 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FDMA1029PZ Dual P-Channel PowerTrench(R) MOSFET May 2006 FDMA1029PZ Dual P-Channel PowerTrench(R) MOSFET General Description This device is designed specifically as a single package solution for the battery charge switch in cellular handset and other ultra-portable applications. It features two independent P-Channel MOSFETs with low on-state resistance for minimum conduction losses. bi-directional current flow is possible. The MicroFET 2x2 package offers exceptional thermal performance for its physical size and is well suited to linear mode applications. PIN 1 S1 G1 D1 D2 D2 When * RoHS Compliant connected in the typical common source configuration, Features * -3.1 A, -20V. RDS(ON) = 95 m @ VGS = -4.5V RDS(ON) = 141 m @ VGS = -2.5V * Low profile - 0.8 mm maximum - in the new package MicroFET 2x2 mm S1 G1 1 2 3 6 5 4 D1 G2 S2 D1 G2 S2 MicroFET 2x2 D2 Absolute Maximum Ratings Symbol VDS VGS ID PD TJ, TSTG Drain-Source Voltage Gate-Source Voltage Drain Current - Continuous - Pulsed TA=25oC unless otherwise noted Parameter Ratings -20 12 (Note 1a) Units V V A W C -3.1 -6 1.4 0.7 -55 to +150 Power Dissipation for Single Operation (Note 1a) (Note 1b) Operating and Storage Junction Temperature Range Thermal Characteristics RJA RJA RJA RJA Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Ambient (Note 1a) (Note 1b) (Note 1c) (Note 1d) 86 (Single Operation) 173 (Single Operation) 69 (Dual Operation) 151 (Dual Operation) C/W Package Marking and Ordering Information Device Marking 029 (c)2006 Fairchild Semiconductor Corporation Device FDMA1029PZ Reel Size 7'' Tape width 8mm Quantity 3000 units FDMA1029PZ Rev B (W) FDMA1029PZ Dual P-Channel PowerTrench(R) MOSFET Electrical Characteristics Symbol BVDSS BVDSS TJ IDSS IGSS TA = 25C unless otherwise noted Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Body Leakage (Note 2) Test Conditions ID = -250 A VGS = 0 V, ID = -250 A, Referenced to 25C VDS = -16 V, VGS = 12 V, VGS = 0 V VDS = 0 V Min Typ Max Units -20 -12 -1 10 V mV/C A A Off Characteristics On Characteristics VGS(th) VGS(th) TJ RDS(on) Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance Forward Transconductance ID = -250 A VDS = VGS, ID = -250 A, Referenced to 25C VGS = -4.5 V, ID = -3.1 A VGS = -2.5 V, ID = -2.5 A VGS= -4.5 V, ID = -3.1 A, TJ=125C VDS = -10 V, ID = -3.1 A -0.6 -1.0 4 60 88 87 -11 -1.5 V mV/C 95 141 140 m gFS S Dynamic Characteristics Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance (Note 2) VDS = -10 V, f = 1.0 MHz V GS = 0 V, 540 120 100 pF pF pF Switching Characteristics td(on) tr td(off) tf Qg Qgs Qgd Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = -10 V, ID = -1 A, VGS = -4.5 V, RGEN = 6 13 11 37 36 24 20 59 58 10 ns ns ns ns nC nC nC VDS = -10 V, VGS = -4.5 V ID = -3.1 A, 7.0 1.1 2.4 FDMA1029PZ Rev B (W) FDMA1029PZ Dual P-Channel PowerTrench(R) MOSFET Electrical Characteristics Symbol IS VSD trr Qrr TA = 25C unless otherwise noted Parameter Test Conditions Min Typ Max Units -1.1 A V ns nC Drain-Source Diode Characteristics and Maximum Ratings Maximum Continuous Drain-Source Diode Forward Current Drain-Source Diode Forward Voltage Diode Reverse Recovery Time Diode Reverse Recovery Charge VGS = 0 V, IS = -1.1 A IF = -3.1 A, dIF/dt = 100 A/s (Note 2) -0.8 25 9 -1.2 Notes: 2 1. RJA is determined with the device mounted on a 1 in oz. copper pad on a 1.5 x 1.5 in. board of FR-4 material. RJC is guaranteed by design while RJA is determined by the user's board design. (a) RJA = 86C/W when mounted on a 1in2 pad of 2 oz copper, 1.5" x 1.5" x 0.062" thick PCB (b) RJA = 173C/W when mounted on a minimum pad of 2 oz copper (d) RJA = 151C/W when mounted on a minimum pad of 2 oz copper (c) RJA = 69C/W when mounted on a 1in2 pad of 2 oz copper, 1.5" x 1.5" x 0.062" thick PCB a) 86oC/W when mounted on a 1in2 pad of 2 oz copper b) 173oC/W when mounted on a minimum pad of 2 oz copper Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width < 300s, Duty Cycle < 2.0% FDMA1029PZ Rev B (W) FDMA1029PZ Dual P-Channel PowerTrench(R) MOSFET Typical Characteristics 6 5 -ID, DRAIN CURRENT (A) 3.5V 3.0V 2.0V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE VGS = 4 5V 2.5V 2.6 VGS = -2.0V 2.2 4 3 2 1 1.5V 1.8 1.4 -2.5V -3.0V -3.5V -4.0V 1 -4.5V 0 0 0.4 0.8 1.2 1.6 -VDS, DRAIN-SOURCE VOLTAGE (V) 2 0.6 0 1 2 3 4 -ID, DRAIN CURRENT (A) 5 6 Figure 1. On-Region Characteristics. Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 0.2 RDS(ON), ON-RESISTANCE (OHM) 1.5 RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 1.4 1.3 1.2 1.1 1 0.9 0.8 0.7 -50 -25 0 25 50 75 100 o TJ, JUNCTION TEMPERATURE ( C) 125 150 ID = -3.1A VGS = -4.5V ID = -1.55A 0.16 0.12 TA = 125 C o 0.08 TA = 25 C o 0.04 0 2 4 6 8 -VGS, GATE TO SOURCE VOLTAGE (V) 10 Figure 3. On-Resistance Variation with Temperature. 6 VDS = -5V Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 100 VGS = 0V -IS, REVERSE DRAIN CURRENT (A) 10 5 -ID, DRAIN CURRENT (A) 4 3 2 TA = 125 C o 1 TA = 125oC 25oC -55 C 0.001 o 0.1 -55 C o 0.01 1 25oC 0 0 0.5 1 1.5 2 -VGS, GATE TO SOURCE VOLTAGE (V) 2.5 0.0001 0 0.2 0.4 0.6 0.8 1 1.2 1.4 -VSD, BODY DIODE FORWARD VOLTAGE (V) 1.6 Figure 5. Transfer Characteristics. Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDMA1029PZ Rev B (W) FDMA1029PZ Dual P-Channel PowerTrench(R) MOSFET Typical Characteristics 10 -VGS, GATE-SOURCE VOLTAGE (V) ID = -3.1A 1000 f = 1MHz VGS = 0 V 800 -15V CAPACITANCE (pF) VDS = -5V 8 6 -10V 600 Ciss 400 Coss 4 2 200 Crss 0 0 2 4 6 8 10 Qg, GATE CHARGE (nC) 12 14 0 0 4 8 12 16 -VDS, DRAIN TO SOURCE VOLTAGE (V) 20 Figure 7. Gate Charge Characteristics. 100 50 Figure 8. Capacitance Characteristics. 10 RDS(ON) LIMIT 1ms 10ms 100ms 10s DC VGS = -4.5V SINGLE PULSE o RJA = 173 C/W TA = 25oC 1s 100us P(pk), PEAK TRANSIENT POWER (W) -ID, DRAIN CURRENT (A) 40 SINGLE PULSE RJA = 173C/W TA = 25C 1 30 20 0.1 10 0.01 0.1 1 10 -VDS, DRAIN-SOURCE VOLTAGE (V) 100 0 0.0001 0.001 0.01 0.1 1 10 100 1000 Figure 9. Maximum Safe Operating Area. Figure 10. Single Pulse Maximum Power Dissipation. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 1 D = 0.5 RJA(t) = r(t) * RJA RJA =173 C/W P(pk) t1 t2 TJ - TA = P * RJA(t) Duty Cycle, D = t1 / t2 0.2 0.1 0.1 0.05 0.02 0.01 SINGLE PULSE 0.01 0.0001 0.001 0.01 0.1 t1, TIME (sec) 1 10 100 1000 Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1b. Transient thermal response will change depending on the circuit board design. FDMA1029PZ Rev B (W) FDMA1029PZ Dual P-Channel PowerTrench(R) MOSFET FDMA1029PZ Rev B (W) TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FAST(R) FASTrTM ActiveArrayTM FPSTM BottomlessTM FRFETTM Build it NowTM GlobalOptoisolatorTM CoolFETTM GTOTM CROSSVOLTTM HiSeCTM DOMETM I2CTM EcoSPARKTM i-LoTM E2CMOSTM ImpliedDisconnectTM EnSignaTM IntelliMAXTM FACTTM FACT Quiet SeriesTM Across the board. Around the world.TM The Power Franchise(R) Programmable Active DroopTM ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM ScalarPumpTM SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TCMTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHCTM UniFETTM UltraFET(R) VCXTM WireTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I19 Preliminary No Identification Needed Full Production Obsolete Not In Production |
Price & Availability of FDMA1029PZ
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |
