| PART |
Description |
Maker |
| TCM811 TCM811FERC TCM811LERC TCM811MERC TCM811RERC |
The TCM811 and TCM812 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. A manual reset input is provided to override the reset monitor,
4-Pin Microcontroller Reset Monitors
|
MICROCHIP[Microchip Technology]
|
| AIC811 AIC812-46PVTR AIC811-23CVBG AIC811-23CVTR A |
Reset Circuits with Manual Reset Input 复位电路，带有手动复位输
From old datasheet system
4-Pin uP Reset Circuits with Manual Reset Input
|
Analog Integrations, Corp.
AIC[Analog Intergrations Corporation]
Analog Integrations Corporation
|
| IMP1233D IMP1810 IMP1811 IMP1812 IMP1815 IMP1816 I |
4.125V power reset
RELAY 024VDC 01A DPDT-XX FORM:2C UC
Bi-Lobe Standard Metal Shell Nano Offset Connector
Low Power 5V/3.0V P Reset
Low Power/ 5V/ P Reset
Low Power, 5V, 楼矛P Reset
Low Power 5V P Reset
Low Power, 5V, P Reset
Low Power, 5V, μP Reset
4.375V power reset
|
IMP INC.
IMP Inc
IMP[IMP, Inc]
IMP[IMP Inc]
|
| CAT825MSDI-GT3 CAT824MSDI-GT3 CAT823 CAT823LSDI-GT |
System Supervisory Voltage Reset with Watchdog and Manual Reset
|
ON Semiconductor
|
| MAX792 MAX792CPE MAX792CSE MAX792EJE MAX792EPE MAX |
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.62V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy -2%
Microprocessor Voltage Monitors with Programmable Voltage Detection
Dual D-type Positive-Edge-Triggered Flip-Flops With Clear And Preset 14-CFP -55 to 125 微处理器和非挥发性内存监控电
Microprocessor and Non-Volatile Memory Supervisory Circuits
From old datasheet system
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V. Reset and low-line threshold accuracy -2%
|
MAXIM - Dallas Semiconductor
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
|
| MM1095BF MM1095 MM1095AD MM1095AF MM1095AS MM1095B |
System Reset (with built-in watchdog timer)
System Reset (Built-in Watch Dog Timer)
|
http://
Mitsumi Electronics, Corp.
MITSUMI ELECTRIC
|
| 2SD1244 0325 2SD1244Q 2SD1244R |
TRANSISTOR | BJT | NPN | 20V V(BR)CEO | 5A I(C) | SC-71 晶体管|晶体管|叩| 20V的五（巴西）总裁| 5A条一（c）|律师- 71
Low-Power, SC70/SOT µP Reset Circuits with Capacitor-Adjustable Reset Timeout Delay
From old datasheet system
|
NEC, Corp.
Matsshita / Panasonic
|
| MAX801 MAX801CPA MAX801CSA MAX801EPA MAX801ESA MAX |
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. CMOS RAM write protection..
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin μP Supervisory Circuits with ±1.5eset Accuracy
8-Pin P Supervisory Circuits with 1.5eset Accuracy
From old datasheet system
8-Pin レP Supervisory Circuits with 【1.5eset Accuracy
5015 RR 3#8 SKT RECP
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚レP监控电路与精度1.5eset
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚微处理器监控电路，提amp;plusmn;1.5%的复位门限精
Interface IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, CDIP8
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. CMOS RAM write protection..
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| MM1145 |
System Reset (with built-in watchdog timer)
From old datasheet system
|
Mitsumi
|
| PST36XX PST35XX |
CMOS System Reset
From old datasheet system
|
Mitsumi
|
| PST9139 PST9142 PST91XX PST91XXN PST9121 PST9122 P |
System Reset 系统复位
From old datasheet system
|
MITSUMI ELECTRIC CO., LTD.
MITSUMI[Mitsumi Electronics, Corp.]
MITSUMI ELECTRIC CO LTD
|
