![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Composite Transistors XN01872 (XN1872) Silicon N-channel * Enhancement MOS FET Unit: mm For switching 2.8 -0.3 0.650.15 +0.2 +0.25 1.5 -0.05 5 0.650.15 1 0.95 2.9 -0.05 1.90.1 +0.2 G G Two elements incorporated into one package. (Source-coupled FETs) Reduction of the mounting area and assembly cost by one half. 4 0.95 3 2 0.3 -0.05 0.40.2 0.16 -0.06 +0.1 1.1 -0.1 G 2SK0621(2SK621) x 2 elements 0.8 I Basic Part Number of Element I Absolute Maximum Ratings Parameter Drain to source voltage Rating Gate to source voltage of element Drain current Total power dissipation Overall Channel temperature Storage temperature Symbol VDSS VGSO ID IDM PT Tch Tstg +0.2 (Ta=25C) Ratings 50 8 100 200 300 150 -55 to +150 Unit V V mA mA mW C C 1 : Drain (Tr1) 2 : Drain (Tr2) 3 : Gate (Tr2) 0 to 0.1 0.1 to 0.3 4 : Source 5 : Gate (Tr1) EIAJ : SC-74A Mini Type Pakage (5-pin) Marking Symbol: 5U Internal Connection 5 4 3 2 FET 1 1 FET 2 I Electrical Characteristics Parameter Drain to source voltage Drain current Gate cutoff current Gate threshold voltage Drain resistance Forward transfer admittance Output voltage high level Output voltage low level Input resistance Turn-on time Turn-off time Common source short-circuit input capacitance *1 *2 (Ta=25C) Symbol VDSS IDSS IGSS Vth RDS(on) | Yfs | VOH VOL R1+R2*1 ton*2 toff*2 Ciss VDD = 5V, VGS = 0 to 5V, RL = 200 VDD = 5V, VGS = 5 to 0V, RL = 200 VDS = 5V, VGS = 0, f = 1MHz 9 Conditions ID = 100A, VGS = 0 VDS = 10V, VGS = 0 VGS = 8V, VDS = 0 ID = 100A, VDS = VGS ID = 20mA, VGS = 5V ID = 20mA, VDS = 5V, f = 1kHz VDS = 5V, VGS = 1V, RL = 200 VDS = 5V, VGS = 5V, RL = 200 100 20 4.5 1.0 200 1.0 1.0 15 30 40 1.5 min 50 10 80 3.5 50 typ max Unit V A A V mS V V k s s pF Pulse measurement Resistance ratio R1/R2 = 1/50 Note.) The Part number in the Parenthesis shows conventional part number. +0.1 1.450.1 I Features 1 Composite Transistors PT -- Ta 500 120 Ta=25C XN01872 ID -- VDS 120 VDS=5V 100 VGS=6.0V 80 5.5V 5.0V 4.5V 40 ID -- VGS Total power dissipation PT (mW) 400 100 Drain current ID (mA) Drain current ID (mA) 80 Ta=-25C 25C 300 60 60 75C 200 4.0V 3.5V 3.0V 40 100 20 20 0 0 40 80 120 160 0 0 2 4 6 8 10 0 0 2 4 6 8 10 Ambient temperature Ta (C) Drain to source voltage VDS (V) Gate to source voltage VGS (V) | Yfs | -- VDS Forward transfer admittance |Yfs| (mS) VDS=5V Ta=25C Ciss, Coss -- VDS Common source short-circuit input capacitance, Ciss, Coss (pF) Common source short-circuit output capacitance 12 VGS=0 f=1MHz Ta=25C Ciss 8 120 RDS(ON) -- VGS ID=20mA 50 40 Drain resistance RDS(on) () 10 100 80 30 6 60 Ta=75C 40 20 4 Coss 2 25C -25C 10 20 0 0 2 4 6 8 10 0 0.1 0 0.3 1 3 10 30 100 0 2 4 6 8 10 Drain to source voltage VDS (V) Drain to source voltage VDS (V) Gate to source voltage VGS (V) VIN -- IO 1000 300 VO=1V Ta=25C Input voltage VIN (V) 100 30 10 3 1 0.3 0.1 0.1 0.3 1 3 10 30 100 Output current IO (mA) 2 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of XN1872
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |