View LP6-EWN1-03-N3_1266965.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) SMD LED
Model # LP6-EWN-03-N3 Data Sheet
120-degree, 6.0 x 5.0 mm, SMT LED in white color with water-transparent lens
Applications
* * * * Indicators Illuminations LCD Back Lights Automobile Applications
Absolute Maximum Ratings (TA = 25C)
Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient
Note 2 Note 1
Symbol IF IFP VR PD Topr Tstg TJ RTHJA RTHJS
Absolute Maximum Rating 3 x 50 3 x 100 5 3 x 240 -40 ~ +100 -40 ~ +100 110 3 x 300 3 x 160
Unit mA mA V mW C C C C/W C/W
Junction/Solder Point
1. 2.
Notes:
Pulse width 0.1 msec, duty 1/10. Rth test condition: mounted on PCB FR4 (pad size 40 mm2)
Typical Electrical & Optical Characteristics (TA = 25C )
Characteristics Forward Voltage Reverse Current Symbol VF IR IV V x y 21/2 Condition IF = 3 x 50 mA VR = 5 V IF = 3 x 50 mA IF = 3 x 50 mA IF = 3 x 50 mA IF = 3 x 50 mA IF = 3 x 50 mA deg Unit V A mcd mlm 7100 10000 27000 0.31 0.32 120 Minimum Typical 3.8 Maximum 4.8 10
D-CT167.000 Data Sheet: CL
Luminous Intensity Luminous Flux Chromaticity Coordinates 50% Power Angle
Subject to change without notice. www.cree.com/ledlamps
Standard Bins for LP6-EWN-03-N3 (IF = 3 x 50 mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown. Orders for LP6-EWN1-03-N3 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 3 x 50 mA. A1 A2 B1 B2 c Z6 or above Z5(V) 11200 mcd (29 lm) Z4(U) 9000 mcd (23 lm) Z3(T) 7100 mcd (18 lm)
Luminous Intensity (IV) & Flux (lm)
14000 mcd (42 lm)
Chromaticity Coordinates (x,y)
Rank Chromaticity x Coordinates y
0.245 0.229 0.264 0.267
A1
0.280 0.248 0.264 0.220 0.264 0.267 0.283 0.305
A2
0.296 0.276 0.280 0.248 0.283 0.305 0.307 0.337
B1
0.313 0.297 0.296 0.276
Rank Chromaticity x Coordinates y
0.307 0.337 0.330 0.360
B2
0.330 0.318 0.313 0.297 0.330 0.360 0.361 0.385
c
0.356 0.351 0.330 0.318
Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is 10%. 3. Tolerance of measurement of the color coordinates is 0.01. 4. Tolerance of measurement of VF is 0.05 V. 5. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging" document. 6. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 7. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely. 8. Do not handle the device by the SMD surface. Care must be taken to avoid damage to the SMD surface or the interior of the device, which can be damaged by excessive force to the SMD surface.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT67.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
CIE Chromaticity Diagram
CIE Chromaticity Diagram
0.90
CIE
520
0.80
530 510 540 550 560
0.70
0.60
490
0.50
570 580 590
Y
0.40
c B2
600 610 620 630
0.30
480
A1
B1 A2
0.20
470
0.10
460
0.00 0.00 0.10 0.20 0.30
X
0.40
0.50
0.60
0.70
0.80
4/5
Format #: COTCO-D-074
REV.4
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
3
CLD-CT67.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Graphs
Document No. Rev. No.
SPE/LP6-EWN1-03-N3 02
Graphs
100.0 80.0 60.0 40.0 20.0 0.0 Vf(V) 3.0 3.4 3.8 4.2 4.6 5.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. If (mA) Vr(V) -50 -40 -30 -20 -10 0 0.0 -10.0 -20.0 -30.0 -40.0 -50.0
FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE.
2.5 2.0 1.5 1.0 0.5 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0
Half Power WL=150nm 100% 75% 50% 25% 0% 400 500 600 700 800
FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT
FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH.
100 80 60 40 20 0
IF(mA)
50% Power Angle : 0 Rth j-s=160 C/W
Ie(%) 100% 80% 60% 40%
Rth j-a=300C/W 0 20 40 60 80
20% T ( C) 100 -90 -60 -30 0 30 60 90 0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C
FIG.6 FAR FIELD PATTERN
Items Prepared by Checked by Approved by FCN#
Signatures
WangFJ XieJH DavidLiu
Date
2007-05-08 2007-05-08 2007-05-08 Rev.No 02 Date
Revision History
Change Description 2007-05-08 Change Dimension Drawing
FCN20070120
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco reserved. The information in this document is subject to change without notice. Cree and the Copyright (c) 2007 Cree, Inc. All rights International Ltd. Cree logo are registered trademarks of Cree, Inc. CLD-CT67.000
Mechanical Dimensions
Document No. Rev. No. Dimension Drawing
SPE/LP6-EWN1-03-N3 02
All dimensions are in mm.
ations g ngs at Ta = 25C mbol IF IFP VR PD
opr
Absolute maximum Rating 3 x 50 3 x 100 5 3 x 240 -40 ~ + 100 -40 ~ + 100 +110 3 x 300 3 x 160
Unit mA mA V mW C C C C /W C /W
2
Tstg Tj th JA th JS
y <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=40mm )
cal Characteristics ( Ta = 25C) ) Symbol VF IR
V
Condition IF = 3 x 50mA
Min. -------
Typ. 3.8 --27000
Max. 4.8 10 ---
Unit V A mlm mcd
Notes
VR = 5V
RoHS Compliance
IF =3 x 50mA
IV x y
7100 10000 --The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the IF = limits) permitted --- such substances, or are used in an exempted application, in accordance with EU Direc0.31 ----threshold 3 x 50mA for tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS),= 3 amended through April 21, 2006. --0.32 ----I as x 50mA
F
IF = 3 x 50mA
2 1/2 VisionIF = 3 x 50mA Advisory Claim
---
120
---
deg
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT67.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request *
Packing type Product P/N
0: Standard = tape pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number LP6-EWN1-03-N3-00001 LP6-EWN1-03-N3-00002 Description SMD 120 White, FULL RANK, Tape & Reel SMD 120 White, A1, A2, B1, B2, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
6
CLD-CT67.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps

▲Up To Search▲

Price & Availability of LP6-EWN1-03-N3

	To Download LP6-EWN1-03-N3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .