|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
T0980 SiGe Transmit / Receive Front End IC Description The T0980 is a monolithic SiGe transmit/ receive front end IC with power amplifier & low noise amplifier. Electrostatic sensitive device. Observe precautions for handling. Features D High power added efficient power amplifier (Pout typ. 29 dBm) D Controlled output power D Low noise preamplifier (NF typ. 1.7 dB) D Few external components D PSSO16 plastic package with down set paddle Block Diagram 16 13 11 9 Bias 1 3 5 Figure 1. Block diagram 8 Ordering Information Extended Type Number T0980-TJS T0980-TJQ Package PSSO16 PSSO16 Tube Taped and reeled Remarks Rev. A4, 08-Dec-00 1 (7) Preliminary Information T0980 Pin Description Pin 1 Symbol V2_PA_OUT Function Inductor to power supply and matching network for power amplifier output Inductor to power supply and matching network for power amplifier output Ground POUT_ CONTROL GND LNA_IN GND BIAS_LNA 4 T0980 5 6 7 8 12 PA_IN 13 GND V2_PA_OUT 1 V2_PA_OUT 2 GND 3 16 V2_PA_OUT 15 GND 14 V1_PA 2 V2_PA_OUT 3 4 5 6 7 8 9 10 11 12 13 14 15 16 GND POUT_CONTROL Power amplifier control input GND Ground LNA_IN GND BIAS_LNA VS_CTRL LNA_OUT GND PA_IN GND V1_PA GND V2_PA_OUT Low noise amplifier input Ground Resistor to Vs sets the LNA current Supply voltage for control of power amplifier Low noise amplifier output and supply voltage Ground Power amplifier input Ground Supply voltage for power amplifier Ground Matching network for power amplifier output 11 GND 10 LNA_OUT 9 VS_CTRL Figure 2. Pinning PSSO16 Absolute Maximum Ratings All voltages are referred to GND Parameter Supply voltage PA, TX Supply voltage LNA, RX Junction temperature Storage temperature Pins 1, 2, 9 and 14 Pin 10 Symbol Vs_PA Vs_LNA Tjmax Tstg -55 Min. Max. 4.5 2.8 150 +125 Unit V V _C _C Operating Range All voltages are referred to GND. The following table represents the sum of all supply currents. Parameter Supply voltage PA Supply voltage LNA Supply current PA Test Conditions / Pins TX, RX, TX, Pins 1, 2, 9 and 14 Pin 10 Pins 1, 2, 9 and 14 Symbol Vs_PA Vs_LNA Is_PA Min. Typ. 3.6 2.5 400 Max. 4.4 2.6 Unit V V mA 2 (7) Rev. A4, 08-Dec-00 Preliminary Information T0980 Operating Range (continued) All voltages are referred to GND. The following table represents the sum of all supply currents. Parameter Test Conditions / Pins Symbol Min. Typ. Max. Supply current LNA Ambient temperature Pins 10 and 8 Is_LNA Tamb -25 2.5 25 60 Unit mA _C Thermal Resistance Parameter Junction ambient Symbol RthJA Value 25 Unit K/W ESD Protection: t.b.d. Electrical Characteristics Test conditions (unless otherwise specified) : Vs_PA = 3.6 V, Tamb = 25 C. Parameter Power amplifier Supply voltage Supply current Frequency range Power gain Control voltage g Control current Shut-down mode Power added efficiency Saturated output power Harmonics Low-noise amplifier Supply voltage Supply current Frequency range Power gain Noise figure Isolation 3rd-order input interception point Notes : 1) RX, Pins 8 and 10 RX @ R1 = 5.6 kW, Pins 8 and 10 RX RX @ R1 = 5.6kW, Is=2.5 mA RX @ R1 = 5.6 kW, Is=2.5 mA RX @ R1 = 5.6 kW, Is=2.5 mA RX @ R1 = 5.6 kW, Is=2.5 mA Vs_LNA Is_LNA f Gp NF ISO IIP3 400 19 1.7 20 -10 2.5 2.5 2.5 500 V mA MHz dB dB dB dBm 1) Test Conditions / Pins TX, Pins 1, 2, 9 and 14 TX, Pins 1, 2, 9 and 14 TX TX TX, output power (max), Pin 4 TX, output power (min), Pin 4 Pin 4 Control voltage 0.1 V, Pins 1, 2, 9 and 14 TX @ 450 MHz TX, input power 3 dBm TX, input power 3 dBm TX, input power 3 dBm Symbol Vs_PA Is_PA f Gp Min. Typ. 3.6 400 Max. Unit V mA 400 33 2.5 0.7 0 500 MHz dB V V 400 10 A A % Is_PA PAE Psat 2 fo 3 fo 50 29 -20 -20 dBm dBc dBc Power amplifier shall be unconditional stable, maximum duty cycle 100%, true cw-operation, maximum load mismatch 10:1 for 5 s @ 3.6 V Rev. A4, 08-Dec-00 3 (7) Preliminary Information T0980 Typical Characteristics 70 60 50 Pout ( dBm ) Gain ( dB ) PAE ( % ) 40 30 20 10 0 -10 -20 -50 -40 -30 -20 -10 0 10 20 10 0 0 1 2 3 4 5 Pin ( dBm ) VCC ( V ) Gain Pout PAE PAE ( % ) Pout ( dBm ) 70 60 50 40 30 20 Pout PAE Figure 3. Power sweep Figure 5. VCC sweep 70 60 PAE 50 PAE ( % ) Pout ( dBm ) 40 30 Pout 20 10 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Vramp ( V ) Figure 4. Ramp sweep 4 (7) Rev. A4, 08-Dec-00 Preliminary Information T0980 Application Circuit T0980 (460 MHz) C12 1uF VS_PA C2 C9 100pF 1uF L5 22nH C11 100pF L6 4.7nH L4 6.8nH C8 2.7pF GND PA_OUT C10 12pF 1 2 3 16 15 L1 1.5nH T0980 Bias 14 C1 POUT_CTRL C15 C14 LNA_IN L7 22nH 100pF 4 C13 100pF 13 12 C3 100pF 1nF 5 6 7 8 PA_IN R3 39 8.2pF L2 39nH 11 10 C5 3.9pF LNA_OUT L3 C4 R2 NC 22nH BIAS_LNA C16 NC 9 R1 5.6k 0 VS_LNA C6 100pF C18 10nF VS_CTRL C7 100pF C17 NC Figure 6. Typical application circuit T0980 (460 MHz) Rev. A4, 08-Dec-00 5 (7) Preliminary Information T0980 Package Information 6 (7) Rev. A4, 08-Dec-00 Preliminary Information T0980 Ozone Depleting Substances Policy Statement It is the policy of Atmel Germany GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Atmel Germany GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Atmel Germany GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Atmel Wireless & Microcontrollers products for any unintended or unauthorized application, the buyer shall indemnify Atmel Wireless & Microcontrollers against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Data sheets can also be retrieved from the Internet: http://www.atmel-wm.com Atmel Germany GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2594, Fax number: 49 (0)7131 67 2423 Rev. A4, 08-Dec-00 7 (7) Preliminary Information |
Price & Availability of T0980NBSP |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |