VR=5.0V VR=1.0V , f=1MHz 0.5 1/2 RB886CS Diodes Electrical characteristic curves (Ta=25C) 10 1000 Ta=125 1 f=1MHz FORWARD CURRENT:IF(mA) REVERSE CURRENT:IR(uA) 1 Ta=-25 Ta=25 0.1 Ta=75 Ta=125 0.01 0 300 600 900 1200 FORWARD VOLTAGEVF(mV) VF-IF CHARACTERISTICS 1500 100 Ta=75 Ta=25 10 Ta=-25 1 0 1 2 3 4 REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 5 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 0.1 0 1 2 3 4 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 5 1 300 300 Ta=25 VF=1mA n=30pcs 250 200 150 100 50 0 VF DISPERSION MAP IR DISPERSION MAP AVE:21.63uA Ta=25 VR=5V n=30pcs 0.9 FORWARD VOLTAGE:VF(mV) REVERSE CURRENT:IR(uA) CAPACITANCE BETWEEN TERMINALS:Ct(pF) 290 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Ta=25 f=1MHz VR=1V n=10pcs 280 270 AVE:0.520pF 260 AVE:275.2mV 250 Ct DISPERSION MAP 1000 Rth(j-a) 5 TRANSIENT THAERMAL IMPEDANCE:Rth (/W) Rth(j-c) 100 Mounted on epoxy board IM=1mA IF=10mA ELECTROSTATIC DISCHARGE TEST ESD(KV) 4 3 AVE:1.47kV 2 AVE:0.48kV 1 C=200pF R=0 C=100pF R=1.5k 1m time 300u 10 0.001 0 0.01 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 0.1 1000 ESD DISPERSION MAP 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |