View NJM5532_280793.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NJM5532
LOW-NOISE DUAL OPERATIONAL AMPLIFIER
GENERAL DESCRIPTION PACKAGE OUTLINE The NJM5532 is a high performance dual low noise operational amplifier. Compared to the standard dual operational amplifiers, such as the NJM1458,it shows better noise performance, improved output drive capability, and considerably higher small-signal and power bandwidths. NJM5532D This makes the device especially suitable for application in high quality and professional audio equipment, instrumentation, control circuits, and telephone channel amplifiers. The op amp is internally compensated for gains equal to one if very low noise is of prime importance, version be used which has guaranteed NJM5532L NJM5532DD it is recommended that the noise specifications. FEATURES Operating Voltage Small Signal Bandwidth Output Drive Capability Input Noise Voltage Power Bandwidth Slew Rate Package Outline Bipolar Technology PIN CONFIGURATION
PIN FUNCTION 1.A OUTPUT 2.A -INPUT 3.A +INPUT 4.V 5.B +INPUT 6.B -INPUT 7.B OUTPUT + 8.V NJM5532L
NJM5532M
( 3V~20V ) ( 10MHz typ. ) ( 600,10Vrms typ. ) ( 5nV/Hz typ. ) ( 140kHz typ. ) ( 8V/s typ. ) DIP8,DMP8,SIP8
NJM5532D NJM5532M
EQUIVALENT CIRCUIT ( 1/2 Shown )
Ver.2003-03-18
-1-
NJM5532
ABSOLUTE MAXIMUM RATINGS ( Ta=25C )
PARAMETER Supply Voltage Input Voltage Differential Input Voltage Power Dissipation Operating Temperature Range Storage Temperature Range
( note ) At on a ceramic PCB ( 10x20x0.635mm )
SYMBOL +V /V VIC VID PD Topr Tstg
RATINGS 22 +V /V 0.5 ( DIP8 ) 500 ( DMP8 ) 600 ( note ) ( SIP8 ) 800 -20~+75 -40~+125
UNIT V (V) V mW C C
ELECTRICAL CHARACTERISTICS DC ELECTRICAL CHARACTERISTICS
PARAMETER Input Offset Voltage Input Offset Current Input Bias Current Operating Current Input Common Mode Voltage Range Common Mode Rejection Ratio Supply Voltage Rejection Ratio Large Signal Voltage Gain 1 Large Signal Voltage Gain 2 Maximum Output Voltage Swing 1 Maximum Output Voltage Swing 2 Input Resistance Short Circuit Current SYMBOL VIO IIO IB ICC VICM CMR SVR AV1 AV2 VOM1 VOM2 RIN IOS TEST CONDITION MIN. 12 70 80 88 83.5 12 15 30 -
( V+/V-=15V,Ta=25C )
5532 TYP. 0.5 10 200 9 13 100 100 100 94 13 16 300 38 MAX. 4 150 800 16 UNIT mV nA nA mA V dB dB dB dB V V k mA
RL2k,VO=10V RL600,VO=10V RL600 +RL600,V /V =18V
ELECTRICAL CHARACTERISTICS AC ELECTRICAL CHARACTERISTICS
PARAMETER Output Resistance Overshoot Gain Slew Rate Gain Bandwidth Product Power Bandwidth Power Bandwidth Equivalent Input Noise Voltage 1 Equivalent Input Noise Voltage 2 Equivalent Input Noise Current 1 Equivalent Input Noise Current 2 Channel Separation SYMBOL RO AV SR GB WPG WPG en1 en2 in1 in2 CS TEST CONDITION AV=30dB,f=10kHz,RL=600, AV=1 VIN=100mVP-P,CL=100pF,RL=600 f=10kHz CL=100pF,RL=600 VO=10V +VO=14V,RL=600,V /V =18V fO=30Hz fO=1kHz fO=30Hz fO=1kHz f=1kHz,RS=5k MIN. -
( V+/V-=15V,Ta=25C )
TYP. 0.3 10 67 8 10 140 100 8 5 2.7 0.7 110 MAX. UNIT % dB V/s MHz kHz kHz nV/Hz nV/Hz pA/Hz pA/Hz dB
Note: JRC's general selected products D rank are also prepared for the noise standard ( RS=2.2k,RIAA,VN=1.4V Max. )
-2-
Ver.2003-03-18
NJM5532
TYPICAL CHARACTERISTICS
Ver.2003-03-18
-3-
NJM5532
TYPICAL CHARACTERISTICS
-4-
Ver.2003-03-18
NJM5532
TYPICAL CHARACTERISTICS
NOTICE When used in voltage follower circuit, put a current limit resistor into non-inverting input terminal in order to avoid inside input diode destruction when the power supply is turned on. ( ref.Fig.1 )
1k
Fig.1
[CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.
Ver.2003-03-18
-5-

▲Up To Search▲

Price & Availability of NJM5532

	To Download NJM5532 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .